Kite mooring

Last updated

Kite mooring refers to a specific method used to secure a kite in flight. The two fundamental parts of a kite are the wing and the kite line. The kite must be moored to a mobile or fixed object to develop tension in the kite line, which converts to lift and drag, enabling the kite to fly.

Contents

Governments frequently have regulations about the mooring of atmospheric balloons and atmospheric kites operating in governed airspace. The United States [1] Federal Aviation Regulation Part 101 regulates the mooring of qualified kites and balloons in U.S. governed airspace. However, these regulations do not apply to ungoverned spaces and special ambient flying media.

Static mooring

When the kite lines of a flying kite are moored to a non-moving object, the kite is considered to be statically moored. The kite operator is responsible for kites moored to static objects under both the regulations of the governing body. Mooring kites to static objects occurs for various reasons. The tension in a kite line may be so strong that the kite line pulls off its mooring or breaks the mooring. Injury to property and people may result when a kite or kite system is improperly moored. A kite may drag its mooring inadvertently so that unintended consequences occur.

Soil mooring

To fulfil the responsibility of safely mooring kites to the soil, various kinds of anchors can be used. Some kite stores sell stakes for kite anchoring (mooring). The literature has noted that dog-parking helical metal stakes make suitable soil anchors for some kites. The wind strength and kite line tension would be estimated with some safety margin in order for there to be a safe operation.

Dynamic or mobile mooring

Free-flight kite system. PilotedFreeFlightPowerParakite.jpg
Free-flight kite system.

A person holding a kite line by hand may move their hands greatly to control the kite in kite fighting or stunt-kite flying. Also, the person may walk windward or oppositely for various reasons. That all is an example of mobile kite mooring. Other mobile kite moorings include a towing scooter, a towing bicycle, a skateboard, a wave-moved surfboard or kiteboard, a cargo-ship, a boat, a horse, a dog, a raft, and many other moving vehicles or machines. Some kiters moor a kite to a floating object and let the kite tow the object across ponds, lakes, bays. Some persons moor themselves to kites and let the kite tow them across water bodies, sand expanses, and grass fields. Others moor themselves to kite lines where the kite is a very large wing while they jump off hills and mountains to fly their kites in the special kiting mode that is then called hang gliding. Since the pilot is mobile, then the mooring is a dynamic mooring. U.S. FAR 101 covers the dynamically moored manned hang gliders without using the word "mooring" in the regulation. Some hang gliders are not kites; some hang gliders are kites.

Mooring accidents

When flying a world-record-sized recreation kite, a famous professional kite flier lost his life as he became an accidental mooring of the large kite. When extreme-sport kitesurfers are themselves the dynamic mooring gone astray, they sometimes slam into rocks, buildings, people, thorns, trees and end up with minor to fatal injuries. The kite system called paraglider has the human pilot as the dynamic mooring; when collapse of the kite's wing occurs too near the ground and there is not time to use a parachute, damage occurs to people and property. When a statically moored kite-type hang glider is moored improperly, gusts sometimes lift the kite and the kite hang glider gets into a lockout condition and slams into the ground, breaking itself and sometimes causing injury to persons and other property. Mooring kites so the kite can reach electric high voltage powerlines can cause outages in electrical service and sometimes injury or death to people. Most every recreational kite sold has a tag that refers to where to fly the kite; this is implicitly telling the operator to keep the kite moored in a safe manner. Humans are responsible for the kites they anchor or set into free-flight. One of the downsides to the war-time use of barrage balloon (kytoons) involved cut tether [2] cables that dragged into power lines causing loss of production of other needed goods. See the safety list at National Kite Month: [3]

Line handling

Kite lines are stored in a mooring situation; a storage device or reels become part of the mooring. When a human kite operator holds a reel, the kite line may be let out or wound back onto the reel. The kite operator is the mooring, yet the reel is part of the mooring situation; the reel and the reeling of the kite line has many parameters that make for successful kite operating. Similarly, the kite lines for large cargo-ship kite systems need to be carefully designed to hold and operate the kite lines; huge pressures on the reels require that reels be designed to fit the task.

Kite lines may be damaged when improperly reeled; twist to the kite line may increase or decrease unwantedly when kite line let out and replaced on the reel incorrectly. The pattern of keeping the kite line on reel cores is given attention by kite operators. De-tensioning kite lines before storing on a reel is done when such is needed for safety and maintenance of kite line integrity. Avoiding excessive twist, burn, pressure accumulation, cutting, tangles, knotting during mooring are important aspects of kite operating; injury and death have resulted from inadequate care for handling kite lines. Lines moored to control bars, masts, poles, stakes, anchors, reels, hooks, etc. mean that the mooring being operated needs to have such parts mechanically sustain integrity during kite operation.

The mooring of a kite system requires the line holding mechanisms to be fully able to stay properly operating during all anticipated contingencies of flight sessions. Reels themselves are sometimes involved in special applications like generating electricity. When kiting hang glider for pay-out launching, timing of the reel's release of kite line is very important. Reels powered by scooters are kiting manned hang gliders off flatland. [4]

Kite reel patents

See also

Related Research Articles

<span class="mw-page-title-main">Aircraft</span> Vehicle or machine that is able to fly by gaining support from the air

An aircraft is a vehicle that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or the dynamic lift of an airfoil, or, in a few cases, direct downward thrust from its engines. Common examples of aircraft include airplanes, helicopters, airships, gliders, paramotors, and hot air balloons.

<span class="mw-page-title-main">Hang gliding</span> Unpowered glider air sport

Hang gliding is an air sport or recreational activity in which a pilot flies a light, non-motorised foot-launched heavier-than-air aircraft called a hang glider. Most modern hang gliders are made of an aluminium alloy or composite frame covered with synthetic sailcloth to form a wing. Typically the pilot is in a harness suspended from the airframe, and controls the aircraft by shifting body weight in opposition to a control frame.

<span class="mw-page-title-main">Unpowered aircraft</span> Aerial vehicle capable of sustaining flight without onboard propulsion

Unpowered aircraft can remain airborne for a significant period of time without onboard propulsion. They can be classified as gliders, lighter-than-air balloons and tethered kites. In the case of kites, lift is obtained by tethering to a fixed or moving object, perhaps another kite, to obtain a flow of wind over the lifting surfaces. In the case of balloons, lift is obtained through inherent buoyancy and the balloon may or may not be tethered. Free balloon flight has little directional control. Gliding aircraft include sailplanes, hang gliders, and paragliders that have full directional control in free flight.

<span class="mw-page-title-main">Fixed-wing aircraft</span> Heavier-than-air aircraft with fixed wings generating aerodynamic lift

A fixed-wing aircraft is a heavier-than-air flying machine, such as an airplane, which is capable of flight using wings that generate lift caused by the aircraft's forward airspeed and the shape of the wings. Fixed-wing aircraft are distinct from rotary-wing aircraft, and ornithopters. The wings of a fixed-wing aircraft are not necessarily rigid; kites, hang gliders, variable-sweep wing aircraft and airplanes that use wing morphing are all examples of fixed-wing aircraft.

<span class="mw-page-title-main">Paragliding</span> Soaring with a paraglider

Paragliding is the recreational and competitive adventure sport of flying paragliders: lightweight, free-flying, foot-launched glider aircraft with no rigid primary structure. The pilot sits in a harness or in a cocoon-like 'pod' suspended below a fabric wing. Wing shape is maintained by the suspension lines, the pressure of air entering vents in the front of the wing, and the aerodynamic forces of the air flowing over the outside.

<span class="mw-page-title-main">Rogallo wing</span>

The Rogallo wing is a flexible type of wing. In 1948, Francis Rogallo, a NASA engineer, and his wife Gertrude Rogallo, invented a self-inflating flexible wing they called the Parawing, also known after them as the "Rogallo Wing" and flexible wing. NASA considered Rogallo's flexible wing as an alternative recovery system for the Mercury and Gemini space capsules, and for possible use in other spacecraft landings, but the idea was dropped from Gemini in 1964 in favor of conventional parachutes.

<span class="mw-page-title-main">Winch</span> Mechanical device that is used to adjust the tension of a rope

A winch is a mechanical device that is used to pull in or let out or otherwise adjust the tension of a rope or wire rope.

Kite types, kite mooring, and kite applications result in a wide variety of kite control systems. Contemporary manufacturers, kite athletes, kite pilots, scientists, and engineers are expanding the possibilities.

This is a list of aviation-related events from 1904:

<span class="mw-page-title-main">Windsport</span>

A windsport is any type of sport which involves wind-power, often involving a non-rigid airfoil such as a sail or a power kite. The activities can be land-based, on snow, on ice or on water. Windsport activity may be regulated in some countries by aviation/maritime authorities if they are likely to interfere with other activities. Local authorities may also regulate activity in certain areas, especially on crowded beaches and parks.

<span class="mw-page-title-main">Reel</span> Device used to wind and store cord, cable and hose, etc

A reel is a device used to store elongated and flexible objects by wrapping the material around a cylindrical core known as a spool. Many reels also have flanges around the ends of the spool to help retain the wrapped material and prevent unwanted slippage off the ends. In most cases, the reel spool is hollow in order to pass an axle and allow it to spin like a wheel — a winding process known as reeling, which can be done by manually turning the reel with handles or cranks, or by machine-powered rotating via motors.

<span class="mw-page-title-main">Parafoil</span> Nonrigid airfoil with aerodynamic cell structure

A parafoil is a nonrigid (textile) airfoil with an aerodynamic cell structure which is inflated by the wind. Ram-air inflation forces the parafoil into a classic wing cross-section. Parafoils are most commonly constructed out of ripstop nylon.

A tether is a cord, fixture, or flexible attachment that characteristically anchors something movable to something fixed; it also may be used to connect two movable objects, such as an item being towed by its tow.

Airborne wind energy (AWE) is the direct use or generation of wind energy by the use of aerodynamic or aerostatic lift devices. AWE technology is able to harvest high altitude winds, in contrast to wind turbines, which use a rotor mounted on a tower.

<span class="mw-page-title-main">Glider (aircraft)</span> Aircraft designed for operation without an engine

A glider is a fixed-wing aircraft that is supported in flight by the dynamic reaction of the air against its lifting surfaces, and whose free flight does not depend on an engine. Most gliders do not have an engine, although motor-gliders have small engines for extending their flight when necessary by sustaining the altitude with some being powerful enough to take off by self-launch.

<span class="mw-page-title-main">Kite line</span>

In kiting, a line is the string or thin cord made of cotton, nylon, silk, or wire, which connects the kite to the person operating it or an anchor. Kites have a set of wings, a set of anchors, and a set of lines coupling the wings with the anchors. Kite lines perform various roles: bridle, control, tug, or special duty.

<span class="mw-page-title-main">Kite types</span>

Kites are tethered flying objects which fly by using aerodynamic lift, requiring wind for generation of airflow over the lifting surfaces.

<span class="mw-page-title-main">Paravane (water kite)</span> Towed hydrofoiled underwater object

The paravane is a towed winged (hydrofoiled) underwater object—a water kite. Paravanes have been used in sport or commercial fishing, marine exploration and industry, sports and military applications. The wings of paravanes are sometimes in a fixed position, else positioned remotely or by actions of a human pilot. Pioneer parafoil developer Domina Jalbert considered water kites hardly different from air kites. However, paravanes generally orient themselves in respect to the water surface. They may have sensors that record or transmit data or be used entirely for generating a holding force like a sea anchor does. While a sea-anchor allows a vessel to drift more slowly downwind, the paravane travels sideways at several times the downwind speed. Paravanes are, like air kites, often symmetrical in one axis and travel in two directions, the change being effected by gybing, shunting, or flipping over.

<span class="mw-page-title-main">Aerial advertising</span> Type of advertisement

Aerial advertising is a form of advertising that incorporates the use of flogos, manned aircraft, or drones to create, transport, or display, advertising media. The media can be static, such as a banner, logo, lighted sign or sponsorship branding. It can also be dynamic, such as animated lighted signage, skywriting, or audio.

The White-Miskill Act for Parasailing. is a law enacted by the legislature of the State of Florida in 2014 for the control of the sport of parasailing. It relates to commercial and recreational water activities prohibiting certain water activities within some areas and specifies the requirements for the operator of a vessel engaged in commercial parasailing.

References

  1. Federal Aviation Regulation Part 101
  2. "The Orkney Balloon Barrage". www.bbrclub.org. Retrieved 2023-01-31.
  3. "National Kite Month". Archived from the original on 2008-02-25. Retrieved 2008-02-23.
  4. "Winders". www.kites.tug.com. Retrieved 2023-01-31.