Company type | Aircraft Manufacturer |
---|---|
Founded | October 10, 1928 [1] |
Defunct | October 28, 1929 [2] |
Fate | Assets purchased |
Successor | Yellow Air Cab Company |
Headquarters | Wichita, Kansas |
Key people | Felix W. A. Knoll, T.M. "Tommy" Thomas, George Bruce, C.V. Snyder, D.E. Sauder, Harold Zipp |
Knoll Aircraft Company was an American aircraft manufacturer based in Wichita, Kansas. [3]
The Knoll Aircraft Corporation received its state charter on October 10, 1928. [4] Felix Knoll, formerly of The Rohrbach Metal Aeroplane Company (Germany) and later the Chief Engineer of the Heinkel Aircraft Company, immigrated to the United States from Germany for better opportunities. Within weeks of being in the country, Wichita business leaders recruited Felix to come to Wichita and start a company of his own. Engineering work, stress calculations, and drawings for the first model, the KN-1, were completed in Room 623 of the Broadview Hotel. [5] Felix and Herbert Schwenke; another German immigrant from The Rohrbach Metal Aeroplane Company, worked on the plans together. [6]
George Siedhoff, who owned and built the Broadview Hotel where the KN-1 was designed, was selected to build a new 50,000 square foot factory on a 148-acre tract of land at the northeast corner of Kellogg and Webb Road. [7] The building featured two stories, a mezzanine area, clear story windows, and adjacent runway. [8] Assets such as machinery, tools, and equipment were purchased from the bankruptcy of Laird Whippoorwill Airplane Company. The company set up a temporary shop at 471 W 1st street in the former building of both the Travel Air Company and Laird Whippoorwill. [9] By the end of December, 1928, the first airplane was ready to fly.
Over five hundred spectators gathered around the East Airport to watch the KN-1 first flight. Amongst the crowd were Lloyd Stearman, Walter Beech, reporters, and motion picture cameramen. [10] The December 30, 1928 first test flight was so successful that pilot Howard Jones chose to double the planned time and stayed in the air for thirty minutes. He took the airplane through loops, rolls, and power dives. [11]
The KN-2 and KN-3 models shared the common airframe of the KN-1, though they were upgraded with more powerful 300 and 425 horsepower engines. The KN-3 also had an open-place cockpit in back of the cabin, allowing the seating of one additional passenger inside. [12] Art Goebel, a pilot famous for winning the 1928 Dole Air Race from San Diego to Hawaii, was to have a larger custom built KN-4 to race around the world. [13]
On June 12, 1929, test-pilot Russell Dick flying the Knoll KN-3, beat the US Army's Lieutenant Walker piloting a Thomas-Morse pursuit plane in a race performing at the Wichita Air Show. [14] On June 21 he performed again at the Aerial Wedding of Kansas, Oklahoma, Missouri, and Texas. He did steep power dives from 3000 feet to 100 feet, thrilling the crowds and demonstrating the strength of the airframe. [15]
The first and fourth aircraft produced were purchased by Mexican interests at a time of civil war. [16] The delivery of the aircraft were later held up by political and registration issues en route. On June 2, 1929, the new factory building under construction at Kellogg and Webb road was severely damaged by a storm. [17] On June 16, 1929, 6,000 new shares of capital stock were released. [18] [19]
In July 1929 the company was not paying its bills. The company assets were found to be embezzled soon afterward. [20] Demand for new aircraft in the summer of 1929 was softening. [21] Arguments between the board of directors and management broke out over the necessity of building the new factory, the hiring of too many engineers, and also the Yunker contract work. [22] [23] Payment for the Yunker work was to have been stock in the Yunker Aircraft Company. [24] The lack of funds, and sales combined with the depression, halted production with three new aircraft in development. The company was placed into receivership on August 26, 1929, under the management of Ray Theis. [25] The company began moving into the new factory on August 27, 1929. [26]
On October 28, 1929 the company was shut down and on December 18, the assets were liquidated at auction. Roy Buckley purchased the manufacturing machinery and equipment. He would later found the Buckley Aircraft Company. George Siedhoff purchased uncompleted airframe sections and parts, as well as the rights to X8899. C.V. Snyder bought the new plant and grounds. [27] The Yellow Air Cab Company, in turn, bought it in late 1930. The airport property was then purchased by Beechcraft in 1940 and became their Plant II. [28]
Model name | First flight | Number built | Type | Engine | Horsepower | Registration [29] |
---|---|---|---|---|---|---|
Knoll KN-1 | 1928 | 3 | Cabin biplane | Wright J-5 | 220 | X9090, X8861, * |
Knoll KN-2 | 1929 | 1 | Cabin biplane | Wright J-6 | 300 | X8899 |
Knoll KN-3 | 1929 | 1 | Cabin biplane with open cockpit aft | Pratt and Whitney R-1340 | 425 | X9950 |
Knoll KN-4 | 0 | Cabin biplane (planned derivative) | ||||
Knoll KN-5 | 0 | Sport biplane (in development) | ||||
Knoll KN-6 | 0 | Amphibian (in development) | ||||
Knoll KN-22 | 0 | Multiengine seaplane (in development) | Packard 3A-2500 V12 (8 qty) | 800 each | ||
Name | Title | Country | Other Employment |
---|---|---|---|
Felix Knoll | Vice-President and Chief Engineer | Germany | Chief Designer of Heinkel Aircraft, Rohrbach Metal Aeroplane Company [31] |
Herbert Schwenke | Engineer | Germany | Chief of Airplane Design, Rohrbach Metal Aeroplane Company [32] |
Alfred Longardt | Engineer | Germany | First Assistant of Airplane Design, Heinkel Aircraft [33] |
Dr. Friederich Dawid | Engineer | Germany | Professor at German Aeronautical Technical University [34] |
Karl Ziller | Engineer | Germany | Chief Engineer at Dornier Flugzeugwerke [35] |
Ernst Froelich | Engineer | Germany | Departmental Chief of Engineering, Rohrbach Metal Aeroplane Company [36] |
Egon Winter | Engineer | Germany | Statics Department Head, Dornier Flugzeugwerke [37] |
Gerhardt Schmidt | Engineer | Netherlands | Wing Department Head, Fokker Company [38] [39] |
Harold Zipp | Engineer | USA | Went on to co-design the Model 70 Stearman biplane. [40] |
Dick Bollby | Welding Department Head [41] | USA | |
Russell Dick | Test-pilot [42] | USA | Went on to become Braniff, then TWA Captain [43] |
Howard Jones | Chief Test-pilot [44] | USA | Went on to Dept of Commerce/died Fleet monoplane crash Buffalo NY [45] [46] |
Charles Quick | Factory Superintendent [47] | USA | Quick Air Motors founder and inventor [48] |
Emil Zeck | Sheetmetal Construction Specialist [49] | Switzerland | |
Source: [50]
General characteristics
Performance
Source: [51]
General characteristics
Performance
Source: [52]
General characteristics
Performance
The Beechcraft Model 76 Duchess is an American twin-engined monoplane built by Beechcraft intended partly as a low cost introduction to twin-engine aircraft.
The Mooney M-18 "Mite" is a low-wing, single-place monoplane with retractable, tricycle landing gear.
The Metal Aircraft Flamingo was a monoplane produced in Cincinnati, Ohio by the Metal Aircraft Corporation in the 1930s.
The Cessna Model CW-6 was a 1920s American six-seat touring aircraft built by the Cessna Aircraft Company.
The PWS-1 was a Polish two-seat fighter and reconnaissance aircraft constructed by Podlaska Wytwórnia Samolotów (PWS) in 1927. It remained a prototype for its entire lifespan.
The Swallow Airplane Company was an early manufacturer of airplanes.
The Stearman M-2 Speedmail was a mail-carrier aircraft produced by the Stearman Aircraft Company of Wichita, Kansas. It first flew in January 1929. The Speedmail was a single-seat biplane, with two large cargo compartments in place of a front cockpit. The fuselage and tail unit were constructed from welded chrome-moly steel tube faired with wooden formers and fabric covered aft of the pilot's cockpit, and detachable aluminium alloy panels covered the fuselage forward of the cockpit. The wings were constructed from spruce spars and plywood built-up ribs, all fabric covered. It differed from previous Stearman aircraft by having a tailwheel instead of a tailskid due to its size and weight.
The American Eagle A-129 was an American biplane first flown in 1929.
Beech Factory Airport is a public use airport located five nautical miles (9 km) east of the central business district of Wichita, a city in Sedgwick County, Kansas, United States. It is privately owned by Beechcraft.
The MXS is a single-seat aerobatic aircraft made of carbon fiber and built by MX Aircraft Company, a manufacturer located at Jandakot Airport in Perth, Western Australia. The MXS-R is a race variant flown by several pilots in the Red Bull Air Race World Championship. The planes are all-composite in construction, piston-powered, low-wing monoplanes. They are produced both in kit form for amateur construction, and completed ready to fly at the factory.
The Alliance A-1 Argo was an American-built two-seat biplane of the late 1920s.
The PWS-5 or PWS-5t2, was a multi-seated Polish liaison aircraft, developed in 1928 by PWS.
The PWS-11 was a Polish aerobatic and trainer aircraft, developed in 1928-1929 by PWS, which remained a prototype.
Yellow Air Cab Company was a short lived American aircraft manufacturer based in Kansas.
The Merkel Mark II is an American homebuilt aerobatic biplane that was designed by Edwin Merkel and produced by the Merkel Airplane Company of Wichita, Kansas in the form of plans for amateur construction.
Yunker Aircraft Company was an American aircraft manufacturer of the late 1920s
The history of Wichita details the history of Wichita, Kansas from its initial settlement in the 1860s to the present day.
The Rearwin Ken-Royce was an American three-seat sport/touring biplane built by Rearwin Airplanes first in Salina, Kansas then Kansas City. It was the first airplane built by the company.
G Elias & Brother was an American manufacturer of cabinets and aircraft based in Buffalo, New York in the 1920s. A.G. Elias sat on the Manufacturers Aircraft Association's board of directors along with President Frank H. Russell, VP Glenn L. Martin, Charles L. Laurence, Chance M. Vought, S.S. Bradley, George P. Tidmarsh, and Donald Douglas. E.J Elias promoted the construction of a Buffalo municipal airport to aid the local fledgling airplane industry of five aviation companies constructing airplanes and airplane parts. From 1920 to 1925, Elias company's chief engineer, David Earle Dunlap (1896-1957), designed the Elias EM-2 Expeditionary planes. He designed the NBS-3 bomber fuselage and the Elias M-1 Mail plane. Dunlap's Elias TA-1 design was the first United States Army Air Corps Trainer to have a radial engine. After tests a McCook Field, the Army Air Corps selected other manufacturers over the Elias bomber and trainer. The company designed the Elias EM-1 to meet requirements for a multirole amphibian marine expeditionary aircraft. Elias delivered six production Elias EM-2 aircraft with Liberty engines to the United States Navy in 1922.
The Swallow Model C Coupé is an American-built general-purpose high-wing monoplane of the mid 1930s. E. B. Christopher, Swallow Aircraft Company president and designer of the Model C, was killed in the crash of an early example that he was flying.
{{cite news}}
: Missing or empty |title=
(help){{cite journal}}
: Missing or empty |title=
(help){{cite journal}}
: Missing or empty |title=
(help)