Richard D. James is a mechanician and materials scientist. He is currently the Russell J. Penrose Professor and Distinguished McKnight University Professor at the Department of Aerospace Engineering and Mechanics at the University of Minnesota. He was educated at Brown University and received his PhD from Johns Hopkins University under the direction of J.L. Ericksen.
Romesh C. Batra is a University Distinguished Professor and Clifton C. Garvin Professor of Engineering Science and Mechanics at Virginia Polytechnic Institute and State University, Blacksburg, Virginia. He was born in Village Dherowal, Punjab, India. His family migrated from Dherowal to Shahabad Markanda, Haryana, India after India became an independent country. Dr. Batra has authored the book, Elements of Continuum Mechanics, AIAA Educational Series. His research group has published in reputable refereed and widely read journals more than 460 papers of which about 40 are single-authored and nearly 320 have two authors; these are documented on the website: http://www.beam.vt.edu/batra.
Huajian Gao is a Chinese-American mechanician who is widely known for his contributions to the field of solid mechanics, particularly on the micro- and nanomechanics of thin films, hierarchically structured materials, and cell-nanomaterial interactions. He is a Distinguished University Professor at Nanyang Technological University in Singapore and Walter H. Annenberg Professor Emeritus of Engineering at Brown University. He is the editor-in-chief of Journal of the Mechanics and Physics of Solids.
Markus J. Buehler is an American materials scientist and engineer at the Massachusetts Institute of Technology (MIT), where he holds the endowed McAfee Professorship of Engineering chair. He is a member of the faculty at MIT's Department of Civil and Environmental Engineering, where he directs the Laboratory for Atomistic and Molecular Mechanics (LAMM), and also a member of MIT's Center for Computational Science and Engineering (CCSE) in the Schwarzman College of Computing. His scholarship spans science to art, and he is also a composer of experimental, classical and electronic music, with an interest in sonification. He has given several TED talks about his work.
The Warner T. Koiter Medal was established in 1996 by the American Society of Mechanical Engineers. It is awarded in recognition of distinguished work in the field of solid mechanics.
Applied mechanics is the branch of science concerned with the motion of any substance that can be experienced or perceived by humans without the help of instruments. In short, when mechanics concepts surpass being theoretical and are applied and executed, general mechanics becomes applied mechanics. It is this stark difference that makes applied mechanics an essential understanding for practical everyday life. It has numerous applications in a wide variety of fields and disciplines, including but not limited to structural engineering, astronomy, oceanography, meteorology, hydraulics, mechanical engineering, aerospace engineering, nanotechnology, structural design, earthquake engineering, fluid dynamics, planetary sciences, and other life sciences. Connecting research between numerous disciplines, applied mechanics plays an important role in both science and engineering.
A mechanician is an engineer or a scientist working in the field of mechanics, or in a related or sub-field: engineering or computational mechanics, applied mechanics, geomechanics, biomechanics, and mechanics of materials. Names other than mechanician have been used occasionally, such as mechaniker and mechanicist.
Raymond David Mindlin was an American mechanical engineer, Professor of Applied Science at Columbia University, and recipient of the 1946 Presidential Medal for Merit and many other awards and honours. He is known as mechanician, who made seminal contributions to many branches of applied mechanics, applied physics, and engineering sciences.
Daniel Charles Drucker was American civil and mechanical engineer and academic, who served as president of the Society for Experimental Stress Analysis in 1960–1961, as president of the American Society of Mechanical Engineers in the year 1973–74, and as president of the American Academy of Mechanics in 1981–82.
Anthony Glyn Evans was Alcoa Professor of Materials, professor of Mechanical Engineering, director of the Center for Multifunctional Materials and Structures and co-director for the Center for Collaborative Engineering Research and Education at the University of California, Santa Barbara, United States.
Jan Drewes Achenbach was a professor emeritus at Northwestern University. Achenbach was born in the northern region of the Netherlands, in Leeuwarden. He studied aeronautics at Delft University of Technology, which he finished with a M.Sc. degree in 1959. Thereafter, he went to the United States, Stanford University, where he received his Ph.D. degree in 1962. After working for a year as a preceptor at Columbia University, he was then appointed as assistant professor at Northwestern University.
Ares J. Rosakis, Theodore von Kármán Professor of Aeronautics and Professor of Mechanical Engineering at the California Institute of Technology. He was also the fifth Director of the Graduate Aerospace Laboratories, known as (GALCIT), and formerly known as Guggenheim Aeronautical Laboratory, and was the Otis Booth Leadership Chair, of the Division of Engineering and Applied Science.
Marco Amabili is a professor who holds the Canada Research Chair in Vibrations and Fluid-Structure Interaction, Department of Mechanical Engineering at McGill University, Montreal, Québec, Canada.
Yonggang Huang is the Jan and Marcia Achenbach Professor of Mechanical Engineering at Northwestern University.
Raymond William Ogden is a British applied mathematician. He is the George Sinclair Professor of Mathematics at the Department of Mathematics and Statistics of the University of Glasgow.
Kevin J. Hemker is the Alonzo G. Decker Chair and Professor of Mechanical Engineering at Johns Hopkins University and holds joint appointments in the Departments of Materials Science & Engineering and Earth & Planetary Sciences. He earned a BS in metallurgy from the University of Cincinnati, MS and PhD degrees in materials science and engineering from Stanford University, and completed a postdoctoral fellowship in physics at the Ecole Polytechnique Federale de Lausanne. His doctoral advisor at Stanford was Prof. William Nix. He joined the faculty at Johns Hopkins University in 1993, was an NSF National Young Investigator (1994), an invited Professor at the EPFL (1995) and the University of Paris XIII (2001), and received the ASM Materials Science Research Silver Medal in 2001. He served as Chair of the Department of Mechanical Engineering (2007–2013) and editor of Scripta Materialia (2004–2011). Hemker was a member and Vice-Chair of the DARPA Defense Science Research Council (2010–2014), a member of the SRI Technology Council (2017–2019) and was the 2018 President of The Minerals, Metals, Materials Society (TMS). He is currently a member of the HRL Technical Advisory Group and the NCMS AMMP Advisory Council. Hemker has been named Fellow of AAAS, ASME, ASM International and TMS
Somnath Ghosh is the Michael G. Callas Chair Professor in the Department of Civil & Systems Engineering and a Professor of Mechanical Engineering and Materials Science & Engineering at Johns Hopkins University (JHU). He is the founding director of the JHU Center for Integrated Structure-Materials Modeling and Simulation (CISMMS) and was the director of an Air Force Center of Excellence in Integrated Materials Modeling (CEIMM). Prior to his appointment at JHU, Ghosh was the John B. Nordholt Professor of Mechanical Engineering and Materials Science & Engineering at Ohio State University. He is a fellow of several professional societies, including the American Association for the Advancement of Science (AAAS).
Wolfgang Gustav Knauss is a German-born American engineer. He was Theodore von Kármán Professor of Aeronautics and Applied Mechanics at Caltech.
William N. Sharpe Jr. is an American engineer and professor, the Alonzo G. Decker professor of mechanics engineering.
Jian Cao is a materials scientist and mechanical engineer whose research includes the mechanical behavior and manufacturing of sheet metal and woven composite materials, including dieless deformation and laser additive manufacturing processes. She is Cardiss Collins Professor of Mechanical Engineering at Northwestern University and director of the Northwestern Initiative for Manufacturing Science and Innovation.
