LIBIS-17

Last updated

LIBIS-17
RoleTwo seat advanced glider trainer
National origin Slovenia
Manufacturer LIBIS (Letalski Institut "Branko Ivanus" Slovenia), Ljubliana
DesignerJože Prhavc
First flightOctober 1961
Introductionfirst production model June 1963
Number built12 by Spring 1964

The LIBIS-17 was a two-seat sailplane for advanced glider training. It was built in Yugoslavia (Slovenia) in the early 1960s and achieved production.

Contents

Design and development

The LIBIS-17, originally known as the LIBIS KB-17, was designed to provide tandem seat training in advanced gliding flight, including aerobatics and cloud flying, as well as solo experience to gold and silver C standard as a single seater. It had a high wing of 5° dihedral, built around a single spar. The leading edge was a plywood torsion box, supported by Styrofoam, and the rest of the wing was fabric covered. The ailerons were of the Frise type, wooden, foam filled and fabric covered. It had Hütter type plate spoilers just behind the spar. Both vertical and horizontal rear stabilizers were all-moving, single piece surfaces, fitted with servo tabs. Both were wooden structures, near-rectangular in shape, with Styrofoam filling. [1]

The fabric covered fuselage had a steel tube structure. The wing was mounted on a pylon which formed the rear of the cockpit. This seated two in tandem, under a framed, forward hinged, single piece canopy. A transparency in the wing leading edge assisted the upwards visibility from the rear seat. Aft of the wing the fuselage was slender and of rectangular cross-section. The LIBIS-17 had a bicycle undercarriage with a single mainwheel, fitted with brakes, and a smaller nosewheel. [1]

The prototype LIBIS-17 first flew in October 1961. The first production aircraft followed in June 1963 and 12 had been built by the following Spring, with production continuing. [1] There is photographic evidence of a motorised version, with an engine and propeller on a mast above the wing. [2]

Aircraft on display

A LIBIS-17 is on display in the Museum of Aviation (Belgrade).

Specifications

Data from Jane's All the World's Aircraft 1966/7 [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Fieseler Fi 5</span>

The Fieseler Fi 5 was a single-engined two-seat sportplane of the 1930s. It was produced by the German aircraft manufacturer Fieseler Flugzeugbau, which was started by the World War I fighter ace and German aerobatic star, Gerhard Fieseler.

<span class="mw-page-title-main">Slingsby Eagle</span> British two-seat glider, 1954

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

<span class="mw-page-title-main">Wassmer WA-30 Bijave</span> French two-seat glider, 1958

The Wassmer WA-30 Bijave is a French two-seat advanced training glider designed and built by Wassmer Aviation of Issoire.

The Horikawa H-22B-3 is a simple, open frame, two seat primary trainer glider designed and built in Japan in the 1950s.

The Kirigamine Mita is a training glider, seating two in tandem, designed in Japan in the early 1960s. A modified version, first flown in 1966, was produced in modest numbers.

The Lie-Fang 1, some sources Jeifang 1, was one of the first gliders designed and built in China, though with Polish design input. It is an all-wood, two seat, intermediate training aircraft which first flew in 1958.

<span class="mw-page-title-main">Scheibe Specht</span> German two-seat glider, 1953

The Scheibe Specht is a tandem seat training glider produced in Germany in the early 1950s. More than fifty were built.

The IIL IS-7 was a two-seat, sailplane designed by Iosif Șilimon and built in Romania in the late 1950s. Only one prototype was built.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

The IIL IS-12 was a two-seat glider, designed and built in Romania in 1960. It had a wooden wing but a metal fuselage and was constructed in parallel with the all-wood IS-13 for comparative tests. It was later followed by the IS-13a, a version with an all-metal wing.

The Schneider ES49 is a two-seat glider trainer, designed, first flown in late August 1951 and commercially produced in Germany but later built from plans by gliding clubs in Australia. A major redesign there led to the ES49B Kangaroo.

The Civil Aviation Department BS-1 Bharani was a tandem seat trainer glider designed and built in India in the early 1960s.

The Civil Aviation Department Kartik was an Indian single seat competition glider first flown in 1963. It was built in small numbers and remained under development until 1975.

The Civil Aviation Department Ashvini was the first two-seat glider designed and built in India. It was produced in small numbers in the early 1960s.

The WNF Wn 16 was an Austrian experimental aircraft built near the start of World War II to test a tricycle undercarriage.

The Aviad Zigolo MG12 is an Italian kitbuilt introductory motor-glider first flown in 2012. It has a small engine and limited gliding performance but is inexpensive to buy and run and simple to build and fly. Kit production began in 2013 and by the following year twenty had been sold.

The Warsztaty Szybowcowe Mewa was a Polish, high performance, two seat sailplane flown in 1936 and built in small numbers.

<span class="mw-page-title-main">Rubik R-16 Lepke</span> Type of aircraft

The Rubik R-16 Lepke (Butterfly) was a single seat Hungarian training glider designed to follow the very similar but two seat Rubik R-15 Koma in a winch-launch training programme. The Lepke provided solo experience of the techniques learned with an instructor in an aircraft with similar handling characteristics. That done, the Lepke could be used as a standard trainer to take its pilot to C-certificate level. The pair were widely used by Hungarian glider clubs post-war, with sixty-five of each produced.

<span class="mw-page-title-main">PGE E-31 Esztergom</span> Type of aircraft

The E-31 Esztergom was the standard single-seat training glider used in Hungary from about 1967 into the 1980s. Fifty were produced.

The Politechnika Warszawska PW-3 Bakcyl (Microbe) is a Polish primary glider developed from the PW-2 Gapa.

References

  1. 1 2 3 4 Taylor, John W R (1966). Jane's All the World's Aircraft 1966–67. London: Sampson Low, Marston & Co. Ltd. p. 407.
  2. ↑ "LIBIS-17" . Retrieved 14 January 2011.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.