| Alpha | |
|---|---|
 | |
| Kohler Alpha | |
| Role | Glider |
| National origin | United States |
| Designer | Spud Kohler |
| First flight | 1965 |
| Introduction | 1965 |
| Number built | One |
| Developed from | Schreder Airmate HP-11 |
The Kohler Alpha is an American, mid-wing, V-tailed, FAI Open Class single seat glider that was designed and built by Spud Kohler of Cleveland, Ohio. [1] [2] [3]
Kohler built the Alpha in 1965 as a development of the Schreder Airmate HP-11. He used the wings from the HP-11 and combined this with a newly designed fuselage and tail. Kohler expressed the opinion that a sailplane's performance is mostly determined by its wing, while the fuselage imparts character to the design. The fuselage that he designed must have contributed to the performance, though, as the Alpha has a glide ratio two points higher than the HP-11 with the same wing. [1] [2]
The Alpha fuselage is made from wood, with some fiberglass components incorporated. The fuselage uses a circular cross-section from nose to tail, with the diameter varying from the 12 in (30 cm) diameter at the tail to a 24 in (61 cm) diameter at the cockpit. The HP-11 wing is of all-metal and features a 26:1 aspect ratio, a 52 ft (15.8 m) wingspan and a NACA 65 (3)-618 airfoil. The v-tail is removable by first removing the tailcone and then withdrawing two pins. The controls are adapted from a Piper PA-24 Comanche. The landing gear is a retractable monowheel and a tail skid. The tail skid was later replaced with a tail wheel. [2]
The Alpha had a number of owners and, according to Federal Aviation Administration registry records was most recently transferred to the Jimmy Doolittle Air & Space Museum at Travis Air Force Base, in Solano County, California. The museum does not currently indicate the aircraft is part of their collection, nor is it on display. [3] [4] [5]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
Related development
Related lists
The Schleicher Ka 6 is a single-seat glider designed by Rudolf Kaiser, built by Alexander Schleicher GmbH & Co, Germany and is constructed of Spruce and plywood with fabric covering. The design initially featured a conventional tailplane and elevator which was later replaced by an all-moving tailplane in the -Pe and Ka 6E variants. Variants built before the -CR and -BR used a main skid as the principal undercarriage, with later variants including the Ka 6E using a wheel as the main undercarriage with no nose skid. Other modifications for the Ka 6E include a more aerodynamic fuselage with glassfibre nose and wingroot fairings, longer canopy, and modified aluminium airbrakes.
The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.
The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The Ross-Johnson RJ-5 is a single seat competition glider that was designed by Harland Ross and constructed partially by Ross and finished by Dick Johnson. The RJ-5 became one of the most famous gliders ever built when Johnson flew it 535 mi (861 km) in 1951, setting a new world distance record that endured for 13 years.
The Ross RH-3 is a single seat, mid-wing glider that was designed by Harland Ross.
The Laister LP-46 and LP-49 are a family of American high-wing, single-seat, gliders that were designed by Jack Laister and produced by Laister Sailplanes both as kit aircraft and as certified complete aircraft.
The Schreder Airmate HP-8 is an American, high-wing single seat glider that was designed by Richard Schreder after the loss of the HP-7 in 1957.
The Schreder Airmate HP-9 is an American high wing, single seat glider that was designed by Richard Schreder and intended to be flown by the designer in the 1960 World Gliding Championships.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Bartos/Nobel BN-1 Phantom is an American, two-seat, mid-wing glider designed by Gene Bartos in the late 1960s.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Bennett-Carter CBS-1 Dottie S is an American high-wing, strut-braced single-seat glider that was designed by George Bennett and Richard Carter and first flown in 1958.
The Hutchinson HS-127 is an American mid-wing glider that was designed and built by Vernon Hutchinson.
The Luenger Beta 1 was an American high-wing, single-seat, T-tailed FAI Open Class glider designed by Hans Luenger and Spud Kohler.
The Oldershaw O-2, officially registered as the Oldershaw Jana-Linn O-2, is an American high-wing, single seat, V-tailed glider that was designed and built by Vernon Oldershaw.
The Moore SS-1 is an American high-wing, single seat, FAI Standard Class glider that was designed and constructed by Arien C. Moore of Sweet Home, Oregon.
The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.
The Prue UHP-1 is an American high-wing, single-seat, T-tailed FAI Open Class glider that was designed by Irving Prue.
The CVV 8 Bonaventura was a two-seat competition glider designed and built in Italy during the 1950s. Fifteen were produced.