Heavy Rydberg system

Last updated August 11, 2023

A heavy Rydberg system consists of a weakly bound positive and negative ion orbiting their common centre of mass. Such systems share many properties with the conventional Rydberg atom and consequently are sometimes referred to as heavy Rydberg atoms. While such a system is a type of ionically bound molecule, it should not be confused with a molecular Rydberg state, which is simply a molecule with one or more highly excited electrons.

The peculiar properties of the Rydberg atom come from the large charge separation and the resulting hydrogenic potential. The extremely large separation between the two components of a heavy Rydberg system results in an almost perfect 1/r hydrogenic potential seen by each ion. The positive ion can be viewed as analogous to the nucleus of a hydrogen atom, with the negative ion playing the role of the electron.^[1]

Species

The most commonly studied system to date is the $H^{+}/H^{-}$ system, consisting of a proton bound with a $H^{-}$ ion. The $H^{+}/H^{-}$ system was first observed in 2000 by a group at the University of Waterloo in Canada.

The formation of the $H^{-}$ ion can be understood classically; as the single electron in a hydrogen atom cannot fully shield the positively charged nucleus, another electron brought into close proximity will feel an attractive force. While this classical description is nice for getting a feel for the interactions involved, it is an oversimplification; many other atoms have a greater electron affinity than hydrogen. In general the process of forming a negative ion is driven by the filling of atomic electron shells to form a lower energy configuration.

Only a small number of molecules have been used to produce heavy Rydberg systems although in principle any atom with a positive electron affinity can bind with a positive ion. Species used include $O_{2}$ , $H_{2}S$ and $HF$ . Fluorine and oxygen are particularly favoured due to their high electron affinity, high ionisation energy and consequently high electronegativity.

Production

The difficulty in the production of heavy Rydberg systems arises in finding an energetic pathway by which a molecule can be excited with just the right energy to form an ion pair, without sufficient internal energy to cause autodissociation (a process analogous to autoionization in atoms) or rapid dissociation due to collisions or local fields.

Currently production of heavy Rydberg systems relies on complex vacuum ultra-violet (so called because it is strongly absorbed in air and requires the entire system to be enclosed within a vacuum chamber) or multi-photon transitions (relying on absorption of multiple photons almost simultaneously), both of which are rather inefficient and result in systems with high internal energy.

Features

The bond length in a heavy Rydberg system is 10,000 times larger than in a typical diatomic molecule. As well as producing the characteristic hydrogen-like behaviour, this also makes them extremely sensitive to perturbation by external electric and magnetic fields.

Heavy Rydberg systems have a relatively large reduced mass, given by:

\mu ={m_{1}m_{2} \over m_{1}+m_{2}}

This leads to a very slow time evolution, which makes them easy to manipulate both spatially and energetically, while their low binding energy makes them relatively simple to detect through field dissociation and detection of the resulting ions, in a process known as threshold ion-pair production spectroscopy.

Kepler's third law states that the period of an orbit is proportional to the cube of the semi-major axis; this can be applied to the Coulomb force:

\tau ^{2}={4\pi ^{2}\mu  \over kZe^{2}}a^{3}

where $\tau$ is the time-period, $\mu$ is the reduced mass, $a$ is the semi-major axis and $k=1/(4\pi \epsilon _{0})$ .

Classically we can say that a system with a large reduced mass has a long orbital period. Quantum mechanically, a large reduced mass in a system leads to narrow spacing of the energy levels and the rate of time-evolution of the wavefunction depends on this energy spacing. This slow time-evolution makes heavy Rydberg systems ideal for experimentally probing the dynamics of quantum systems.

Related Research Articles

In atomic physics, the Bohr model or Rutherford–Bohr model of the atom, presented by Niels Bohr and Ernest Rutherford in 1913, consists of a small, dense nucleus surrounded by orbiting electrons. It is analogous to the structure of the Solar System, but with attraction provided by electrostatic force rather than gravity. In the history of atomic physics, it followed, and ultimately replaced, several earlier models, including Joseph Larmor's Solar System model (1897), Jean Perrin's model (1901), the cubical model (1902), Hantaro Nagaoka's Saturnian model (1904), the plum pudding model (1904), Arthur Haas's quantum model (1910), the Rutherford model (1911), and John William Nicholson's nuclear quantum model (1912). The improvement over the 1911 Rutherford model mainly concerned the new quantum mechanical interpretation introduced by Haas and Nicholson, but forsaking any attempt to explain radiation according to classical physics.

A hydrogen atom is an atom of the chemical element hydrogen. The electrically neutral atom contains a single positively charged proton and a single negatively charged electron bound to the nucleus by the Coulomb force. Atomic hydrogen constitutes about 75% of the baryonic mass of the universe.

<span class="mw-page-title-main">Paramagnetism</span> Weak, attractive magnetism possessed by most elements and some compounds

Paramagnetism is a form of magnetism whereby some materials are weakly attracted by an externally applied magnetic field, and form internal, induced magnetic fields in the direction of the applied magnetic field. In contrast with this behavior, diamagnetic materials are repelled by magnetic fields and form induced magnetic fields in the direction opposite to that of the applied magnetic field. Paramagnetic materials include most chemical elements and some compounds; they have a relative magnetic permeability slightly greater than 1 and hence are attracted to magnetic fields. The magnetic moment induced by the applied field is linear in the field strength and rather weak. It typically requires a sensitive analytical balance to detect the effect and modern measurements on paramagnetic materials are often conducted with a SQUID magnetometer.

<span class="mw-page-title-main">Exciton</span> Quasiparticle which is a bound state of an electron and an electron hole

An exciton is a bound state of an electron and an electron hole which are attracted to each other by the electrostatic Coulomb force. It is an electrically neutral quasiparticle that exists in insulators, semiconductors and some liquids. The exciton is regarded as an elementary excitation of condensed matter that can transport energy without transporting net electric charge.

A quantum mechanical system or particle that is bound—that is, confined spatially—can only take on certain discrete values of energy, called energy levels. This contrasts with classical particles, which can have any amount of energy. The term is commonly used for the energy levels of the electrons in atoms, ions, or molecules, which are bound by the electric field of the nucleus, but can also refer to energy levels of nuclei or vibrational or rotational energy levels in molecules. The energy spectrum of a system with such discrete energy levels is said to be quantized.

In physics and chemistry, ionization energy (IE) (American English spelling), ionisation energy (British English spelling) is the minimum energy required to remove the most loosely bound electron of an isolated gaseous atom, positive ion, or molecule. The first ionization energy is quantitatively expressed as

The Bohr radius (a₀) is a physical constant, approximately equal to the most probable distance between the nucleus and the electron in a hydrogen atom in its ground state. It is named after Niels Bohr, due to its role in the Bohr model of an atom. Its value is 5.29177210903(80)×10⁻¹¹ m.

In spectroscopy, the Rydberg constant, symbol $for heavy atoms or for hydrogen, named after the Swedish physicist Johannes Rydberg, is a physical constant relating to the electromagnetic spectra of an atom. The constant first arose as an empirical fitting parameter in the Rydberg formula for the hydrogen spectral series, but Niels Bohr later showed that its value could be calculated from more fundamental constants according to his model of the atom.$

In thermodynamics, the chemical potential of a species is the energy that can be absorbed or released due to a change of the particle number of the given species, e.g. in a chemical reaction or phase transition. The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. Thus, it is the partial derivative of the free energy with respect to the amount of the species, all other species' concentrations in the mixture remaining constant. When both temperature and pressure are held constant, and the number of particles is expressed in moles, the chemical potential is the partial molar Gibbs free energy. At chemical equilibrium or in phase equilibrium, the total sum of the product of chemical potentials and stoichiometric coefficients is zero, as the free energy is at a minimum. In a system in diffusion equilibrium, the chemical potential of any chemical species is uniformly the same everywhere throughout the system.

<span class="mw-page-title-main">Rydberg formula</span> Formula for spectral line wavelengths in alkali metals

In atomic physics, the Rydberg formula calculates the wavelengths of a spectral line in many chemical elements. The formula was primarily presented as a generalization of the Balmer series for all atomic electron transitions of hydrogen. It was first empirically stated in 1888 by the Swedish physicist Johannes Rydberg, then theoretically by Niels Bohr in 1913, who used a primitive form of quantum mechanics. The formula directly generalizes the equations used to calculate the wavelengths of the hydrogen spectral series.

In electromagnetism, the magnetic moment is the magnetic strength and orientation of a magnet or other object that produces a magnetic field. Examples of objects that have magnetic moments include loops of electric current, permanent magnets, elementary particles, various molecules, and many astronomical objects.

In condensed matter physics, scintillation is the physical process where a material, called a scintillator, emits ultraviolet or visible light under excitation from high energy photons or energetic particles. See scintillator and scintillation counter for practical applications.

A Rydberg atom is an excited atom with one or more electrons that have a very high principal quantum number, n. The higher the value of n, the farther the electron is from the nucleus, on average. Rydberg atoms have a number of peculiar properties including an exaggerated response to electric and magnetic fields, long decay periods and electron wavefunctions that approximate, under some conditions, classical orbits of electrons about the nuclei. The core electrons shield the outer electron from the electric field of the nucleus such that, from a distance, the electric potential looks identical to that experienced by the electron in a hydrogen atom.

The Franck–Condon principle is a rule in spectroscopy and quantum chemistry that explains the intensity of vibronic transitions. The principle states that during an electronic transition, a change from one vibrational energy level to another will be more likely to happen if the two vibrational wave functions overlap more significantly.

The emission spectrum of atomic hydrogen has been divided into a number of spectral series, with wavelengths given by the Rydberg formula. These observed spectral lines are due to the electron making transitions between two energy levels in an atom. The classification of the series by the Rydberg formula was important in the development of quantum mechanics. The spectral series are important in astronomical spectroscopy for detecting the presence of hydrogen and calculating red shifts.

Quantum electrodynamics (QED), a relativistic quantum field theory of electrodynamics, is among the most stringently tested theories in physics. The most precise and specific tests of QED consist of measurements of the electromagnetic fine-structure constant, α, in various physical systems. Checking the consistency of such measurements tests the theory.

A hydrogen-like atom (or hydrogenic atom) is any atom or ion with a single valence electron. These atoms are isoelectronic with hydrogen. Examples of hydrogen-like atoms include, but are not limited to, hydrogen itself, all alkali metals such as Rb and Cs, singly ionized alkaline earth metals such as Ca⁺ and Sr⁺ and other ions such as He⁺, Li²⁺, and Be³⁺ and isotopes of any of the above. A hydrogen-like atom includes a positively charged core consisting of the atomic nucleus and any core electrons as well as a single valence electron. Because helium is common in the universe, the spectroscopy of singly ionized helium is important in EUV astronomy, for example, of DO white dwarf stars.

In atomic physics, a two-electron atom or helium-like ion is a quantum mechanical system consisting of one nucleus with a charge of Ze and just two electrons. This is the first case of many-electron systems where the Pauli exclusion principle plays a central role.

Triatomic hydrogen or H₃ is an unstable triatomic molecule containing only hydrogen. Since this molecule contains only three atoms of hydrogen it is the simplest triatomic molecule and it is relatively simple to numerically solve the quantum mechanics description of the particles. Being unstable the molecule breaks up in under a millionth of a second. Its fleeting lifetime makes it rare, but it is quite commonly formed and destroyed in the universe thanks to the commonness of the trihydrogen cation. The infrared spectrum of H₃ due to vibration and rotation is very similar to that of the ion, H⁺
₃. In the early universe this ability to emit infrared light allowed the primordial hydrogen and helium gas to cool down so as to form stars.

Magnetochemistry is concerned with the magnetic properties of chemical compounds. Magnetic properties arise from the spin and orbital angular momentum of the electrons contained in a compound. Compounds are diamagnetic when they contain no unpaired electrons. Molecular compounds that contain one or more unpaired electrons are paramagnetic. The magnitude of the paramagnetism is expressed as an effective magnetic moment, μ_eff. For first-row transition metals the magnitude of μ_eff is, to a first approximation, a simple function of the number of unpaired electrons, the spin-only formula. In general, spin–orbit coupling causes μ_eff to deviate from the spin-only formula. For the heavier transition metals, lanthanides and actinides, spin–orbit coupling cannot be ignored. Exchange interaction can occur in clusters and infinite lattices, resulting in ferromagnetism, antiferromagnetism or ferrimagnetism depending on the relative orientations of the individual spins.

References

↑ Reinhold, Elmar; Ubachs *, Wim (20 May 2005). "Heavy Rydberg states" (PDF). Molecular Physics. Informa UK Limited. 103 (10): 1329–1352. doi:10.1080/00268970500050621. ISSN 0026-8976. S2CID 18950981.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Reinhold, Elmar; Ubachs *, Wim (20 May 2005). "Heavy Rydberg states" (PDF). Molecular Physics. Informa UK Limited. 103 (10): 1329–1352. doi:10.1080/00268970500050621. ISSN 0026-8976. S2CID 18950981.

[1]