KAI-14

Last updated
KAI-14
RoleCompetition sailplane
National origin USSR
ManufacturerKazan Aviation Institute
Designer(lead) M.P. Simonov
First flightc.1962
Number built3

The KAI-14 was a Standard Class sailplane designed and built in the USSR in the 1960s. Two participated in the World Gliding Championships of 1965.

Contents

Design and development

The Standard Class (single seat, 15 m (49 ft 3 in) span) KAI-14 was an all-metal aircraft designed and built at the Kazan Aviation Institute by a team led by M.P. Simonov in the USSR in the early 1960s. It was a shoulder wing, cantilever monoplane. The leading edge had a forward sweep of 2° and its trailing edge was compound tapered. The wing terminated with small streamlined bodies known as salmons and was rigged with 4° of dihedral. Its inset hinged ailerons were each divided into two sections and small area airbrakes were mounted inboard. [1] A braking parachute was deployed when landing. [2]

The metal semi-monocoque fuselage had a forward section which contained the cockpit ahead of the wing leading edge but became markedly slimmer aft, in pod and boom style. [3] The KAI-14 had a 90° butterfly tail with straight tapered surfaces, squared tips and externally mass-balanced elevators. [4] It landed on a fixed monowheel, faired into the fuselage underside, which had a brake operated via the airbrake lever. The rear fuselage was protected by a tail bumper. [1]

The KAI-14's cockpit could be configured in two ways, either with the pilot reclining under a long, fuselage contour following, one piece canopy or sitting upright under a shorter, raised canopy. [4] The first arrangement gave lower drag, the second better vision; the latter is sometimes referred to as the "trainer canopy". [5]

Operational history

The first flight was made about 1962. It was first seen in the West when two examples were entered as Standard Class competitors at the World Gliding Championships of 1965, held at South Cerney in England. [4] Both were damaged in landing accidents and failed to fly the complete programme. Though one, no.79 piloted by Suslov, was repaired by the RAF and did return to the contest fitted with the trainer canopy in place of its earlier long canopy, [2] [6] they finished together at the bottom of the points table. [7]

A third KAI-14 was used in the USSR for spinning tests and to gather performance data. [5] Though sources suggest that serial production was intended, they do not record that happening. [3] [4]

Specifications

Data from Jane's World Sailplanes and Motor Gliders, p.196 [3]

General characteristics

Performance

Related Research Articles

Slingsby Eagle British two-seat glider, 1954

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.

Slingsby Prefect British single-seat glider, 1948

The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.

Slingsby Skylark 3 British single-seat glider, 1957

The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.

Slingsby Skylark 4 British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

EoN 460 British series of wooden sailplanes, 1960s

The EoN 460 series are wooden single-seat standard class sailplanes, built in the UK in the 1960s. It did not have major competition success but some remain in use in 2021.

The Stedman TS-1 City of Leeds was a parasol wing wooden sailplane, seating two in tandem open cockpits. Only one was built, by its designer in 1934; it remained active until the outbreak of World War II.

The Bréguet Br 900 Louisette was a short-span, single-seat competition sailplane built in France in the 1940s. It set some French gliding records but was unsuccessful at the international level. Only six production aircraft were built.

Cijan-Obad Orao

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

The Beatty-Johl BJ-2 Assegai was a single seat, high performance competition glider built in South Africa in the early 1960s. Only one was built; it was optimised for South African conditions and performed well there, winning two nationals and setting several records, but was less successful under European conditions at the 1965 World Gliding Championships.

The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.

SZD-42 Jantar 2

The SZD-42 Jantar 2 is a single seat Open Class competition glider, designed and produced in Poland in the 1970s. It features a span of over 20 m (66 ft) and elastic, camber changing flaps. It was placed second, third and seventh at the 1976 World Gliding Championships. Over one hundred were built and more than ninety remain registered.

Maeda 703

The Maeda 703 was one of the first indigenous Japanese gliders, a high performance single seat aircraft which first flew in 1940. Three were built, two with gull wing wings; one of these set a national endurance record in 1941.

The VTC Delfin is a competition single seat Standard class glider designed and built in Yugoslavia in the 1960s. It had some success in national competitions and went into small scale production.

DFS Rhönsperber German single seat competition glider, 1937

The DFS Rhönsperber, otherwise known as the Schweyer Rhönsperber or Jacobs Rhönsperber was a single seat competition glider designed in Germany by Hans Jacobs and first flown in 1935. For several years it was regarded as the best German sailplane and about one hundred were built.

Bruni 3V-1 Eolo

The Bruni 3V-1 Eolo was a single seat Italian competition glider, first flown in 1955. It took part World Gliding Championships of 1956 but retired early after sustaining damage.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

Zlin Z-25 Šohaj

The Zlín Šohaj series of club gliders began as a post World War II development of the DFS Olympia Meise. A large number were built in the 1940s and '50s.

Oberlerchner Mg 19

The Oberlerchner Mg 19 Steinadler is an Erwin Musger designed two seat tandem trainer glider built in Austria and first flown in 1951. Several examples of this successful aircraft, which competed in the two seat class at two World Gliding Championships in the 1950s, were still flying in 2000.

MRSz A-08 Sirály

The MRSz A-08 Sirály (Seagull) was a Hungarian high performance glider designed to compete in the 1956 and 1958 World Gliding Championships. It was unsuccessful at this level but set a notable number of national records.

References

  1. 1 2 Taylor, John W R (1962). Jane's All the World's Aircraft 1962-63. London: Sampson Low, Marston & Co. Ltd. p. 343.
  2. 1 2 "World Gliding Championships". Flight . Vol. 87, no. 2935. 10 June 1965. p. 903.
  3. 1 2 3 Coates, Andrew (1980). Jane's World Sailplanes and Motor Gliders. London: Jane's Publishing Company. p. 196. ISBN   0 7106 0017 8.
  4. 1 2 3 4 Hardy, Michael (1982). Gliders & Sailplanes of the World. London: Ian Allan Ltd. p. 61. ISBN   0 7110 1152 4.
  5. 1 2 3 4 "Kazan KAI-14" . Retrieved 6 January 2014.
  6. ↑ "World Gliding Championships". Flight . Vol. 87, no. 2937. 24 June 1965. p. 1028.
  7. ↑ "World Gliding Championships". Sailplane and Gliding. XVI (323): 581. August–September 1965.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.