 | This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these messages)
|
Gurpreet Singh is a professor of Mechanical and Nuclear Engineering at [Kansas State University]. He is endowed by the Harold O. and Jane C. Massey Neff Professorship in Mechanical Engineering. [1] Singh was born in Ludhiana, India; he currently resides in the United States.
Singh attended the College of Engineering, Pune and graduated with a bachelor's degree in Mechanical Engineering in 2003. He obtained his master's degree in 2006 and his doctoral degree in 2007, both in Mechanical Engineering, from the University of Colorado Boulder. His doctoral advisor was Roop Mahajan. [2] Singh's doctoral co-advisor was J. Richard McIntosh. Singh, along with J. Richard McIntosh invented the Nanoknife. [3]
Singh worked as a postdoctoral associate at Institute of Critical Technologies and Applied Science [4] at Virginia Tech, before joining as an assistant professor at Kansas State University in 2009.
Singh is the principal investigator of National Science Foundation-Partnerships in International Research and Education-Ceramics project at Kansas State University. [5] He also heads the NanoScience and Engineering lab [6] at the College of Engineering at K-State. [7]
In 2018, Singh was awarded two patents related to polymer-derived ceramics. His first patent is titled, “Aluminum-modified polysilazanes for polymer-derived ceramic nanocomposites” (United States Patent 9908905). [8] His second patent is titled, “Silicon-based polymer-derived ceramic composites comprising H-BN nanosheets” (United States Patent 10093584). [9] In 2017, he was awarded a five year, approximately $5 million grant from the National Science Foundation Partnerships for International Research and Education. [10] [11] This award is to pursue creation of high-temperature ceramics for use in gas turbine engines. These PDCs can withstand higher temperatures than metal alloys and are designed to replace metallic materials in gas turbines. This would allow gas turbines to operate at higher temperatures, which may result in increasing engine thrust by as much as 25%, while reducing fuel usage by 10%. His research on polymer derived ceramic and carbon nanotube composite thermal absorber coatings has been highlighted in National Institute of Standards and Technology (NIST) technical beat. [12] Singh's research on liquid phase exfoliation of 2-D crystals to generate atomically thin sheets of graphene oxide, tungsten and molybdenum disulfide for high capacity metal-ion batteries has appeared in top journals, including American Chemical Society [13] and Nature. [14] Singh is the recipient of the National Science Foundation CAREER Awards for his research on two-dimensional transition metal dichalcogenide and graphene materials for rechargeable metal-ion batteries. [15] Singh has more than 140 technical publications (journal papers, conference papers, patents, books and technical abstracts) to his credit. [16] Singh has a google h-index of 29. [17]
Carbon nanofibers (CNFs), vapor grown carbon fibers (VGCFs), or vapor grown carbon nanofibers (VGCNFs) are cylindrical nanostructures with graphene layers arranged as stacked cones, cups or plates. Carbon nanofibers with graphene layers wrapped into perfect cylinders are called carbon nanotubes.
Nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm) or structures having nano-scale repeat distances between the different phases that make up the material.
Carbon nanotubes (CNTs) are cylinders of one or more layers of graphene (lattice). Diameters of single-walled carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs) are typically 0.8 to 2 nm and 5 to 20 nm, respectively, although MWNT diameters can exceed 100 nm. CNT lengths range from less than 100 nm to 0.5 m.
Nanobatteries are fabricated batteries employing technology at the nanoscale, particles that measure less than 100 nanometers or 10−7 meters. These batteries may be nano in size or may use nanotechnology in a macro scale battery. Nanoscale batteries can be combined to function as a macrobattery such as within a nanopore battery.
A nanoknife is a carbon nanotube-based prototype compression cutting tool intended for sectioning of biological cells. Working principle is similar to that of a 'cheese slicer', a nanometer-thin individual carbon nanotube strung between two tungsten needles would allow sectioning of very thin slices of biological matter for imaging under an electron microscope. Tests are currently being performed by scientists at Virginia Tech, CU-Boulder and other universities. A successful development of this new tool will allow scientists and biologists to make 3D images of cells and tissues for electron tomography, which typically requires samples less than ~300 nanometers in thickness. In 2009, the nano-knife was used to create indentation marks on biological cell plasticizer. The whole cutting process is currently limited by electron charging of polymeric specimen in the SEM, which makes it difficult to observe any small cut or mark as the carbon nanotube is pressed against the specimen.
In organosilicon chemistry, polysilazanes are polymers in which silicon and nitrogen atoms alternate to form the basic backbone. Since each silicon atom is bound to two separate nitrogen atoms and each nitrogen atom to two silicon atoms, both chains and rings of the formula [R2Si−NR]n occur. R can be hydrogen atoms or organic substituents. If all substituents R are hydrogen atoms, the polymer is designated as perhydropolysilazane, polyperhydridosilazane, or inorganic polysilazane ([H2Si−NH]n). If hydrocarbon substituents are bound to the silicon atoms, the polymers are designated as Organopolysilazanes. Molecularly, polysilazanes [R2Si−NH]n are isoelectronic with and close relatives to polysiloxanes [R2Si−O]n (silicones).
A supercapacitor (SC), also called an ultracapacitor, is a high-capacity capacitor, with a capacitance value much higher than solid-state capacitors but with lower voltage limits. It bridges the gap between electrolytic capacitors and rechargeable batteries. It typically stores 10 to 100 times more energy per unit volume or mass than electrolytic capacitors, can accept and deliver charge much faster than batteries, and tolerates many more charge and discharge cycles than rechargeable batteries.
Jonathan Coleman is the Erasmus Smith's Professor of Natural and Experimental Philosophy in the School of Physics and a Principal Investigator in CRANN at Trinity College Dublin. Coleman's research focuses on solution-processing of nanomaterials and their use in applications. He is most well known for the development of liquid phase exfoliation, a widely used method for preparing two-dimensional nanosheets.
OCSiAl is a global nanotechnology company, the world's largest graphene nanotube manufacturer, conducting its operations worldwide. The OCSiAl headquarters are located in Luxembourg, with several offices in the United States, Europe and Asia.
Yury Georgievich Gogotsi is a scientist in the field of material chemistry, professor at Drexel University, Philadelphia, United States since 2000 in the fields of Materials Science and Engineering and Nanotechnology. Distinguished University and Trustee Chair professor of materials science at Drexel University — director of the A.J. Drexel Nanotechnology Institute.
Alan T. Charlie Johnson is an American physicist and a professor in physics and astronomy at the University of Pennsylvania. Johnson currently serves as the founding executive editor of the scientific journal AIP Advances and the co-founder of Graphene Frontiers, LLC.
Apparao M Rao is the Robert A. Bowen Endowed Professor of Physics in the department of physics and astronomy, the founding director of the Clemson Nanomaterials Institute, and a former associate dean for discovery in the college of science at Clemson University. His research in nanoscience and nanotechnology has been cited over 54,600 times in open literature and his h-index is 98. He is a Fellow of the American Physical Society, the American Association for the Advancement of Science, the National Academy of Inventors, and the Materials Research Society. In 2012, he received the Alumni Award for Outstanding Achievements in Research, and has served on the Advisory Panel for the Dean and the Vice-President of Research, Clemson University. His research and development efforts led to the establishment of Clemson Nanomaterials Institute, which supports sustainable research and development capacity and competitiveness in the U.S. and the State of South Carolina. The State of South Carolina conferred on him its highest honor - the 2014 Governor’s award for excellence in scientific research.
In materials science, a polymer matrix composite (PMC) is a composite material composed of a variety of short or continuous fibers bound together by a matrix of organic polymers. PMCs are designed to transfer loads between fibers of a matrix. Some of the advantages with PMCs include their light weight, high resistance to abrasion and corrosion, and high stiffness and strength along the direction of their reinforcements.
Andrew R. Barron is a British chemist, academic, and entrepreneur. He is the Sêr Cymru Chair of Low Carbon Energy and Environment at Swansea University, and the Charles W. Duncan Jr.-Welch Foundation Chair in Chemistry at Rice University. He is the founder and director of Energy Safety Research Institute (ESRI) at Swansea University, which consolidates the energy research at the University with a focus on environmental impact and future security. At Rice University, he leads a Research Group and has served as Associate Dean for Industry Interactions and Technology Transfer.
Alan Kin-tak Lau is a Hong Kong engineer and academic. He is the president and chair professor of product innovation at Technological and Higher Education Institute (Thei) of Hong Kong. Prior to this appointment, he was pro vice-chancellor at Swinburne University of Technology. He is also the Independent non-executive director of King’s Flair International (Holdings) Limited, the international vice president and trustee board member of The Institution of Mechanical Engineers (2014-2019) and an academic advisor at Asia University. He was also appointed the chair of professional accreditation panel for APEC/IPEA for Korea. From 2014 to 2016, he was the Alex Wong/Gigi Wong Endowed Professor in Product Engineering Design at the Hong Kong Polytechnic University (HPKU). Currently, he is a Fellow of European Academy of Sciences and Arts, the European Academy of Sciences. Lau has conducted research in the field of mechanical engineering, aerospace engineering and materials engineering. His work has been focused on aerospace composites, unmanned aerial vehicle, product design and engineering and bio-composites. Lau is recognized as Australian National Research Leader in Composite Materials 2019, published by The Australian Post. Within the period 2020-2022, he was director of Oceania Cybersecurity Centre Limited and Stawell Underground Physics Laboratory Company. He has been named as “2023 年度傑出人物” and “2024 年度全球傑出華人領袖”. Currently, he has been appointed as 中氫聚力首席技術官, 莞港創科合作顧問委員會成員 and 力嘉（上海）新能源有限公司首席顧. Dr. Lau also established two academician workstations (院士工作站) with Basalt Fibre Composites Development Company Limited and Hebei University of Technology supported by Sichuan’s and Tianjin’s provincial Governments, respectively to support the conversion of new technologies, like basalt fibre reinforced polymer composites and 3D printed concrete bridges to the industry.
Polymer derived ceramics (PDCs) are ceramic materials formed by the pyrolysis of preceramic polymers, usually under inert atmosphere.
Jodie L. Lutkenhaus is a Professor of Chemical Engineering at Texas A&M University who develops redox active polymers for energy storage and smart coatings. In 2019 Lutkenhaus and Karen L. Wooley demonstrated the world's first biodegradable peptide battery. Lutkenhaus is a World Economic Forum Young Scientist.
Linda Sue Schadler is the Dean of the College of Engineering and Mathematical Sciences, and acting provost and senior vice president at the University of Vermont. Her research investigates the mechanical, optical and electric behaviour of polymer composites. She is a Fellow of the Materials Research Society and ASM International.
André Taylor is an American scientist who is an associate professor of chemical engineering at the New York University Tandon School of Engineering. Taylor works on novel materials for energy conversion and storage. He was awarded the Presidential Early Career Award for Scientists and Engineers in 2010, and named as one of The Community of Scholars' Most Influential Black Researchers of 2020.
Jaime C. Grunlan is a material scientist and academic. He is a Professor of Mechanical Engineering, and Leland T. Jordan ’29 Chair Professor at Texas A&M University.
| Authority control databases: Academics |
|---|
