| Skyboy | |
|---|---|
 | |
| Role | Ultralight aircraft & Light-sport aircraft |
| National origin | Czech Republic |
| Manufacturer | InterPlane Aircraft |
| First flight | 1992 |
| Introduction | 1992 |
| Status | Production completed |
| Number built | 100 [1] |
The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic. [2] [3] [4]
The Skyboy was designed in 1992 specifically for the German market as a trainer. It was adapted for the US FAR 103 Ultralight Vehicles category for use as a two-seat trainer under the FAR 103 trainer exemption. It later became available as a US light-sport aircraft. The aircraft is available in Canada as an Advanced Ultralight Aeroplane. [4] [5]
The Skyboy wing is built from aluminum extrusions for the spars and wing ribs and covered with doped aircraft fabric. The wing's leading edge is Mylar covered in fabric, to increase stiffness. The wing is supported by "V" struts and utilizes jury struts. The fuselage is built upon an aluminum main tube that runs from the tail right to the rudder pedals. The wings and horizontal tail surfaces can be folded for trailering or storage. The cabin is constructed from two fibreglass shells, joined together. The rear of the cabin is covered in aircraft fabric. The optional cabin doors open upwards. [2] [3]
Controls are conventional three-axis. The control stick is a centrally mounted "Y" stick, between the two seats that can be used from either seat. [3]
The Skyboy has a distinctive main landing gear, consisting of a trailing idler link, with suspension consisting of a coil spring mounted over a shock absorber. The company describes the main landing gear: "one of the best landing gears in the market (makes bad landings look good)". [3] [4]
The available engines include the 64 hp (48 kW) Rotax 582, 80 hp (60 kW) Rotax 912, 100 hp (75 kW) Rotax 912S and the 85 hp (63 kW) Jabiru 2200. The 50 hp (37 kW) Rotax 503 was available at the beginning of production, but did not provide adequate performance. [6]
The Skyboy has never been available as a kit aircraft, but only as a factory-complete, ready-to-fly product. Labour wage levels in the Czech Republic have meant that its price has been generally similar to buying unassembled kits for North American buyers. In 2008 the completed Skyboy base model sold for about US$60,000. [3] [4]
Aside from its flight training and recreational aircraft roles, the Skyboy has been employed in South Africa for surveillance duties, in Australia for professional aerial photography and in Mexico for tourist sightseeing flights. [4]
Data from Purdy, Cliche & InterPlane [2] [3] [6]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.
The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.
The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.
The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.
The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.
The Capella XS is a family of American high wing, tractor configuration, cabin aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.
The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.
The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The Light Miniature Aircraft LM-5 series is a family of American high-wing, conventional landing gear, strut-braced, single-engine ultralight aircraft that are intended to resemble the Piper PA-18 Super Cub. The designs are all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.
The Precision Tech Fergy F-II B is a two-seat side-by-side, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.
The Buzzman L'il Buzzard is a Canadian, two seat side-by-side configuration, high wing, strut-braced, conventional landing gear, tractor configuration, ultralight aircraft, originally manufactured by Buzzman ARVS and later by L'il Hustler Ultralight Aviation of Holland Landing, Ontario. The aircraft is sold mostly assembled, less only paint, engine and instruments.
The Air Creation GT and Clipper are a series of French two-seat flying wing ultralight trikes that was designed and produced by Air Creation.
The Cosmos Phase II and Phase III are a series of French two-seat flying wing ultralight trikes that were produced by Cosmos ULM of Fontaine-lès-Dijon and now by Cosmos Ultralight of Puente de Ixtla, Mexico. The aircraft are supplied as factory completed aircraft and are not available as kits.
The Buckeye Dream Machine is an American powered parachute that was designed and produced by Buckeye Industries, introduced in 1985. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft, as a kit, in the form of plans for amateur construction.
The Synairgie Jet Ranger is a French homebuilt ultralight aircraft that was designed and produced by Synairgie of Montauban, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
