International Transtar

Last updated
International TranStar
2008-07-24 International truck docked at Duke Hospital South 2.jpg
Overview
Manufacturer Navistar International
Production2002-2017
Body and chassis
Class Class 6, 7 & 8, tractor unit
Chronology
Successor RH Series

The International TranStar (originally the International 8000 Series) is a range of Class 8 trucks produced by Navistar International for North America. Produced nearly exclusively as a semitractor, the product range is focused towards local delivery and regional shipping.

Contents

Introduced in 2002, the 8000 Series replaced a product line of the same name derived from the long-running International Harvester S-Series. In 2007, Navistar rebranded the 8000 Series as the International TranStar. The name is derived from International Harvester Transtar, used for various Class 8 conventional and cabover highway tractors from the 1960s to the 1980s.

Historical models (International Harvester)

An International Harvester CO-4000 IH CO-4000, Mayflower trailer.jpg
An International Harvester CO-4000
1974-81 Transtar II International TranStar II COE.jpg
1974-81 Transtar II

Cabover

During the 1960s the DCOF-405 or "Emeryville" was the top seller among American trucks for four years. [1]

In 1965, International Harvester introduced the CO-4000, replacing the DCO-400. Featuring a larger and wider cab, the CO-4000 was distinguished by a large trapezoidal grille, a design feature that would be used on International cabovers into the late 1990s. For 1968, the CO-4000 was given an update, with the standard engine becoming the turbocharged IHC DVT573 diesel V8 with optional diesel Cummins and Detroit Diesel engines. Internally known as the CO/COF-4070A and as COF-4090A (with a raised cab), the new truck was marketed as the Transtar.

For 1970, two new models were introduced. A Super Transtar featured a Detroit Diesel 12V71 V12 engine, allowing for loads of up to 144,000 lbs. The all-wheel drive Unistar was introduced; the truck was fitted with a freewheeling front axle, powered when the drive system detected loss of traction from the rear wheels; the Unistar was sold through 1972.

During 1974, the Transtar cabover underwent a second upgrade, becoming the Transtar II (CO/COF-4070B). [2] Visually, few changes were made between the two vehicles, although a Transtar II is distinguished by windshield wipers mounted from the top of the cab. Under the cab, to accommodate trends towards larger-displacement engines, International modified the engine lineup. International offered its own V800 turbocharged diesel V8 (replacing the DVT573), with Detroit Diesel introducing the 8V92 V8 (in place of the 12V71), the Caterpillar 3406 six, and several Cummins engines, including the 1150cid KT-450 six (among the largest engines ever fitted to a roadgoing vehicle).

In 1981, the Transtar II CO 4070 was discontinued, replaced by the CO-9670, the first of the Newport Series cabovers. Sharing little more than the trapezoidal grille with the Transtar, the 9670 (also branded as the XL-Series) shared its doors with the Transtar 4300 conventional. In a significant break from precedent, the interior of the 9670 and its successors were designed without any intrusion of the engine or transmission (leaving a flat floor). The final Newport-series cabover sold in North America was assembled in 1998.

Conventional

1970s Paystar 5000 towing a trailer bus. HGG-Sattelomnibus-April1985.jpg
1970s Paystar 5000 towing a trailer bus.

In 1969, International Harvester introduced the Transtar 400 conventional. An update of the D-400 introduced in 1961, the Transtar 400 was a long-hood conventional fitted with the cab of the DCO-400 ("Emeryville") cabover.

In 1971, International Harvester replaced the Transtar 400 with the Transtar 4270 (short-hood) and 4370 (long-hood) conventionals. A completely new design with a much larger cab, the Transtar cab would be shared with the all-new Paystar introduced in 1973.

In 1985, the Transtar 4370 saw a major update and a renaming. Dropping the Transtar name, it became the International 9370, an introductory model of the International 9000 series. In 2000, the cab saw a major redesign for the first time since its 1971 introduction.

Design overview

International TranStar 8600 with a special single-seat body for carrying long pipes International TranStar 8600 pipe carrier 6x4.jpg
International TranStar 8600 with a special single-seat body for carrying long pipes

Although using a wide variety of chassis frames for each vehicle, the 8000/TranStar is produced with the same cab as the International DuraStar (with which it shares a larger version of its grille), the ProStar, WorkStar, LoneStar, and the discontinued TerraStar and XT truck lines. As it is designed as a regional vehicle, the exterior of the TranStar did not include the fuel-efficiency enhancements integrated into the long-haul ProStar.

Models

8500

The 8500 model has a wheelbase from 128 to 201 in (3.3 to 5.1 m), is powered by an International HT 570. Its front axle capacity is 10,000 lb (4,500 kg) or 12,000 lb (5,400 kg). Rear single axle has a capacity of 23,000 pounds (10,000 kg). Rear tandem axle has a capacity of 40,000 lb (18,000 kg). Both axles are either Meritor or Dana Spicer and are available with a driver-controlled locking differential. Applications include beverage, city tractor, and regional haul. [3]

8600

The heavier-duty 8600 model has a wheelbase from 128 to 315 inches (3.25 to 8.00 m), is powered by either a Caterpillar or Cummins diesel. Its front axle is either a Meritor with a capacity of 10,000 lb (4,500 kg), 12,000 lb (5,400 kg), or 13,200 lb (6,000 kg) or a Dana Spicer with a capacity of 10,000 lb (4,500 kg), 12,000 lb (5,400 kg), 13,200 lb (6,000 kg), or 14,000 lb (6,400 kg). Rear single axle capacity is 23,000 lb (10,000 kg). Rear tandem axle capacity is 40,000 lb (18,000 kg). Both axles are either Meritor or Dana Spicer and are available with a driver-controlled locking differential. Applications include beverage, city tractor, liquid or dry bulk, and regional haul. [3]

Engines and transmissions

8500

8600

Note: References for this section are the same as for Variants

Related Research Articles

<span class="mw-page-title-main">International Harvester</span> American manufacturing company

The International Harvester Company was an American manufacturer of agricultural and construction equipment, automobiles, commercial trucks, lawn and garden products, household equipment, and more. It was formed from the 1902 merger of McCormick Harvesting Machine Company and Deering Harvester Company and three smaller manufacturers: Milwaukee; Plano; and Warder, Bushnell, and Glessner. Its brands included McCormick, Deering, and later McCormick-Deering, as well as International. Along with the Farmall and Cub Cadet tractors, International was also known for the Scout and Travelall vehicle nameplates. In the 1980s all divisions were sold off except for International Trucks, which changed its parent company name to Navistar International.

<span class="mw-page-title-main">Caterpillar 797</span> Off-highway ultra class haul truck for mining and heavy-duty construction

The Caterpillar 797 is a series of off-highway, ultra class, two-axle, mechanical powertrain haul trucks developed and manufactured in the United States by Caterpillar Inc. specifically for high-production mining and heavy construction applications worldwide. In production since 1998, the 797 series represents Caterpillar’s largest, highest capacity haul trucks. The current, third-generation model, the 797F, offers one of the largest haul truck payload capacities in the world, up to 400 short tons (363 t) and has the highest payload capacity among mechanical drive haul trucks.

<span class="mw-page-title-main">Mack F series</span> Motor vehicle

The Mack F series was the third generation of cabover trucks from Mack Trucks. Its production began in 1962 and ended in 1981. It was produced primarily as a set-forward axle truck but a setback axle version was shipped overseas. The cab came in a 50-inch (1371.6 mm) day cab. Sleeper models included a 72-inch (1828.8 mm), 80 inch (2032 mm) and later a "bustle back" was added that lengthened the sleeper to 86 inches (2184.4 mm).

<span class="mw-page-title-main">GMC General</span> Motor vehicle

The GMC General is a heavy-duty truck that was assembled by the GMC Truck and Coach Division of General Motors from 1977 to 1987. The largest conventional-cab truck ever produced by the company, the product line replaced the C/M 90/9500 trucks.

<span class="mw-page-title-main">GMC Brigadier</span> Motor vehicle

The GMC Brigadier is a series of heavy-duty trucks that were assembled by the GMC Truck and Coach Division of General Motors. The second generation of the H/J-series heavy-duty conventionals, the Brigadier was produced from 1978 to late 1989, as a WhiteGMC for the last year and a half. Slotted between the largest medium-duty C/K trucks and the GMC General, the Brigadier was a Class 7-8 short-hood conventional similar to the Ford L-Series and Mack Model R. Configured in both straight truck and semi-tractor layouts, the Brigadier saw use in short-haul, vocational, and severe-service applications.

<span class="mw-page-title-main">GMC Astro</span> Motor vehicle

The GMC Astro is a heavy-duty cabover truck that was manufactured by the GMC Truck and Coach Division of General Motors from the 1969 to 1987 model years. Succeeding the F/D-series "Crackerbox" cabovers, the Astro was marketed by Chevrolet as the Titan, serving as the largest cabover truck ever produced by General Motors.

<span class="mw-page-title-main">Ford L series</span> Motor vehicle

The Ford L-series is a range of commercial trucks that were assembled and marketed by Ford between 1970 and 1998. The first dedicated Class 8 conventional truck developed by the company, the L-Series was colloquially named the "Louisville Line", denoting the Kentucky Truck Plant that assembled the trucks. The successor to the Ford N-series and the Ford F-900/1000 Super Duty, the line was a Class 6-8 truck. Slotted above the medium-duty F-Series, the L-Series was produced over a wide variety of applications through its production life, including both straight trucks and semitractors.

<span class="mw-page-title-main">International Loadstar</span> Motor vehicle

The International Loadstar is a series of trucks that were produced by International Harvester from 1962 to 1978. The first product line of the company developed specifically as a medium-duty truck, the Loadstar was slotted between C-Line pickup trucks and the heavy-duty R-series. Following the discontinuation of the R-series, the Loadstar was slotted below the Fleetstar and Transtar conventionals.

<span class="mw-page-title-main">International S series</span> Motor vehicle

The International S series is a range of trucks that was manufactured by International Harvester from 1977 to 2001. Introduced to consolidate the medium-duty IHC Loadstar and heavy-duty IHC Fleetstar into a single product range, the S series was slotted below the Transtar and Paystar Class 8 conventionals.

<span class="mw-page-title-main">International Paystar</span> Motor vehicle

The International Paystar is a series of trucks that was manufactured by International Harvester and its successor, Navistar International. Produced from 1973 to 2017 across three generations, the Paystar replaced the long-running 210/230 and M-series. Developed for both on and off-road use, the Paystar was the largest commercially-marketed product range sold by International, intended for vocational applications. For 2017, the Paystar underwent a substantial redesign, becoming the International HX series.

<span class="mw-page-title-main">International 9000 (COE)</span> Motor vehicle

The COE version of the International 9000 is a series of cabover trucks that were produced by International Harvester and its corporate successor Navistar. Introduced in 1981 as the replacement for the Transtar II COE, two generations of the model line were produced in North America until 1998. Subsequent production continued into the 21st century for worldwide markets, where more restrictive length laws continue to favor the use of this configuration.

<span class="mw-page-title-main">International 9000</span> Motor vehicle

The International 9000 Series is a range of trucks that was manufactured by Navistar International from 1971 to 2017. A conventional-cab truck, the model range was configured primarily for highway applications. In terms of size, the model range was slotted between the medium-duty Loadstar and severe-service Paystar series.

<span class="mw-page-title-main">International Fleetstar</span> Motor vehicle

The International Fleetstar is a series of heavy-duty trucks that was produced between 1962 and 1977 by International Harvester. Slotted above the Loadstar and below the Paystar and Transtar conventionals introduced after it, the Fleetstar was the first truck line that International designed specifically for vocational use.

<span class="mw-page-title-main">Dodge LCF series</span> Motor vehicle

The Dodge LCF was a series of medium- and heavy-duty trucks built by Dodge from 1960 until 1976. They replaced the Dodge COE range of cabover trucks built in the 1950s. The 500 through 700 series were medium duty only, while 800 through 1000 series were reserved for heavy-duty versions.

<span class="mw-page-title-main">M915 (truck)</span> Tractor unit used for line haul missions by the US Army

The M915 is a tractor unit used for line-haul missions by the United States Army. Designed for use on improved roads, it does not have a driven front axle.

<span class="mw-page-title-main">Mack MC/MR series</span> Motor vehicle

The Mack MC/MR series, also known as the "Cruise-Hauler", is a cabover truck first introduced in 1978. It is of a distinct "set back front axle" design, with the driver compartment mounted ahead of the front axle and with a large, flat, divided windscreen covering almost half of the truck's frontal aspect.

<span class="mw-page-title-main">Mack Granite</span> Heavy-duty truck series

The Mack Granite is a series of heavy duty and severe service trucks built by Mack Trucks. It has a long, low-profile hood and a high-visibility cab. Designed as straight trucks for local construction, waste removal, and other vocational jobs, it is also available as a semi-tractor. Introduced in 2001, it remains in production as of today.

<span class="mw-page-title-main">Mack TerraPro</span>

The Mack TerraPro is a series of heavy duty and severe service trucks built by Mack Trucks. They are a forward control cab-over-engine type, where the driver sits in front of the axle. A flat front has two large windshields. A spotting feature is small notches in the lower inside of the windshields. It is used in refuse service and for construction concrete pumps.

<span class="mw-page-title-main">Mack Anthem</span> Trucks designed for highway use

The Mack Anthem is a series of heavy duty trucks built by Mack Trucks. It has a long low-drag hood and fenders. Introduced in 2018, it is designed primarily for highway use.

References

  1. Mall, Scott (2019-06-21). "Flashback Friday: profiling International Harvester's rich history in trucks". FreightWaves. Archived from the original on 2020-08-01. Retrieved 2019-06-27.
  2. "International Transtar Photo Lineage from Doug McKenzie" . Retrieved 2011-12-29.
  3. 1 2 "International Truck and Engine Corporation". Archived from the original on 2008-10-07. Retrieved 2013-05-03. International Trucks website- 8500
  4. "C13 ACERT". Archived from the original on 2007-08-06. Retrieved 2007-10-03.
  5. Cummins ISM