Kingsbridge Branch | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Kingsbridge branch line was a single track branch line railway in Devon, England. The railway, which became known as the Primrose Line, opened in 1893 and, despite local opposition, closed in 1963. [1] It left the Exeter to Plymouth line at Brent and ran 12 miles (19 km), following the route of the River Avon, to Kingsbridge. A proposed extension to Salcombe was not constructed.
In 1849, the South Devon Railway reached Plymouth with its broad gauge railway, connecting South Devon to London over friendly associate railways.
People in Kingsbridge and the surrounding district felt cut off from the benefits of railway connection and, in 1854, an ambitious project was put forward at a public meeting: the line was to run from Churston to Kingsbridge. The meeting generated huge enthusiasm, but little money was forthcoming and the scheme went no further.
In January 1864, another meeting took place in Kingsbridge proposing a more modest scheme, from Brent station on the South Devon Railway main line to Salcombe via Kingsbridge. The cost of construction was to be £130,000, and this time tangible support was available.[ citation needed ] The scheme went to Parliament and was granted the Kingsbridge and Salcombe Railway Act 1864. [2]
That early success was not followed up with much actual money but, two years later, several deviations were required and even more capital needed. An act of Parliament[ which? ] of 23 July 1866 authorised additional capital of £60,000. A Mr Chambers was persuaded to be the contractor to the impecunious company and work started a year later, on 24 June 1867. In fact, very little was done [note 1] and, in 1871, it was proposed to abandon the scheme due to lack of money. [3]
Ten more years went by and a new Kingsbridge and Salcombe Railway was authorised by an act of Parliament, the Kingsbridge and Salcombe Railway (Extension of Time) Act 1887 (50 & 51 Vict. c. clxx) of 24 July 1887.[ dubious – discuss ] The new company purchased the rights of the earlier line for £3,500, which was to run to Ibberton Head at Salcombe. Capital was to be £160,000 for the 16-mile (26 km) line, and working arrangements were provisionally agreed with the Great Western Railway (GWR) which had, by then, absorbed the South Devon Railway.
Yet again enthusiastic planning was not matched by the raising of finance and, a year later, only £1,500 had been subscribed.
Clearly, nothing could be done in the circumstances, until, on 28 October 1885, discussions took place with the GWR about it taking over the scheme. A figure of £8,000 was tabled, increased to £10,000, which seemed to be acceptable at first. However, ambiguities arose over whether land supposed to have been acquired by the old company was legally owned. Further meetings dragged on at Paddington until, on 21 March 1888, the purchase of the unbuilt line was finally agreed. That was formally confirmed on 13 June 1888. [3]
With the resources of the GWR behind the scheme, construction was able to proceed. The cost of the line, which included 48 bridges, was £180,000. It opened on 19 December 1893, 39 years after the project had first been proposed. [3] Wrangaton station had been renamed Kingsbridge Road, but reverted to its original name on the same day. [2]
Although Brent station lay at the foot of Dartmoor hills, the line leaving Brent fell steeply at 1 in 60 to Avonwick, and continued falling, less steeply, to Gara Bridge and almost to Loddiswell. Rising there at 1 in 50, it reached a summit at Sorley Tunnel, from where it fell again at 1 in 50 to Kingsbridge. [3] [4]
Field Marshal Montgomery used the line twice during World War II, firstly to review American troops training in the area and secondly, in 1944, during Exercise Tiger. [5]
After the war, increasing use of road transport for goods and personal travel resulted in declining use of the branch line. Losses were stated to be £37,759 annually. The line closed to goods from 9 September 1963, and was intended to have closed completely on that date, but the change from summer to winter time tables of the Western National Omnibus Company, which was to provide the replacement service, was occurring the following weekend, so the closure of the line was delayed until then. The last train ran on 14 September 1963. [3]
The Cornwall Railway was a 7 ft 1⁄4 in broad gauge railway from Plymouth in Devon to Falmouth in Cornwall, England, built in the second half of the nineteenth century. It was constantly beset with shortage of capital for the construction, and was eventually forced to sell its line to the dominant Great Western Railway.
The Bristol and Exeter Railway (B&ER) was an English railway company formed to connect Bristol and Exeter. It was built on the broad gauge and its engineer was Isambard Kingdom Brunel. It opened in stages between 1841 and 1844. It was allied with the Great Western Railway (GWR), which built its main line between London and Bristol, and in time formed part of a through route between London and Cornwall.
The Buckfastleigh, Totnes and South Devon Railway built the broad gauge railway line from Totnes to Buckfastleigh and Ashburton in Devon, England.
The North Devon Railway connected Barnstaple to the growing railway network in 1854 and as Ilfracombe developed as a watering place, it was obvious a railway connection to the town was needed. The hilly terrain was very difficult, but an Ilfracombe Railway was authorised in 1864 but failed when a major shareholder was unable to respond to a subscription call. After several false starts the Barnstaple and Ilfracombe Railway, soon taken over by the London and South Western Railway, opened in 1870.
The Wellington to Craven Arms Railway was formed by a group of railway companies that eventually joined the Great Western Railway family, and connected Wellington, Shropshire and Shifnal, with Coalbrookdale, Buildwas, Much Wenlock and a junction near Craven Arms. Its objectives were dominated by the iron, colliery and limestone industries around Coalbrookdale.
The Dartmouth and Torbay Railway was a broad gauge railway linking the South Devon Railway branch at Torquay with Kingswear in Devon, England. It was operated from the outset by the South Devon Railway.
The Carmarthen and Cardigan Railway was a 7 ft 1⁄4 in broad gauge railway line in Wales that was intended to connect Carmarthen on the South Wales Railway with Cardigan. In fact, it was unable to raise the necessary capital and was loss-making from the time of opening the first short section of its line in 1860, and it was in receivership for much of its life. It eventually reached Llandysul in 1864 but was not extended further during its independent existence.
The South Devon Railway Company built and operated the railway from Exeter to Plymouth and Torquay in Devon, England. It was a 7 ft 1⁄4 in broad gauge railway built by Isambard Kingdom Brunel.
The Exeter and Crediton Railway was a 7 ft broad gauge railway that linked Exeter and Crediton, Devon, England. It was 5¼ miles (8½ km) long.
The Wilts, Somerset and Weymouth Railway (WS&WR) was an early railway company in south-western England. It obtained Parliamentary powers in 1845 to build a railway from near Chippenham in Wiltshire, southward to Salisbury and Weymouth in Dorset. It opened the first part of the network but found it impossible to raise further money and sold its line to the Great Western Railway (GWR) in 1850.
The Bristol and North Somerset Railway was a railway line in the West of England that connected Bristol with Radstock, through Pensford and further into northern Somerset, to allow access to the Somerset Coalfield. The line ran almost due south from Bristol and was 16 miles (26 km) long.
The Manchester and Milford Railway was a Welsh railway company, intended to connect Manchester and the industrial areas of North West England with a deep-water port on Milford Haven, giving an alternative to the Port of Liverpool.
Loddiswell railway station was a stop on the Kingsbridge branch line of the Great Western Railway.
The Exeter to Plymouth railway of the London and South Western Railway (LSWR) was the westernmost part of a route competing with that of the Great Western Railway (GWR) and its 'associated companies' from London and Exeter to Plymouth in Devon, England. Whereas the GWR route from Exeter followed the coast to Newton Abbot and then went around the southern edge of Dartmoor, the LSWR route followed the northern and western margins of Dartmoor, passing through the towns of Crediton, Okehampton, and Tavistock.
The Banbury and Cheltenham Direct Railway (B&CDR) was a railway company through the Cotswolds in England that built a line between points near Banbury and Cheltenham. Its principal objective, as well as a general rural rail service, was the conveyance of iron ore from the East Midlands to South Wales.
Avonwick railway station was a stop on the Kingsbridge branch line, which served the village of Avonwick in Devon, England.
Gara Bridge railway station was a stop on the Kingsbridge branch line of the Great Western Railway.
The Plymouth to Yealmpton Branch was a Great Western Railway single track branch railway line in Devon, England, that ran from Plymstock to Yealmpton. The line was planned as part of a route to Modbury, but the scheme was cut back to Yealmpton; it opened in 1898, and the passenger train service ran from Plymouth Millbay, but road competition led to declining usage and the passenger service was withdrawn in 1930.
The Birmingham, Wolverhampton and Dudley Railway was an English railway company promoted to connect those places by rail. It was authorised by Parliament in 1846. It became apparent that it would be advantageous to merge with the Great Western Railway. The rival London and North Western Railway went to great lengths to frustrate the amalgamation, but ultimately failed, and the merger took place in 1847.
The Wallingford railway branch line was a 2.5 mi (4.0 km) branch line between the market town of Wallingford and the Great Western Railway main line at Wallingford Road in Oxfordshire. The railway, which opened in 1866, was originally planned to go a further 6 mi (9.7 km) to Watlington but this was never completed because of insufficient funds. Instead Watlington was reached by a 9 mi (14 km) line completed by the Watlington and Princes Risborough Railway Company in 1872. After the Wallingford branch line opened, it ran regular passenger shuttle services to the GWR mainline for almost a century. It closed to passengers in 1959; the line escaped the Beeching Axe, remaining open for goods services until 1981.
{{cite web}}
: CS1 maint: archived copy as title (link)