Cleopatra saluting the Brazilian flag at Rio de Janeiro in 1890, the formal recognition of the Republic of Brazil by Great Britain | |
History | |
---|---|
United Kingdom | |
Name | HMS Cleopatra |
Builder | John Elder & Co Govan [1] |
Yard number | 209 [1] |
Launched | 1 August 1878 [1] |
Name | HMS Defiance III [1] |
Renamed | 1922 [1] |
Fate | Sold for scrap to S Castle, Millbay, July 1931 [1] |
General characteristics | |
Class and type | Comus-class corvette |
Displacement | 2,380 long tons (2,420 t) [1] |
Length | 225 ft (69 m) [1] |
Beam | 44 ft 6 in (13.6 m) [1] |
Draught | 19 ft 6 in (6 m) [1] |
Propulsion | Sail, engines by Humphrys, Tennant & Co. [1] |
HMS Cleopatra was a Royal Navy Comus-class screw corvette built in 1878.
Planning for six metal-hulled corvettes began in 1876; [2] these became the Comus-class corvettes and [3] were designed for long voyages away from coaling stations. [2] Given a metal hull, [3] its frame was composed of iron or steel. [4] Its hull had copper sheathing over timber beneath the waterline, but that timber simply served to separate the iron hull from the copper sheathing so as to prevent electrolytic corrosion. [5] The timber extended to the upper deck; it was in two layers from the keel to 3 ft (.9 m) above the water line, and one layer above. [6]
It was fitted with 3-cylinder compound engines with one high-pressure cylinder of 46 inches (1,200 mm) diameter being flanked by two low-pressure cylinders of 64 inches (1,600 mm) diameter. The bow above the waterline was nearly straight, in contrast to that of wooden sailing ships. It had stern galleries, similar to older frigates, but the ports were false, and there were no quarter galleries. [7] Boats were carried both amidships and at the stern. [8] Cleopatra flew a barque or ship rig of sail on three masts, including studding sails on fore and mainmasts. [9]
Between its two complete decks was the open quarterdeck, on which the battery was located. Under the lower deck were spaces for water, provisions, coal, and magazines for shell and powder. Amidships were the engine and boiler rooms. These were covered by an armoured deck, 1.5 inches (38 mm) thick and approximately 100 ft (30 m) long. This armour was about 3 ft (90 cm) below the lower deck, and the space between could be used for additional coal bunkerage. The machinery spaces were flanked by coal bunkers, affording the machinery and magazines some protection from the sides. The lower deck was used for berthing of the ship's company; officers aft, warrant and petty officers forward, and ratings amidships, as was traditional. The tops of the coal bunkers, which projected above deck level, were used for seating at the mess tables. The living spaces were well-ventilated and an improvement over prior vessels. [10]
On 18 December 1878, Cleopatra ran into the steamship Lord Gough in the Clyde, severely damaging her. [11]
Cleopatra was used as a training cruiser in 1902 and visited Jersey in June 1902, [12] Guernsey two months later, then toured various parts of British waters until late September, with a break taking part in the Coronation Fleet review at Spithead on 16 August 1902. [13] During late Autumn she visited the Spanish cities of Vigo and Málaga in early November 1902, [14] then Gibraltar, the island of Madeira and the Spanish cities of Ferrol and Vilagarcía. [15] [16] Her winter cruise from late January to April 1903 took her to Arosa Bay, Gibraltar, Port Mahon, Palma, Cadiz and Vigo. [17]
HMS Thunderer was one of two Devastation-class ironclad turret ships built for the Royal Navy in the 1870s. She suffered two serious accidents before the decade was out and gained a reputation as an unlucky ship for several years afterward. The ship was assigned to the Mediterranean Fleet in 1878 and was reduced to reserve in 1881 before being recommissioned in 1885. Thunderer returned home in 1887 and was again placed in reserve. She rejoined the Mediterranean Fleet in 1891, but was forced to return to the UK by boiler problems the following year. The ship became a coast guard ship in Wales in 1895 and was again placed in reserve in 1900. Thunderer was taken out of service in 1907 and sold for scrap in 1909.
The eighth HMS Shannon was the first British armoured cruiser. She was the last Royal Navy ironclad to be built which had a propeller that could be hoisted out of the water to reduce drag when she was under sail, and the first to have an armoured deck.
HMS Audacious was the lead ship of the Audacious-class ironclads built for the Royal Navy in the late 1860s. They were designed as second-class ironclads suitable for use on foreign stations and the ship spent the bulk of her career on the China Station. She was decommissioned in 1894 and hulked in 1902 for use as a training ship. The ship was towed to Scapa Flow after the beginning of the First World War to be used as a receiving ship and then to Rosyth after the war ended. Audacious was sold for scrap in 1929.
HMS Lord Warden was the second and last ship of the wooden-hulled Lord Clyde class of armoured frigates built for the Royal Navy (RN) during the 1860s. She and her sister ship, Lord Clyde, were the heaviest wooden ships ever built and were also the fastest steaming wooden ships. They were also the slowest-sailing ironclads in the RN.
HMS Monarch was the first seagoing British warship to carry her guns in turrets, and the first British warship to carry guns of 12-inch (300 mm) calibre.
HMS Narcissus was one of seven Orlando-class armoured cruisers built for the Royal Navy in the mid-1880s. Future Admiral Ernest Gaunt served aboard her in 1896 as First Lieutenant. She was sold for scrapping on 11 September 1906.
HMS Immortalité was one of seven Orlando-class armoured cruisers built for the Royal Navy in the mid-1880s. She was sold for scrap on 11 January 1907.
HMS Calliope was a Calypso-class corvette of the Royal Navy of the United Kingdom which served from 1887 until 1951. Exemplifying the transitional nature of the late Victorian navy, Calliope was a sailing corvette—the last such ship built for the Royal Navy—but supplemented the full sail rig with a powerful engine. Steel was used for the hull, and like the earlier iron-hulled corvettes, Calliope was cased with timber and coppered below the waterline, in the same manner as wooden ships.
HMS Calypso was a corvette of the Royal Navy and the lead ship of her namesake class. Built for distant cruising in the heyday of the British Empire, the vessel served as a warship and training vessel until 1922, when she was sold.
The Calypso class comprised two steam corvettes of the Royal Navy. Built for distant cruising in the heyday of the British Empire, they served with the fleet until the early twentieth century, when they became training ships. Remnants of both survive, after a fashion; HMS Calliope in the name of the naval reserve unit the ship once served, and HMS Calypso both in the name of a civilian charity and the more corporeal form of the hull, now awash in a cove off Newfoundland.
The Comus class was a class of Royal Navy steam corvettes, re-classified as third-class cruisers in 1888. All were built between 1878 and 1881. The class exemplifies the transitional nature of the late Victorian navy. In design, materials, armament, and propulsion the class members resemble their wooden sailing antecedents, but blended with characteristics of the all-metal mastless steam cruisers which followed.
HMS Comus was a corvette of the Royal Navy. She was the name ship of her class. Launched in April 1878, the vessel was built by Messrs. J. Elder & Co of Glasgow at a cost of £123,000.
HMS Cyclops was the lead ship of the Cyclops-class breastwork monitors built for the Royal Navy during the 1870s. The ships were ordered to satisfy demands for local defence during the war scare of 1870, but the pace of construction slowed tremendously as the perceived threat of war declined. The ship spent most of her career in reserve; her only sustained period in commission was four months in Portland Harbour, during the Russo-Turkish War in 1878 when the British were trying to force the Russians to end the war without allowing them to seize Constantinople. Cyclops was sold for scrap in 1903.
HMS Cordelia was a Comus-class corvette of the Royal Navy, built at the Portsmouth Dockyard and launched on 25 October 1881.
HMS Curacoa was a Comus-class corvette of the Royal Navy, built by John Elder & Co., Govan, launched in 1878, and sold in 1904 to be broken up. She served on the Cape of Good Hope and West Africa Station, the Australia Station and as a training cruiser in the Atlantic.
HMS Constance was a Comus-class steel corvette of the Royal Navy. She was launched from Chatham Dockyard on 9 June 1880.
HMS Champion was one of nine Comus-class corvettes of the Royal Navy, built in the late 1870s and early 1880s to a design by Nathaniel Barnaby. Champion was one of three in the class built by J. Elder & Co., Govan, Scotland and was launched on 1 July 1878. She was the third vessel under this name in the Royal Navy.
HMS Canada was a Comus-class screw corvette of the Royal Navy. She was launched in 1881 and sold for scrap in 1897. Her bow badge was removed prior to being sold for scrap and is displayed in the Maritime Museum of British Columbia.
Cristoforo Colombo was a screw corvette of the Italian Regia Marina built in the 1870s.
HMS Ruby was an Emerald-class composite screw corvette that served in the Victorian Royal Navy. The Emerald class was a development of the wooden Amethyst class but combined an iron frame and teak cladding. Launched in 1876, Ruby was commissioned to the East Indies Station, serving between Burma, Ceylon, Madras and other important parts of the British Empire. Transferred to operating in the Mediterranean Sea, the vessel supported humanitarian efforts during the 1878 Macedonian rebellion and then the British forces during the Anglo-Egyptian War of 1882. The corvette served in the South East Coast of America Station from 1885, retiring in 1904. After a period as a coal hulk with the name C.10, Ruby was sold in 1921 to be broken up.