LNER Pacifics

Last updated

The London and North Eastern Railway (LNER) operated various classes steam locomotives with a 4-6-2 (or pacific) wheel arrangement. The LNER operated more pacifics than any other of the Big Four British railway companies, and they were mostly used for express passenger work along the East Coast Main Line, though later in their lives many were displaced to other lines.

Contents

Overview

A1 LNER Pacific 4474 on King's Cross turntable (CJ Allen, Steel Highway, 1928).jpg
A1
A2 A2 class 1923.jpg
A2
A3 Ferryhill Down 'Northumbrian' Express at Metal Bridge geograph-2276569-by-Ben-Brooksbank.jpg
A3
A4 Harringay West 3 station geograph-2283619-by-Ben-Brooksbank.jpg
A4
A1/1 Walton railay geograph-2259118-by-Ben-Brooksbank.jpg
A1/1
A2/2 York Locomotive Yard with A2-2 Pacific geograph-2827807-by-Ben-Brooksbank.jpg
A2/2
A2/3 Grantham Locomotive Depot geograph-2272186-by-Ben-Brooksbank.jpg
A2/3
Peppercorn A2 Doncaster witth Glasgow - King's Cross express passing geograph-2828825-by-Ben-Brooksbank.jpg
Peppercorn A2

In 1923, the LNER inherited four pacifics, to two classes each consisting of two locomotives, one class from either of two of its constituents, the Great Northern Railway (GNR) and the North Eastern Railway (NER). The Great Northern Pacifics, were of GNR Class A1, designed by Nigel Gresley and numbered 1470/1. The NER had completed two Pacifics, Nos 2400/1, designed by Vincent Raven. The LNER adopted the GNR classification system by wheel arrangement, with the A-prefix indicating the most prestigious wheel arrangement. The GNR Class A1s remained Class A1 and the NER Pacifics were reclassified A2.

The LNER also classified Pacific tank engines with A-numbers, and these were initially classified A5-7, and were eventually joined by a class A8. However, because of their different lineage and operational use, they are not further considered here.

The LNER completed an additional three A2s in 1924. In 1929 2404 City of Ripon was fitted with a modified A1 boiler, but otherwise the A2s bore little resemblance to the remaining LNER Pacifics which were the continued evolution of the same basic Gresley design. The Raven Class A2s were all withdrawn from stock in 1936/7, freeing the A2 designation for later reuse.

Comparisons between the A1 and A2s revealed the A1s to be superior, so they were selected for more building. A total of 52 A1s were eventually built. From 1928, the A1s were started to be fitted with a higher pressure superheated boiler. This reboilering took them into Class A3, and eventually all but one of the 52 A1s would be rebuilt to Class A3, the process taking until 1948. In addition, a total of 27 new A3s (Nos 2743-2752, 2595-2599, 2500-2508, 2795,2796,2797) were built.

In 1929 a single experimental Class W1 "Hush-Hush" locomotive was constructed. The W1 was rebuilt in 1936 to a more conventional 4-6-4, retaining its W1 classification. Although not technically not a Pacific, but a Hudson, there were many engineering similarities and operationally it shared similar duties.

The next class to be introduced was the Class A4 in 1935. A total of 35 were built with large streamlined casing. One of these A4s, 4469 Sir Ralph Wedgwood was destroyed during the Baedeker raid during World War II.

Post-war, the initially straightforward classification system for LNER Pacifics started to break down. In 1945, Edward Thompson rebuilt the first A1 Great Northern. This was initially kept classified A1 and the few remaining A1s were reclassified A10. The intention was always to rebuild the remaining A10s into A1s, however this was not done as the rebuild was not successful and they were instead rebuilt to A3s; the Class A10 becoming extinct in 1948. Instead, a brand new class of 49 Peppercorn Class A1s were introduced in 1948/9, and in anticipation of these Great Northern was reclassified as Class A1/1 in 1947.

In 1943 and 1944 Thompson also rebuilt the Class P2s into Class A2/2s. In 1944, Thompson built another subclass when another subclass of A2s originally ordered as V2s, these being the LNER Thompson Class A2/1. Another fifteen new engines were built to a third design and classified A2/3.

Under the LNER's 1946 renumbering scheme, the Class A4s were given the lowest (i.e. most prestigious) numbers 1-34. The A3s and few remaining A10s were renumbered 35-112 and the Thompson A1/1 Great Northern became No. 113. The Thompson A2s were given 1946 numbers from rebuilding. The A2/1 becoming 507-10, A2/2 501-6, and the A2/3 becoming 500/11-24. A single Peppercorn Class A2, No. 525, was completed before nationalisation in 1948, but a further 6 were given LNER numbers (Nos 526-31) before BR decided on a numbering system. BR then added 60000 to all LNER Pacific numbers, though it took a while to apply these. The remaining Peppercorn Class A2s received their BR numbers 60532-9 from new, as did the LNER Peppercorn Class A1s which were numbered 60114-62.

Withdrawal

Excluding the Raven Class A2s, and one A4 which was destroyed by bombing during the war, British Railways withdrew the LNER Pacifics from stock between 1959 and 1966. The W1 (technically not a pacific by wheel arrangement but sharing many features) was withdrawn in 1959.

Summary of Withdrawals by BR
Year A1/1 Class A1 Class A2/1 Class A2/2 Class A2/3 Class A2 Class A3 Class A4 Total
1959000200103
1960003300006
1961001100608
196216008813440
1963060042331156
1964011000023741
196502400322637
19660200031612
Total1494615157934203

Preservation

A total of eight original LNER Pacifics have been preserved; six of these are A4s (of which two are in North America), one A3 and one Peppercorn A2.

Preserved LNER Pacifics
LNER No.LNER 1946 No.BR No.NameClass
4498 7 60007 Sir Nigel Gresley A4 North Yorkshire Moors Railway Undergoing overhaul at the National Railway Museum.
4496 8 60008 Dwight D Eisenhower A4 National Railroad Museum, Green Bay, Wisconsin Static display
4488 9 60009 Union of South Africa A4 Thornton, Fife Boiler Ticket expired
4489 10 60010 Dominion of Canada A4 Canadian Railway Museum Static display
4464 19 60019 Bittern A4 Mid Hants Watercress Railway Static display
4468 22 60022 Mallard A4 National Railway Museum, York Static display
4472 103 60103 Flying Scotsman A3 National Railway Museum, York Operational and approved for mainline use.
-- 60532 Blue Peter A2 (Peppercorn) Barrow Hill Engine Shed Located at Barrow Hill Roundhouse awaiting restoration

Tornado

New build locomotive 60163 Tornado Tornado-141208.jpg
New build locomotive 60163 Tornado

In addition to the preserved engines above, a new build Peppercorn Class A1, 60163 Tornado was completed in August 2008.

Related Research Articles

The London and North Eastern Railway (LNER) produced several classes of locomotive, mostly to the designs of Nigel Gresley, characterised by a three-cylinder layout with a parallel boiler and round-topped firebox. It produced the most iconic locomotive of its day, 4468 'Mallard', the holder of the world steam locomotive speed record. It also built the world-famous 4472 'Flying Scotsman'. However, its locomotive inheritance was much greater than just the 'A4 Class', it also produced highly successful mixed-traffic and freight designs.

LNER Peppercorn Class A1 class of British 4-6-2 locomotives

The London and North Eastern Railway (LNER) Peppercorn Class A1 is a type of express passenger steam locomotive. Forty-nine original Peppercorn Class A1s were built to the design of Arthur Peppercorn during the early British Railways era, but all were scrapped with the discontinuation of steam, with none of the original production run surviving into preservation. In 2008, a brand new 50th Peppercorn A1 locomotive, 60163 Tornado, was completed.

Class A1 in the London and North Eastern Railway's classification system may refer to any of the following British steam locomotives :

LNER Gresley Classes A1 and A3 London and North Eastern Railway 3-cylinder 4-6-2 locomotives

The London and North Eastern Railway LNER Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.

LNER Peppercorn Class A2 class of 15 British 4-6-2 locomotives

The London and North Eastern Railway (LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after Edward Thompson. All save the first of the 15 built were constructed under British Railways after nationalisation in 1948.

Arthur Peppercorn English railway engineer

Arthur Henry Peppercorn, was an English railway engineer, and was the last Chief Mechanical Engineer (CME) of the London and North Eastern Railway.

NER Class S3 class of 70 British 4-6-0 locomotives

The North Eastern Railway Class S3, classified B16 by the LNER, was a class of 4-6-0 steam locomotive designed for mixed traffic work. It was designed by Vincent Raven and introduced in 1920. The earlier members of this class were fitted with Westinghouse Brakes - all of this equipment was removed during the 1930s.

Edward Thompson was an English railway engineer, and was Chief Mechanical Engineer of the London and North Eastern Railway between 1941 and 1946. Edward Thompson was born at Marlborough, Wiltshire on 25 June 1881. He was the son of an assistant master at Marlborough College. He was educated at Marlborough before taking the Mechanical Science Tripos at Pembroke College, Cambridge, earning a third class degree. Thompson's academic background contrasts with that of his predecessor Nigel Gresley, who had also attended Marlborough, but then gained practical experience as a pupil at Horwich Works.

GNR Class J23 class of 102 saturated 0-6-0T locomotives, later LNER classes J50 and J51

The Great Northern Railway Class J23 was a class of 0-6-0T steam locomotive. They had long side tanks that came to the front of the smokebox, which sloped forwards to improve visibility and had a recess cut in to aid maintenance. Forty were built by the Great Northern Railway (GNR) between 1913 and 1922, with a further 62 being added by the London and North Eastern Railway (LNER) between 1924 and 1939. They were given the nickname "Submarines" due to their long tanks.

LNER Thompson Class B2 class of 10 two-cylinder 4-6-0 locomotives rebuilt from Class B17

The London and North Eastern Railway (LNER) Thompson Class B2 was a class of 4-6-0 steam locomotive. It was introduced in 1945 as a two-cylinder rebuild of the three-cylinder LNER Class B17. Ten were rebuilt from Class B17 but no more were rebuilt because of the success of the LNER Thompson Class B1.

LNER Class A2 class of 5 British three-cylinder 4-6-2 locomotives, later LNER class A2

The first London and North Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway. Two were built by the NER in 1922 before the grouping and another three by the LNER in 1924. Their LNER numbers were 2400–2404. All five locomotives were named by the LNER.

LNER Class V4 class of 2 three-cylinder 2-6-2 locomotives

The London and North Eastern Railway Class V4 was a class of 2-6-2 steam locomotive designed by Sir Nigel Gresley for mixed-traffic use. It was Gresley's last design for the LNER before he died in 1941. The V4s had similarities in their appearance and mechanical layout to the V2 "Green Arrow" class. The V2s, introduced some years before, were large and heavy locomotives, with very limited route availability. The V4 was a lightweight alternative, suitable for use over the whole of the LNER network.

LNER Thompson Class A1/1 class of 1 three-cylinder 4-6-2 locomotive rebuilt from Class A1 (Gresley)

The LNER Class A1/1 consisted of a single 4-6-2 "Pacific" express passenger locomotive rebuilt in 1945 from an A1 class locomotive, by Edward Thompson. It was intended as the prototype of a new design of pacific locomotives improving the A4 design of Thompson’s predecessor Sir Nigel Gresley. No further examples were built due to Thompson’s retirement in 1946.

GNR Class H3 Class of 65+10 British 2-6-0 locomotives

The Great Northern Railway Class H2 and H3 was a class of 2-6-0 steam locomotive designed for mixed-traffic work.

Willie Brayshaw Yeadon, was a British railway historian known for his magnum opus, Yeadon's Register of LNER Locomotives and other works.

LNER Thompson Class A2/1 class of 4 three-cylinder 4-6-2 locomotives

The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.

LNER Thompson Class A2/3 class of 15 three-cylinder 4-6-2 locomotives

The London and North Eastern Railway (LNER) Class A2/3 was a class of 4-6-2 steam locomotives. They were newly constructed locomotives, fulfilling the requirement identified by Edward Thompson for a standard express passenger locomotive of the 4-6-2 arrangement with 6 ft 2 in (1.880 m) driving wheels. Fifteen engines were constructed according to this original design, but following the retirement of Thompson as CME, the remaining fifteen locomotives that were planned were immediately redesigned and ultimately emerged as Peppercorn Class A2.

LNER Thompson Class A2/2 class of 6 three-cylinder 4-6-2 locomotives rebuilt from P2 class 2-8-2 locomotives

The London and North Eastern Railway Class A2/2 was a class of six 4-6-2 steam locomotives rebuilt by Edward Thompson in 1943 and 1944 from his predecessor’s P2 Class of 2-8-2 express passenger locomotives. The rebuilds were not particularly successful and all were withdrawn and scrapped between 1959 and 1961.

The Great Northern Railway GNR Class A1 1470 Great Northern was the first of 52 A1 class locomotives. It has also represented three distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. For the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway before the amalgamation of 1923, for which they became a standard design. Eventually Great Northern was completely rebuilt as Class A1/1.

References