Hutchinson HS-127

Last updated

HS-127
Role Glider
National origin United States
Designer Vernon Hutchinson
First flight1956
Introduction1956
Number builtOne

The Hutchinson HS-127 is an American mid-wing glider that was designed and built by Vernon Hutchinson. [1] [2]

Contents

Design and development

The HS-127 was designed and built by Hutchinson in 1956 as a single seat, V-tailed aircraft that incorporated spoilers mounted in the fuselage sides, above the wing roots. The aircraft was constructed from aluminium and employed a NACA 65 (3)-618 airfoil. [1]

In 1960 Hutchinson constructed a new fuselage for the aircraft with two seats in tandem and a conventional tail. The wings from the earlier single seat fuselage were used on the new fuselage. The designer incorporated split trailing edge dive brakes and claims this was the first use of balanced trailing edge dive brakes. Both versions of the aircraft bore the same Federal Aviation Administration aircraft registration, N62P. [1]

The aircraft's HS designation indicates Hutchinson Sailplane. [2]

Operational history

Hutchinson completed his Silver badge and Gold badge while flying the HS-127 and also flew a number of 200 mi (322 km) flights in it. In May 2011 the aircraft was still registered to Hutchinson, 55 years after its completion. [1] [2]

Specifications (HS-127 two seater)

Data from Soaring [1]

General characteristics

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Schweizer SGS 1-29</span> American sailplane

The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.

<span class="mw-page-title-main">Leonard Annebula</span> American glider

The Leonard Annebula is an American high-wing, single-seat FAI Standard Class glider designed by Bob Leonard of Wichita, Kansas, based on the Hall Cherokee II.

The Laister LP-46 and LP-49 are a family of American high-wing, single-seat, gliders that were designed by Jack Laister and produced by Laister Sailplanes both as kit aircraft and as certified complete aircraft.

<span class="mw-page-title-main">Schreder Airmate HP-11</span> US single-seat glider, 1962

The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.

<span class="mw-page-title-main">Bowlus BZ-1</span> American glider

The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.

The Chase-Sisley C100-S is an American mid-wing, single seat FAI Open Class glider that was designed in the 1960s by Dr. Robert Chase.

<span class="mw-page-title-main">Kohler Alpha</span> American rglider

The Kohler Alpha is an American, mid-wing, V-tailed, FAI Open Class single seat glider that was designed and built by Spud Kohler of Cleveland, Ohio.

The Oldershaw O-2, officially registered as the Oldershaw Jana-Linn O-2, is an American high-wing, single seat, V-tailed glider that was designed and built by Vernon Oldershaw.

<span class="mw-page-title-main">Melsheimer FM-1</span> 1968 American glider

The Melsheimer FM-1 is an American single-seat, high-wing, FAI Open Class glider that was designed and constructed by Frank Melsheimer.

The Moore SS-1 is an American high-wing, single seat, FAI Standard Class glider that was designed and constructed by Arien C. Moore of Sweet Home, Oregon.

The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.

<span class="mw-page-title-main">Prue Two</span> American glider

The Prue Two was an American high-wing, two-seat glider that was designed and built by Irving Prue, first flying in 1959.

The Prue IIA is an American, high-wing, two-seat, T-tailed glider that was designed by Irving Prue and constructed by Ed Minghelle of Palmdale, California.

The Prue UHP-1 is an American high-wing, single-seat, T-tailed FAI Open Class glider that was designed by Irving Prue.

<span class="mw-page-title-main">Prue Standard</span> American glider

The Prue Standard is an American high-wing, single-seat, V-tailed, FAI Standard Class glider that was designed by Irving Prue.

The Prue Super Standard is an American, high-wing, single-seat, FAI Standard Class glider that was designed by Irving Prue in 1962 as a development of the Prue Standard.

<span class="mw-page-title-main">Fibera KK-1e Utu</span> Type of aircraft

The Fibera KK-1e Utu is a Finnish mid-wing, T-tailed, single-seat, FAI Standard Class glider that was designed by Ahto Anttila and produced by Fibera in the 1960s.

<span class="mw-page-title-main">Scheibe Zugvogel</span> German single-seat glider, 1954

The Scheibe Zugvogel is a West German, high-wing, single-seat, FAI Open Class glider that was produced by Scheibe Flugzeugbau. The first version was designed by Rudolph Kaiser and subsequent versions by Egon Scheibe.

<span class="mw-page-title-main">Schleicher Condor</span> German glider family designed by Heini Dittmar, 1932

The Schleicher Condor, also referred to as the Dittmar Condor, is a series of German high-wing, single and two-seat, gull winged, gliders that were designed by Heini Dittmar in the 1930s, produced in small quantities before the Second World War, produced again between 1952 and 1955 by Alexander Schleicher GmbH & Co and also by Ferdinand Schmetz.

<span class="mw-page-title-main">Peterson MAP-3 Medena</span> American glider

The Peterson MAP-3 Medena is an American shoulder-wing, single-seat, FAI Open Class glider that was designed and constructed by Max A. Peterson, first flying in 1966.

References

  1. 1 2 3 4 5 Said, Bob: 1983 Sailplane Directory, Soaring Magazine , page 44. Soaring Society of America November 1983. USPS 499-920
  2. 1 2 3 Federal Aviation Administration (May 2011). "Make / Model Inquiry Results". Archived from the original on August 12, 2012. Retrieved May 15, 2011.