LNER Peppercorn Class A2

Last updated

LNER Peppercorn Class A2
Doncaster witth Glasgow - King's Cross express passing geograph-2828825-by-Ben-Brooksbank.jpg
60533 Happy Knight at Doncaster in 1953.
Type and origin
Power typeSteam
Designer Arthur Peppercorn
Builder Doncaster Works
Build date1947–1948
Total produced15
Specifications
Configuration:
​
 •  Whyte 4-6-2
 •  UIC 2′C1′ h3
Gauge 4 ft 8+1⁄2 in (1,435 mm)
Leading dia. 3 ft 2 in (0.965 m)
Driver dia.6 ft 2 in (1.880 m)
Trailing dia. 3 ft 8 in (1.118 m)
Wheelbase 60 ft 6 in (18.44 m) ​
 • Engine34 ft 4 in (10.46 m)
 • Coupled13 ft 0 in (3.96 m)
Length71 ft 0.5 in (21.654 m)
Axle load 22 long tons (22.4 t; 24.6 short tons)
Loco weight101 long tons (102.6 t; 113.1 short tons)
Total weight160.5 long tons (163.1 t; 179.8 short tons)
Fuel type Coal
Fuel capacity9 long tons (9.1 t; 10.1 short tons)
Water cap.5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:​
 • Grate area50 sq ft (4.6 m2)
Boiler pressure250  psi (1.72  MPa)
Heating surface:​
 • Firebox245 sq ft (22.8 m2)
 • Tubes1,212 sq ft (112.6 m2)
 • Flues1,005 sq ft (93.4 m2)
 • Total surface2,461 sq ft (228.6 m2)
Superheater:
​
 • Heating area680 sq ft (63 m2)
Cylinders Three
Cylinder size 19 in × 26 in (483 mm × 660 mm)
Valve gear Walschaerts
Valve typePiston valves
Performance figures
Tractive effort 40,430 lbf (179.84 kN)
Career
Operators London and North Eastern Railway  » British Railways
Class LNER: A2
Power classBR: 8P7F
Axle load class Route Availability 9
WithdrawnNovember 1962 - June 1963, April 1965 - December 1966
DispositionOne preserved; remainder scrapped

The London and North Eastern Railway (LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after Edward Thompson. All save the first of the 15 built were constructed under British Railways after nationalisation in 1948. Only one example is preserved.

Contents

Design

The A2s were a development on the 6 ft 2 in driving wheel locomotives of Peppercorn's predecessor, Edward Thompson. Thompson's designs were rebuilds of pre-existing Gresley designs, in addition to being constrained by wartime pressures. With a dilapidated locomotive and rolling stock fleet, Peppercorn designed his A2s to augment Thompson's designs and replace the aging Gresley locomotives.

Peppercorn's design was influenced greatly by Thompson's A2/3 design, although his design differed most obviously with the less stretched look. This was achieved by moving the outside cylinders forward over the leading truck and amending the steam ducts, shortening the smokebox and wheelbase while retaining the same cylinder and valve gear arrangement. [1] However, this came at the cost of either discarding the Kylchap exhaust or the self-cleaning device in the smokebox, of which the former was omitted by the design team. A new smoke deflector design was fitted, although the omission of the Kylchap exhaust led to visibility issues during service. [1] Some Gresley styled features returned in the form of the V-shaped cab and the 'Banjo Dome' steam collector. [2] Much of the rest of the locomotive remained the same as the Thompson A2/3, utilising the same 250  psi (1.72  MPa ) boiler with a total heating surface of 3141.04 sq-ft, heated by a 50 sq-ft grate, powering a 19in by 26in cylinder, controlled from an electrically lit cab. This gave a tractive effort of 40,430 lb all whilst staying in a maximum axle load of 22 tonnes. The boiler utilised a small percentage of nickel plate for the barrel, saving 7cwt without compromising integrity. [2]

Construction

The first of the Peppercorn A2s, No. 525 A.H.Peppercorn, was outshopped from Doncaster in December 1947 on the eve of nationalisation, and named after the designer of the class, Arthur Peppercorn. The first two of the class were turned out in LNER apple green livery, and this colour was also applied to the next 13 engines delivered between January and August 1948. Repainting in British Railways Brunswick green began the following year. Another 20 members of the class were also planned, but were put on hold and ultimately cancelled on 4 May 1948 after the 1948 Locomotive Exchanges. [3] [4] No. 60539 Bronzino emerged in August 1948 with Kylchap double blastpipe and chimney in place of the self-cleaning apparatus as an experiment, with Nos. 60526, 60529, 60532, 60533 and 60538 similarly modified in 1949. [5] [6]

LNER 1946 NosBR NosYear
525605251947
526–53160526–311948
60532–391948

Performance

The class's 50 sq ft grate, a remnant of the P2 lineage (from both Thompson and Peppercorn) boilers, meant the A2's were capable of high power and endurance; however, with the exception of the Aberdeen road, there was little need for this large grate firebox in the postwar era, and as a result, on comparable duties the A2's were heavier on fuel than the Gresley machines which pre-dated them, but for outright power and haulage capability, they were the logical successor to the P2 class, and finally provided the answer the Edinburgh-Aberdeen route required. As a result, they were amongst the last multi-cylindered express steam locomotive classes to remain in service in the UK.

Stock list

Only No. 525 was built during LNER ownership, but 526-31 received LNER 1946 numbers. From 60532 onwards, the A2s received BR numbers from new, BR numbers being the LNER 1946 numbers with the addition of 60000. With the exception of No. 525, named after the last Chief Mechanical Engineer of the LNER, they were named after racehorses.

LNER No.BR No.NameEntered ServiceWithdrawn
52560525 A.H. Peppercorn [7] December 1947March 1963
52660526Sugar PalmJanuary 1948November 1962
52760527 Sun Chariot January 1948April 1965
52860528 Tudor Minstrel February 1948June 1966
52960529 Pearl Diver February 1948December 1962
53060530 Sayajirao March 1948November 1966
53160531 Bahram March 1948December 1962
- Blue Peter March 1948December 1966
-60533 Happy Knight April 1948June 1963
-60534 Irish Elegance April 1948December 1962
-60535Hornets BeautyMay 1948June 1965
-60536TrimbushMay 1948December 1962
-60537Bachelors ButtonJune 1948December 1962
-60538VelocityJune 1948November 1962
-60539BronzinoAugust 1948November 1962

Service

Initially, the A2s were based at depots the length of the East Coast Main Line, ranging from New England (Peterborough) in the south to Edinburgh's Haymarket. It is said that Edinburgh Haymarket and Aberdeen Ferryhill shed welcomed the engines in stark comparison to the Thompson A2/2 and A1/1. [6] In 1949, five were put to work on the Edinburgh-Dundee-Aberdeen route and proved the ideal engines for its stiff gradients and sharp curvature. The A2s also worked to Perth, Glasgow, Carlisle, Newcastle upon Tyne and occasionally more southerly outposts. In 1963, Nos. 60525, 60530, and 60535 crossed the LNER-LMS divide and were allocated to a Glasgow depot, Polmadie. They replaced ex-LMS Coronation Class over the ex-Caledonian Railway route to Carlisle.

The final years of the A2s came in eastern Scotland with many notable performances over the Aberdeen road during the early 1960s. No. 60527 Sun Chariot started from Aberdeen with a 400-ton train and reached Montrose, Arbroath and Dundee ahead of schedule. [6] In 1961 on Stoke bank in Lincolnshire, the location of Mallard's 1938 world speed record, No. 60526 Sugar Palm achieved 101 mph (163 km/h) with the up “West Riding” express. [8] Withdrawals began in the following year. Neither 60526 Sugar Palm or No. 60525 A. H. Peppercorn were saved for preservation.

Withdrawal

Withdrawal in England occurred during 1962 and 1963. Withdrawal in Scotland was completed in 1966. [9] The last three engines - 60528 Tudor Minstrel, 60530 Sayajirao and 60532 Blue Peter - were retired in June 1966.

YearQuantity in
service at
start of year		Quantity
withdrawn		Locomotive numbersNotes
196215860526/29/31/34/36–39
19637260525/33
196450—
19655260527/35
19663360528/30/32No. 60532 preserved.

Preservation

60532 Blue Peter, as preserved. Hugh llewelyn 60532 (5371150220).jpg
60532 Blue Peter, as preserved.

One Peppercorn A2, 60532 Blue Peter, has survived.

Related Research Articles

<span class="mw-page-title-main">LNER Class A4</span> Class of locomotives designed by Sir Nigel Gresley

The LNER Class A4 is a class of streamlined 4-6-2 steam locomotive designed by Nigel Gresley for the London and North Eastern Railway in 1935. Their streamlined design gave them high-speed capability as well as making them instantly recognisable, and one of the class, 4468 Mallard, holds the record as the world's fastest steam locomotive. Thirty-five of the class were built to haul express passenger trains on the East Coast Main Line route from London Kings Cross via York to Newcastle, and later via Newcastle to Edinburgh, Scotland. They remained in service on the East Coast Main Line until the early 1960s when they were replaced by Deltic diesel locomotives; they themselves proving to be worthy successors to the A4s. Several A4s saw out their remaining days until 1966 in Scotland, particularly on the Aberdeen – Glasgow express trains, for which they were used to improve the timing from 3.5 to 3 hours.

<span class="mw-page-title-main">LNER Thompson Class B1</span> Class of locomotives

The London and North Eastern Railway (LNER) Thompson Class B1 is a class of steam locomotive designed by Edward Thompson for medium mixed traffic work.

<span class="mw-page-title-main">LNER Peppercorn Class A1</span> Class of British 4-6-2 locomotives

London and North Eastern Railway's (LNER) Peppercorn Class A1 is a class of 4-6-2 "Pacific" steam locomotives largely built between 1948 and 1949 at Doncaster and Darlington Works to a design of Arthur Peppercorn. Forty-nine were built for hauling express passenger services on the East Coast Main Line owned by LNER's successor, British Railways' North Eastern Region. None of the original 49 Peppercorn A1s survived into preservation, with the last being scrapped in 1966. The 50th Peppercorn A1, 60163 Tornado, was completed in 2008 as an evolved member of its class.

Class A1 in the London and North Eastern Railway's classification system may refer to any of the following British steam locomotives :

<span class="mw-page-title-main">LNER Gresley Classes A1 and A3</span> Class of 4-6-2 pacific locomotive designed by Sir Nigel Gresley

The London and North Eastern Railway Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.

Arthur Henry Peppercorn, was an English railway engineer, and was the last Chief Mechanical Engineer (CME) of the London and North Eastern Railway.

Edward Thompson was an English railway engineer, and was Chief Mechanical Engineer of the London and North Eastern Railway between 1941 and 1946. Edward Thompson was born at Marlborough, Wiltshire on 25 June 1881. He was the son of Francis Thompson, assistant master at Marlborough College. He was educated at Marlborough before taking the Mechanical Science Tripos at Pembroke College, Cambridge, earning a third class degree. Thompson entered the railway scene after education, contrasting that of his predecessor Nigel Gresley, who had also attended Marlborough after gaining practical experience as a pupil at Horwich Works.

<span class="mw-page-title-main">GNR Class O2</span>

The Great Northern Railway (GNR) Class O2 was a class of three-cylinder 2-8-0 steam locomotives designed by Nigel Gresley for freight work and built by the GNR from 1921. Further examples were built by the London and North Eastern Railway (LNER) from 1924.

<span class="mw-page-title-main">LNER Thompson Class B2</span>

The London and North Eastern Railway (LNER) Thompson Class B2 was a class of 4-6-0 steam locomotive. It was introduced in 1945 as a two-cylinder rebuild of the three-cylinder LNER Class B17. Ten were rebuilt from Class B17 but no more were rebuilt because of the success of the LNER Thompson Class B1.

<span class="mw-page-title-main">LNER Thompson Class L1</span>

The London and North Eastern Railway (LNER) Thompson Class L1 was a class of 2-6-4T steam locomotives designed by Edward Thompson. The prototype no. 9000 was built in 1945, but the remaining 99 were built under British Railways jurisdiction between 1948–1950. The prototype was well received, however the production batch were not, and all were withdrawn and scrapped between 1960 and 1962.

<span class="mw-page-title-main">LNER Class P2</span> Class of 6 three-cylinder 2-8-2 locomotives

The London and North Eastern Railway Class P2 was a class of 2-8-2 steam locomotives designed by Sir Nigel Gresley for working heavy express trains over the harsh Edinburgh to Aberdeen Line. As they were to serve on Scottish expresses, they were given famous names from Scottish lore.

<span class="mw-page-title-main">LNER Class A2</span>

The first London and North Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway. Two were built by the NER in 1922 before the grouping and another three by the LNER in 1924. Their LNER numbers were 2400–2404. All five locomotives were named by the LNER.

<span class="mw-page-title-main">LNER Thompson/Peppercorn Class K1</span>

The London and North Eastern Railway (LNER) Class K1 is a type of 2-6-0 (mogul) steam locomotive designed by Edward Thompson. Thompson preferred a simple two-cylinder design instead of his predecessor Nigel Gresley's three-cylinder one. The seventy K1s were intended to be split between the North Eastern Region of British Railways and the Eastern Region of British Railways.

<span class="mw-page-title-main">LNER Class V4</span>

The London and North Eastern Railway Class V4 was a class of 2-6-2 steam locomotive designed by Sir Nigel Gresley for mixed-traffic use. It was Gresley's last design for the LNER before he died in 1941. The V4s had similarities in their appearance and mechanical layout to the V2 "Green Arrow" class. The V2s, introduced some years before, were large and heavy locomotives, with very limited route availability. The V4 was a lightweight alternative, suitable for use over the whole of the LNER network.

<span class="mw-page-title-main">LNER Thompson Class A1/1</span>

The LNER Class A1/1 consisted of a single 4-6-2 "Pacific" express passenger locomotive rebuilt in 1945 from an A1 class locomotive, by Edward Thompson. It was intended as the prototype of a new design of pacific locomotives improving the A4 design of Thompson's predecessor Sir Nigel Gresley. No further examples were built due to Thompson's retirement in 1946.

LNER Peppercorn Class A2 60532 <i>Blue Peter</i> 4-6-2 locomotive built 1948

LNER Peppercorn Class A2 No. 60532 Blue Peter is a 4-6-2 ("Pacific") steam locomotive built in 1948 at Doncaster Works to a design by Arthur Peppercorn, hauling express passenger services on British Railways' North Eastern Region. It is the only Peppercorn A2 in existence after the 14 other locomotives of its class were scrapped.

The London and North Eastern Railway (LNER) operated various classes steam locomotives with a 4-6-2 wheel arrangement. The LNER operated more pacifics than any other of the Big Four British railway companies, and they were mostly used for express passenger work along the East Coast Main Line, though later in their lives many were displaced to other lines.

<span class="mw-page-title-main">LNER Thompson Class A2/1</span>

The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.

<span class="mw-page-title-main">LNER Thompson Class A2/3</span> Class of British express passenger locomotive

The London and North Eastern Railway (LNER) Class A2/3 was a class of 4-6-2 steam locomotives. They were newly constructed locomotives, fulfilling the requirement identified by Edward Thompson for a standard express passenger locomotive of the 4-6-2 arrangement with 6 ft 2 in (1.880 m) driving wheels. Fifteen engines were constructed according to this original design, but following the retirement of Thompson as CME, the remaining fifteen locomotives that were planned were immediately redesigned and ultimately emerged as Peppercorn Class A2.

<span class="mw-page-title-main">LNER Thompson Class A2/2</span> British steam locomotive

The London and North Eastern Railway Class A2/2 was a class of six 4-6-2 steam locomotives rebuilt by Edward Thompson in 1943 and 1944 from his predecessor Sir Nigel Gresley's P2 Class of 2-8-2 express passenger locomotives. The rebuilds improved reliability and reduced maintenance, but also suffered from a variety of issues during service, and all were withdrawn and scrapped between 1959 and 1961.

References

  1. 1 2 Hillier-Graves 2021, p. 206.
  2. 1 2 Hillier-Graves 2021, p. 207.
  3. ↑ Boddy, Neve & Yeadon 1973, p. 183.
  4. ↑ Hillier-Graves 2021, p. 219.
  5. ↑ Hillier-Graves 2021, p. 211.
  6. 1 2 3 Allen 1962, p. 107.
  7. ↑ Boddy, Neve & Yeadon 1973, p. 190.
  8. ↑ Allen 1962, pp. 107, 109.
  9. ↑ Green-Hughes, Evan (December 2010). "Peppercorn 'A2s'". Hornby Magazine. No. 42. Hersham: Ian Allan Publishing. pp. 64–67. ISSN   1753-2469. OCLC   226087101.

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.