Inverse gas chromatography

Last updated
Analytical Gas Chromatography A.gif
Inverse and analytical gas chromatography B.GIF
Analytical gas chromatography A (top) compared with inverse gas chromatography B (bottom). While in gas chromatography a sample containing multiple species is separated into its components on a stationary phase, Inverse gas chromatography uses injection of a single species to probe the characteristics of a stationary phase sample.

Inverse gas chromatography is a physical characterization analytical technique that is used in the analysis of the surfaces of solids. [1]

Contents

Inverse gas chromatography or IGC is a highly sensitive and versatile gas phase technique developed over 40 years ago to study the surface and bulk properties of particulate and fibrous materials. In IGC the roles of the stationary (solid) and mobile (gas or vapor) phases are inverted from traditional analytical gas chromatography (GC); IGC is considered a materials characterization technique (of the solid) rather than an analytical technique (of a gas mixture). In GC, a standard column is used to separate and characterize a mixture of several gases or vapors. In IGC, a single standard gas or vapor (probe molecule) is injected into a column packed with the solid sample under investigation.

During an IGC experiment a pulse or constant concentration of a known gas or vapor (probe molecule) is injected down the column at a fixed carrier gas flow rate. The retention time of the probe molecule is then measured by traditional GC detectors (i.e. flame ionization detector or thermal conductivity detector). Measuring how the retention time changes as a function of probe molecule chemistry, probe molecule size, probe molecule concentration, column temperature, or carrier gas flow rate can elucidate a wide range of physico-chemical properties of the solid under investigation. Several in depth reviews of IGC have been published previously. [2] [3]

IGC experiments are typically carried out at "infinite dilution", where only small amounts of probe molecule are injected. This region is also called Henry's law region or linear region of the sorption isotherm. At infinite dilution probe-probe interactions are assumed negligible and any retention is only due to probe-solid interactions. The resulting retention volume, VRo, is given by the following equation:

where j is the James–Martin pressure drop correction, m is the sample mass, F is the carrier gas flow rate at standard temperature and pressure, tR is the gross retention time for the injected probe, to is the retention time for a non-interaction probe (i.e. dead-time), and T is the absolute temperature.

Surface energy determination

The main application of IGC is to measure the surface energy of solids (fibers, particulates, and films). Surface energy is defined as the amount of energy required to create a unit area of a solid surface; analogous to surface tension of a liquid. Also, the surface energy can be defined as the excess energy at the surface of a material compared to the bulk. The surface energy (γ) is directly related to the thermodynamic work of adhesion (Wadh) between two materials as given by the following equation:

where 1 and 2 represent the two components in the composite or blend. When determining if two materials will adhere it is common to compare the work of adhesion with the work of cohesion, Wcoh = 2γ. If the work of adhesion is greater than the work of cohesion, then the two materials are thermodynamically favored to adhere.

Surface energies are commonly measured by contact angle methods. However, these methods are ideally designed for flat, uniform surfaces. For contact angle measurements on powders, they are typically compressed or adhered to a substrate which can effectively change the surface characteristics of the powder. Alternatively, the Washburn method can be used, but this has been shown to be affected by column packing, particle size, and pore geometry. [4] IGC is a gas phase technique, thus is not subject to the above limitations of the liquid phase techniques.

To measure the solid surface energy by IGC a series of injections using different probe molecules is performed at defined column conditions. It is possible to ascertain both the dispersive component of the surface energy and acid-base properties via IGC. For the dispersive surface energy, the retention volumes for a series of n-alkane vapors (i.e. decane, nonane, octane, heptanes, etc.) are measured. The Dorris and Gray. [5] or Schultz [6] methods can then be used to calculate the dispersive surface energy. Retention volumes for polar probes (i.e. toluene, ethyl acetate, acetone, ethanol, acetonitrile, chloroform, dichloromethane, etc.) can then be used to determine the acid-base characteristics of the solid using either the Gutmann, [7] or Good-van Oss theory. [8]

Other parameters accessible by IGC include: heats of sorption [1], adsorption isotherms, [9] energetic heterogeneity profiles, [10] [11] diffusion coefficients, [12] glass transition temperatures [1], [13] Hildebrand [14] [15] and Hansen [16] solubility parameters, and crosslink densities. [17]

Applications

IGC experiments have applications over a wide range of industries. Both surface and bulk properties obtained from IGC can yield vital information for materials ranging from pharmaceuticals to carbon nanotubes. Although surface energy experiments are most common, there are a wide range of experimental parameters that can be controlled in IGC, thus allowing the determination of a variety of sample parameters. The below sections highlight how IGC experiments are utilized in several industries.

Polymers and coatings

IGC has been used extensively for the characterization of polymer films, beads, and powders. For instance, IGC was used to study surface properties and interactions amongst components in paint formulations. [18] Also, IGC has been used to investigate the degree of crosslinking for ethylene propylene rubber using the Flory–Rehner equation [17]. Additionally, IGC is a sensitive technique for the detection and determination of first and second order phase transitions like melting and glass transition temperatures of polymers. [19] Although other techniques like differential scanning calorimetry are capable of measuring these transition temperatures, IGC has the capability of glass transition temperatures as a function of relative humidity. [20]

Pharmaceuticals

The increasing sophistication of pharmaceutical materials has necessitated the use for more sensitive, thermodynamic based techniques for materials characterization. For these reasons, IGC, has seen increased use throughout the pharmaceutical industry. Applications include polymorph characterization, [21] effect of processing steps like milling, [22] and drug-carrier interactions for dry powder formulations. [23] In other studies, IGC was used to relate surface energy and acid-base values with triboelectric charging [24] and differentiate the crystalline and amorphous phases [23].

Fibers

Surface energy values obtained by IGC have been used extensively on fibrous materials including textiles, [25] natural fibers, [26] glass fibers, [27] and carbon fibers. [28] Most of these and other related studies investigating the surface energy of fibers are focusing on the use of these fibers in composites. Ultimately, the changes in surface energy can be related to composite performance via the works of adhesion and cohesion discussed previously.

Nanomaterials

Similar to fibers, nanomaterials like carbon nanotubes, nanoclays, and nanosilicas are being used as composite reinforcement agents. Therefore, the surface energy and surface treatment of these materials has been actively studied by IGC. For instance, IGC has been used to study the surface activity of nanosilica, nanohematite, and nanogeoethite. [29] Further, IGC was used to characterize the surface of as received and modified carbon nanotubes. [30]

Metakaolins

IGC was used to characterize the adsorption surface properties of calcined kaolin (metakaolin) and the grinding effect on this material. [31]

Other

Other applications for IGC include paper-toner adhesion, [32] wood composites, [33] porous materials [3], and food materials. [34]

See also

Related Research Articles

<span class="mw-page-title-main">Colloid</span> Mixture of an insoluble substance microscopically dispersed throughout another substance

A colloid is a mixture in which one substance consisting of microscopically dispersed insoluble particles is suspended throughout another substance. Some definitions specify that the particles must be dispersed in a liquid, while others extend the definition to include substances like aerosols and gels. The term colloidal suspension refers unambiguously to the overall mixture. A colloid has a dispersed phase and a continuous phase. The dispersed phase particles have a diameter of approximately 1 nanometre to 1 micrometre.

In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. The mixture is dissolved in a fluid solvent called the mobile phase, which carries it through a system on which a material called the stationary phase is fixed. Because the different constituents of the mixture tend to have different affinities for the stationary phase and are retained for different lengths of time depending on their interactions with its surface sites, the constituents travel at different apparent velocities in the mobile fluid, causing them to separate. The separation is based on the differential partitioning between the mobile and the stationary phases. Subtle differences in a compound's partition coefficient result in differential retention on the stationary phase and thus affect the separation.

<span class="mw-page-title-main">Irving Langmuir</span> American chemist and physicist (1881–1957)

Irving Langmuir was an American chemist, physicist, and engineer. He was awarded the Nobel Prize in Chemistry in 1932 for his work in surface chemistry.

<span class="mw-page-title-main">Surface science</span> Study of physical and chemical phenomena that occur at the interface of two phases

Surface science is the study of physical and chemical phenomena that occur at the interface of two phases, including solid–liquid interfaces, solid–gas interfaces, solid–vacuum interfaces, and liquid–gas interfaces. It includes the fields of surface chemistry and surface physics. Some related practical applications are classed as surface engineering. The science encompasses concepts such as heterogeneous catalysis, semiconductor device fabrication, fuel cells, self-assembled monolayers, and adhesives. Surface science is closely related to interface and colloid science. Interfacial chemistry and physics are common subjects for both. The methods are different. In addition, interface and colloid science studies macroscopic phenomena that occur in heterogeneous systems due to peculiarities of interfaces.

<span class="mw-page-title-main">High-performance liquid chromatography</span> Technique in analytical chemistry

High-performance liquid chromatography (HPLC), formerly referred to as high-pressure liquid chromatography, is a technique in analytical chemistry used to separate, identify, and quantify specific components in mixtures. The mixtures can originate from food, chemicals, pharmaceuticals, biological, environmental and agriculture, etc, which have been dissolved into liquid solutions.

<span class="mw-page-title-main">Adsorption</span> Phenomenon of surface adhesion

Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. This process creates a film of the adsorbate on the surface of the adsorbent. This process differs from absorption, in which a fluid is dissolved by or permeates a liquid or solid. While adsorption does often precede absorption, which involves the transfer of the absorbate into the volume of the absorbent material, alternatively, adsorption is distinctly a surface phenomenon, wherein the adsorbate does not penetrate through the material surface and into the bulk of the adsorbent. The term sorption encompasses both adsorption and absorption, and desorption is the reverse of sorption.

<span class="mw-page-title-main">Electron ionization</span> Ionization technique

Electron ionization is an ionization method in which energetic electrons interact with solid or gas phase atoms or molecules to produce ions. EI was one of the first ionization techniques developed for mass spectrometry. However, this method is still a popular ionization technique. This technique is considered a hard ionization method, since it uses highly energetic electrons to produce ions. This leads to extensive fragmentation, which can be helpful for structure determination of unknown compounds. EI is the most useful for organic compounds which have a molecular weight below 600. Also, several other thermally stable and volatile compounds in solid, liquid and gas states can be detected with the use of this technique when coupled with various separation methods.

In materials science, the sol–gel process is a method for producing solid materials from small molecules. The method is used for the fabrication of metal oxides, especially the oxides of silicon (Si) and titanium (Ti). The process involves conversion of monomers into a colloidal solution (sol) that acts as the precursor for an integrated network of either discrete particles or network polymers. Typical precursors are metal alkoxides. Sol–gel process is used to produce ceramic nanoparticles.

<span class="mw-page-title-main">Self-assembled monolayer</span>

Self-assembled monolayers (SAM) of organic molecules are molecular assemblies formed spontaneously on surfaces by adsorption and are organized into more or less large ordered domains. In some cases molecules that form the monolayer do not interact strongly with the substrate. This is the case for instance of the two-dimensional supramolecular networks of e.g. perylenetetracarboxylic dianhydride (PTCDA) on gold or of e.g. porphyrins on highly oriented pyrolitic graphite (HOPG). In other cases the molecules possess a head group that has a strong affinity to the substrate and anchors the molecule to it. Such a SAM consisting of a head group, tail and functional end group is depicted in Figure 1. Common head groups include thiols, silanes, phosphonates, etc.

<span class="mw-page-title-main">Contact angle</span> The angle between a liquid–vapor interface and a solid surface

The contact angle is the angle between a liquid surface and a solid surface where they meet. More specifically, it is the angle between the surface tangent on the liquid–vapor interface and the tangent on the solid–liquid interface at their intersection. It quantifies the wettability of a solid surface by a liquid via the Young equation.

<span class="mw-page-title-main">Surface plasmon resonance</span> Physical phenomenon of electron resonance

Surface plasmon resonance (SPR) is a phenomenon that occurs where electrons in a thin metal sheet become excited by light that is directed to the sheet with a particular angle of incidence, and then travel parallel to the sheet. Assuming a constant light source wavelength and that the metal sheet is thin, the angle of incidence that triggers SPR is related to the refractive index of the material and even a small change in the refractive index will cause SPR to not be observed. This makes SPR a possible technique for detecting particular substances (analytes) and SPR biosensors have been developed to detect various important biomarkers.

Brunauer–Emmett–Teller (BET) theory aims to explain the physical adsorption of gas molecules on a solid surface and serves as the basis for an important analysis technique for the measurement of the specific surface area of materials. The observations are very often referred to as physical adsorption or physisorption. In 1938, Stephen Brunauer, Paul Hugh Emmett, and Edward Teller presented their theory in the Journal of the American Chemical Society. BET theory applies to systems of multilayer adsorption that usually utilizes a probing gas (called the adsorbate) that does not react chemically with the adsorptive (the material upon which the gas attaches to) to quantify specific surface area. Nitrogen is the most commonly employed gaseous adsorbate for probing surface(s). For this reason, standard BET analysis is most often conducted at the boiling temperature of N2 (77 K). Other probing adsorbates are also utilized, albeit less often, allowing the measurement of surface area at different temperatures and measurement scales. These include argon, carbon dioxide, and water. Specific surface area is a scale-dependent property, with no single true value of specific surface area definable, and thus quantities of specific surface area determined through BET theory may depend on the adsorbate molecule utilized and its adsorption cross section.

<span class="mw-page-title-main">Langmuir–Blodgett film</span> Thin film obtained by depositing multiple monolayers onto a surface

A Langmuir–Blodgett (LB) film is a nanostructured system formed when Langmuir films—or Langmuir monolayers (LM)—are transferred from the liquid-gas interface to solid supports during the vertical passage of the support through the monolayers. LB films can contain one or more monolayers of an organic material, deposited from the surface of a liquid onto a solid by immersing the solid substrate into the liquid. A monolayer is adsorbed homogeneously with each immersion or emersion step, thus films with very accurate thickness can be formed. This thickness is accurate because the thickness of each monolayer is known and can therefore be added to find the total thickness of a Langmuir–Blodgett film.

<span class="mw-page-title-main">Specific surface area</span> Total surface of a finely divided solid per unit of mass

Specific surface area (SSA) is a property of solids defined as the total surface area (SA) of a material per unit mass,. Alternatively, it may be defined as SA per solid or bulk volume.

Small-angle X-ray scattering (SAXS) is a small-angle scattering technique by which nanoscale density differences in a sample can be quantified. This means that it can determine nanoparticle size distributions, resolve the size and shape of (monodisperse) macromolecules, determine pore sizes, characteristic distances of partially ordered materials, and much more. This is achieved by analyzing the elastic scattering behaviour of X-rays when travelling through the material, recording their scattering at small angles. It belongs to the family of small-angle scattering (SAS) techniques along with small-angle neutron scattering, and is typically done using hard X-rays with a wavelength of 0.07 – 0.2 nm. Depending on the angular range in which a clear scattering signal can be recorded, SAXS is capable of delivering structural information of dimensions between 1 and 100 nm, and of repeat distances in partially ordered systems of up to 150 nm. USAXS can resolve even larger dimensions, as the smaller the recorded angle, the larger the object dimensions that are probed.

<span class="mw-page-title-main">Janus particles</span> Type of nanoparticle or microparticle

Janus particles are special types of nanoparticles or microparticles whose surfaces have two or more distinct physical properties. This unique surface of Janus particles allows two different types of chemistry to occur on the same particle. The simplest case of a Janus particle is achieved by dividing the particle into two distinct parts, each of them either made of a different material, or bearing different functional groups. For example, a Janus particle may have one half of its surface composed of hydrophilic groups and the other half hydrophobic groups, the particles might have two surfaces of different color, fluorescence, or magnetic properties. This gives these particles unique properties related to their asymmetric structure and/or functionalization.

<span class="mw-page-title-main">Field flow fractionation</span> Separation technique to characterize the size of colloidal particles

Field-flow fractionation, abbreviated FFF, is a separation technique invented by J. Calvin Giddings. The technique is based on separation of colloidal or high molecular weight substances in liquid solutions, flowing through the separation platform, which does not have a stationary phase. It is similar to liquid chromatography, as it works on dilute solutions or suspensions of the solute, carried by a flowing eluent. Separation is achieved by applying a field or cross-flow, perpendicular to the direction of transport of the sample, which is pumped through a long and narrow laminar channel. The field exerts a force on the sample components, concentrating them towards one of the channel walls, which is called accumulation wall. The force interacts with a property of the sample, thereby the separation occurs, in other words, the components show differing "mobilities" under the force exerted by the crossing field. As an example, for the hydraulic, or cross-flow FFF method, the property driving separation is the translational diffusion coefficient or the hydrodynamic size. For a thermal field, it is the ratio of the thermal and the translational diffusion coefficient.

Adsorption is the adhesion of ions or molecules onto the surface of another phase. Adsorption may occur via physisorption and chemisorption. Ions and molecules can adsorb to many types of surfaces including polymer surfaces. A polymer is a large molecule composed of repeating subunits bound together by covalent bonds. In dilute solution, polymers form globule structures. When a polymer adsorbs to a surface that it interacts favorably with, the globule is essentially squashed, and the polymer has a pancake structure.

Membrane technology encompasses the scientific processes used in the construction and application of membranes. Membranes are used to facilitate the transport or rejection of substances between mediums, and the mechanical separation of gas and liquid streams. In the simplest case, filtration is achieved when the pores of the membrane are smaller than the diameter of the undesired substance, such as a harmful microorganism. Membrane technology is commonly used in industries such as water treatment, chemical and metal processing, pharmaceuticals, biotechnology, the food industry, as well as the removal of environmental pollutants.

<span class="mw-page-title-main">Nidal Hilal</span>

Nidal Hilal DSc PhD EurIng CEng FIChemE FLSW FRSC is an academic, engineering scientist and scientific adviser. He is a Global Network Professor at New York University, the Founding Director and Principal Investigator of NYUAD Water Research Center. He held professorships at the University of Nottingham and Swansea University in the United Kingdom. He is an Emeritus Professor of Engineering at Swansea University and the Founding Director of the Centre for Water Advanced Technologies and Environmental Research (CWATER).

References

  1. ↑ Mohammadi-Jam, S.; Waters, K.E. (2014). "Inverse gas chromatography applications: A review". Advances in Colloid and Interface Science. 212: 21–44. doi:10.1016/j.cis.2014.07.002. ISSN   0001-8686.
  2. ↑ J. Condor and C. Young, Physicochemical measurement by gas chromatography, John Wiley and Sons, Chichester, UK (1979)
  3. ↑ F. Thielmann, Journal of Chromatography A. 1037 (2004) 115.
  4. ↑ J. Dove, G. Buckton, and C. Doherty, International Journal of Pharmaceutics. 138 (1996) 199–206.
  5. ↑ G.M. Doris and D.G. Gray, Journal of Colloids and Interfacial Science. 56 (1964) 353.
  6. ↑ J. Schultz, L. Lavielle, and C. Martin, Journal of Adhesion. 77 (1980) 353–362.
  7. ↑ V. Gutmann, Coordination Chemistry Reviews. 2 (1966) 239–256.
  8. ↑ C.J. van Oss, R.J. Good, and M.K. Chaudhury, Langmuir. 4 (1988) 884–891.
  9. ↑ E. Cremer and H. Huber, in Gas Chromatography., ed. N. Brenner, et al., Academic Press, New York (1962) p 169.
  10. ↑ P.P. Yla-Maihaniemi, J.Y.Y. Heng, F. Thielmann, and D.R. Williams, Langmuir. 24 (2008) 9551–9557.
  11. ↑ F. Thielmann, D.J. Burnett, and J.Y.Y. Heng, Drug Development and Industrial Pharmacy. 33 (2007) 1240–1253.
  12. ↑ J. van Deemter, F.J. Zuiderweg, and A. Klinkenberg, Chemical Engineering Science. 5 (1965) 271.
  13. ↑ G. Buckton, A. Ambarkhane, and K. Pincott, Pharmaceutical Research. 21 (2004) 1554–1557.
  14. ↑ 14 D. Benczedi, D, I. Tomka, and F. Escher, Macromolecules. 31 (1998) 3055.
  15. ↑ G. DiPaola and J.E. Guillet, Macromolecules. 11 (1978) 228.
  16. ↑ K. Adamska and A. Voelkel, International Journal of Pharmaceutics. 304 (2005) 11–17.
  17. ↑ G.J. Price, K.S. Siow, and J.E. Guillet, Macromolecules. 22 (1989) 3116–3119.
  18. ↑ A. Ziani, R. Xu, H.P. Schreiber, and T. Kobayashi, Journal of Coatings Technology. 71 (1999) 53–60.
  19. ↑ A. Lavole and J.E. Guillet, Macromolecules. 2 (1969) 443.
  20. ↑ F. Thielmann and D.R. Williams, Deutsche Lebensmittel-Rundschau. 96 (2000) 255–257.
  21. ↑ H.H.Y. Tong, B.Y. Shekunov, P. York, and A.H.L Chow, Pharmaceutical Research. 19 (2002) 640–648.
  22. ↑ J.Y.Y. Heng, F. Thielmann, and D.R. Williams, Pharmaceutical Research, 23 (2006) 1918–1927.
  23. ↑ J. Feeley, P. York, B. Sumby, and H. Dicks, International Journal of Pharmaceutics. 172 (1998) 89–96.
  24. ↑ N. Ahfat, G. Buckton, R. Burrows, and M. Ticehurst, European Journal of Pharmaceutical Sciences. 9 (2000) 271–276.
  25. ↑ E. Cantergiani and D. Benczedi, Journal of Chromatography A. 969 (2002) 103–110.
  26. ↑ J.Y.Y. Heng, D.F. Pearse, F. Thielmann, T. Lampke, and A. Bismarck, Composite Interfaces. 14 (2007) 581–604.
  27. ↑ K. Tsutsumi and T. Ohsuga, Colloid and Polymer Science. 268 (1990) 38–44.
  28. ↑ L. Lavielle and J. Schultz, Langmuir. 7 (1991) 978–981.
  29. ↑ K. Batko and A. Voelkel, Journal of Colloid and Interface Science. 315 (2007) 768–771.
  30. ↑ R. Menzel, A. Lee, A. Bismarck, and M.S.P. Shaffer, Langmuir. (2009) in press.
  31. ↑ Gamelas, J.; Ferraz, E.; Rocha, F. (2014). "An insight into the surface properties of calcined kaolinitic clays: the grinding effect". Colloids and Surfaces A: Physicochemical and Engineering Aspects. 455: 49–57. doi:10.1016/j.colsurfa.2014.04.038.
  32. ↑ J. Borch, Journal of Adhesion Science and Technology. 5 (1991) 523–541.
  33. ↑ R.H. Mills, D.J. Gardner, and R. Wimmer. Journal of Applied Polymer Science. 110 (2008) 3880–3888.
  34. ↑ Q. Zhou and K.R. Cadwallader. Journal of Agricultural and Food Chemistry. 54 (2006) 1838–1843.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.