J-3 Kitten | |
---|---|
J-3 Kitten at Caboolture Airfield. | |
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Hipp's Superbirds |
Designer | Jesse Anglin |
First flight | 1986 |
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina. [1] [2] [3] [4]
The J-3, J-4 and Reliant designs are intended to have empty weights under 254 lb (115 kg), and fit into the US ultralight category. The remaining designs are heavier and fit into the US Experimental - Amateur-built category. [4]
The Hipp's J-3, J-5 and Reliant are all very similar aircraft developed from the original J-4, and differing only in fuselage design and wingspan. [1]
All aircraft in the series have a 4130 steel tube fuselage and tail assembly. The wings are built from wood, and both the fuselage and wings are covered with doped aircraft fabric. The engine cowlings are composite. Floats and skis are available. Construction times are estimated as 300 hours from the kit and 800 hours from plans. [1] [4]
The wings of all the aircraft in the series are detachable for transport or storage. [2]
The aircraft in the series are described by reviewer Andre Cliche as being "docile, predictable and forgiving aircraft that can be handled safely by novice pilots." [1]
The Reliant was first displayed at Oshkosh in 1987 where it received the Grand Champion and Charles Lindbergh awards. [4]
Data from Cliche, Kitplanes and Purdy [1] [2] [3] [4]
General characteristics
Performance
Avionics
Aircraft of comparable role, configuration, and era
The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.
The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.
The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.
The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.
The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Wood Sky Pup is an American single-seat, high wing, cantilever, single engine, conventional landing gear ultralight aircraft that was designed by Stephen K. Wood of Whitewater, Colorado for amateur construction.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.
The LiteWing Aircraft LiteWing, also called the Lite Wing Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied as a kit for amateur construction.
The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.
The Norman Aviation J6 Karatoo is a Canadian advanced ultralight aircraft, that was designed by Jesse Anglin, and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft was supplied as a kit for amateur construction, or as a complete ready-to-fly-aircraft.
The Anglin J6 Karatoo is an Australian ultralight and light-sport aircraft that was designed by Jesse Anglin and introduced in 1982. Over the years the J6 Karatoo has been produced by several different manufacturers, including Amax Engineering of Donvale, Victoria, Skyway Aircraft and is currently built by Serenity Aviation of Australia. The aircraft is supplied as plans or as a kit for amateur construction.