LNER Class W1 | |||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
|
The LNER W1 No. 10000 (also known as the Hush-Hush due to its secrecy) was an experimental steam locomotive fitted with a high pressure water-tube boiler. Nigel Gresley was impressed by the results of using high-pressure steam in marine applications and so in 1924 he approached Harold Yarrow of shipyard and boilermakers Yarrow & Company of Glasgow to design a suitable boiler for a railway locomotive, based on Yarrow's design.
The boiler was not the usual Yarrow design. In operation, particularly its circulation paths, the boiler had more in common with other three-drum designs such as the Woolnough. It has also been described[ by whom? ] as an evolution of the Brotan-Deffner water-tube firebox, with the firebox extended to become the entire boiler.
The boiler resembled two elongated marine Yarrow boilers, joined end to end. Both had the usual Yarrow triangular arrangement of a central large steam drum above two separated water drums, linked by multiple rows of slightly curved tubes. The rearward "firebox" area was wide and spanned the frames, placing the water drums at the limits of the loading gauge. The forward "boiler" region was narrow-set, with its water drums placed between the frames. The space outboard of the tubes formed a pair of exhaust flues leading forwards. A large space outside these flue walls but inside the boiler casing was used as an air duct from the air inlet, a crude rectangular slot beneath the smokebox door, which had the effect of both pre-heating the combustion air and also cooling the outer casing to prevent overheating. Longitudinal superheater tubes were placed between the steam generating tubes. The third area forwards contained superheater headers, the regulators and the smokebox. The external boiler casing remained at much the same width throughout, giving an overall triangular, but curved, appearance. The lower edge of each section stepped upwards, and was obvious externally.
Working pressure was of 450 pounds per square inch (31.0 bar; 3,100 kPa) as opposed to the 180 pounds per square inch (12.4 bar; 1,240 kPa) of the contemporary Gresley A1 locomotives.
The heavy forgings for the main drums were built in Sheffield by the John Brown shipyard. [1] The boiler was constructed and fitted to the frames by Yarrow in Glasgow, involving the rolling chassis being carried over the LMS, carefully sheeted over to avoid inspection by a rival railway company. This chassis was a 4-2-2-4 at this point, as the centre drivers and rods had not yet been fitted. The first works photographs, with the boiler cladding in grey, were taken in Glasgow, with a wooden dummy centre driver and coupling rod added for the photo.
This apparatus was based on a Gresley Pacific 4-6-2 chassis, although with an additional axle to accommodate the extra length. This resulted in a 4-6-4 wheel arrangement, making No. 10000 the only standard gauge 4-6-4 tender engine to run on a British railway (although there were several standard gauge 4-6-4T classes that ran in Great Britain).
In UIC notation this wheel arrangement could be described as a 2′C1′1′ (or more fully, 2′C1′1′h4vS) as the two trailing axles were independent, rather than a four-wheeled bogie as for those leading. The forward axle was similar to that of the Pacifics, having outside frames and Cartazzi axleboxes. The rear axle was an inside-framed Bissel truck, pivoted ahead of the leading axle.
The high pressure necessitated compound expansion; steam being supplied to the two 12-by-26-inch (305 mm × 660 mm) high-pressure inside cylinders and then fed into two larger 20-by-26-inch (508 mm × 660 mm) low-pressure outside cylinders before going to exhaust. High-pressure cylinder diameter was subsequently reduced to 10 in (254 mm). Gresley incorporated an ingenious unique system for giving independent cutoff to the high-pressure cylinders using only two sets of Walschaerts valve gear derived from the outside cranks on the Von Borries principle [2] and using an inside half-length expansion link. [3]
The locomotive was completed at Darlington Works in 1929. It had a corridor tender and ran non-stop London to Edinburgh services to time in 1930; nevertheless steaming was relatively poor during test runs, and in spite of a number of modifications initially to the exhaust, boiler performance never reached the standards of an equivalent firetube boiler. A problem never fully solved was air leakage into the casing. [4]
The corridor tender was similar to the ten built in 1928 for those locomotives of classes A1 and A3 that were used on non-stop services such as the Flying Scotsman. The 1929 tender differed from the 1928 tenders in a few details, such as being provided with disc wheels instead of spoked, and having the in-curved front ends of the side sheets finishing 7 feet 10 inches (2.39 m) apart instead of 6 feet 11 inches (2.11 m), in order to suit the W1 cab as opposed to the A1/A3 cab. [5]
When it was deemed that no further progress could be made, the locomotive was taken to Doncaster Works in 1936 and rebuilt with a conventional boiler and three simple expansion cylinders on the normal Gresley layout. A modified A4 boiler was fitted which had 50 sq ft (4.6 m2) of grate area and 20 in (508 mm) diameter cylinders. The valves were considered undersized for the large cylinder diameter and this somewhat limited the speed capabilities of the engine. Its haulage capacity was nonetheless appreciated. The rebuilt engine still retained its additional axle, resulting in a more spacious cab for the driver and fireman. The tender was not rebuilt, but was modified slightly at the front so that the ends of the curved side sheets now finished 8 feet 2+3⁄8 inches (2.499 m) apart; it was also given streamlined plating at the top (which was removed again in January 1938) and a longer coal chute. [6] After the rebuild, the water-tube boiler returned to Darlington for pressure experiments and space heating, before being broken up on 10 April 1965, six years after the rebuilt W1. [7]
No. 10000 never carried a name, although it did carry small works plates on the smoke deflectors bearing the number 10000. In its early form, it was known unofficially as the Hush-Hush as a result of the initial secrecy surrounding the project, and also the Galloping Sausage as a result of its bulging boiler shape. [8] Plans in 1929 to name the original engine British Enterprise were dropped, although nameplates had already been cast; [9] a 1951 plan to name the rebuilt engine Pegasus did not come to fruition either. [10] During a works visit in May/June 1948, the corridor tender was exchanged for one of the non-corridor type, and it was given British Railways livery and renumbered 60700. [10]
On 1 September 1955, 60700 had just departed from Peterborough when the front bogie frame broke. The locomotive derailed at a speed of 20 miles per hour (32 km/h) at Westwood Junction. It was recovered and repaired. [11]
60700 was withdrawn on 1 June 1959 and was broken up for scrap at the Doncaster Works later that year. The first of its two tenders did survive into preservation. Corridor tender No. 5484 is now attached to No. 4488 Union of South Africa. [7] [5]
In January 2020 Hornby Railways announced that it would be producing a model Hush Hush/W1 in both original and rebuilt forms in 00 gauge covering the locomotive's lifespan. These were original condition as No. 10000, original condition but with the British Enterprise nameplates that were cast but never used, original condition in LNER apple green as seen on collectible cards of the time, rebuilt LNER garter blue and rebuilt in BR green with early emblem as No. 60700. In January 2021 three more versions were announced, including original condition but with a double chimney as No. 10000, Rebuilt in LNER photographic grey, and rebuilt in BR with late crest as No. 60700. Previously the model was only available as a metal kit.
A locomotive booster for steam locomotives is a small supplementary two-cylinder steam engine back-gear-connected to the trailing truck axle on the locomotive or one of the trucks on the tender. It was invented in 1918 by Howard L. Ingersoll, assistant to the president of the New York Central Railroad.
The London and North Eastern Railway LNER Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.
The London and North Eastern Railway (LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after Edward Thompson. All save the first of the 15 built were constructed under British Railways after nationalisation in 1948. Only one example is preserved.
The Great Eastern Railway (GER) Class S69, also known as 1500 Class, and later classified B12 by the London and North Eastern Railway (LNER) is a class of 4-6-0 steam locomotive designed to haul express passenger trains from London Liverpool Street station along the Great Eastern Main Line. Originally they were designed by S. D. Holden, but were much rebuilt, resulting in several subclasses.
The GER Class A55 or Decapod was an experimental steam locomotive with an 0-10-0T wheel arrangement designed by James Holden for the Great Eastern Railway. It was the first ten-coupled steam locomotive in Great Britain.
The London and North Eastern Railway (LNER) Class B17, also known as "Sandringham" or "Footballer" class was a class of 4-6-0 steam locomotive designed by Nigel Gresley for hauling passenger services on the Great Eastern Main Line. In total 73 were built.
The London and North Eastern Railway Class P1 Mineral 2-8-2 Mikado was a class of two steam locomotives designed by Nigel Gresley. They were two of the most powerful freight locomotives ever designed for a British railway. It was initially intended they be a more powerful 2-10-0 version of the earlier Class O2 2-8-0s. The design was submitted in August 1923, for use between Peterborough and London, and also between Immingham and Wath marshalling yard. The power was quoted as being 25% more than the O2.
The Great Northern Railway (GNR) Class C1 is a type of 4-4-2 steam locomotive. One, ex GNR 251, later LNER 2800, survives in preservation. Much like their small boiler cousins, they were capable of reaching speeds of up to 90 mph (145 km/h). They were also known as Large Atlantics.
The London and North Eastern Railway (LNER) Thompson Class L1 was a class of 2-6-4T steam locomotives designed by Edward Thompson. The prototype no. 9000 was built in 1945, but the remaining 99 were built under British Railways jurisdiction between 1948–1950. The prototype was well received, however the production batch were not, and all were withdrawn and scrapped between 1960 and 1962.
The London and North Eastern Railway Class P2 was a class of 2-8-2 steam locomotives designed by Sir Nigel Gresley for working heavy express trains over the harsh Edinburgh to Aberdeen Line. As they were to serve on Scottish expresses, they were given famous names from Scottish lore.
The first London and North Eastern Railway (LNER) Class A2 was a class of 4-6-2 steam locomotive designed by Vincent Raven for the North Eastern Railway. Two were built by the NER in 1922 before the grouping and another three by the LNER in 1924. Their LNER numbers were 2400–2404. All five locomotives were named by the LNER.
The London and North Eastern Railway Class V4 was a class of 2-6-2 steam locomotive designed by Sir Nigel Gresley for mixed-traffic use. It was Gresley's last design for the LNER before he died in 1941. The V4s had similarities in their appearance and mechanical layout to the V2 "Green Arrow" class. The V2s, introduced some years before, were large and heavy locomotives, with very limited route availability. The V4 was a lightweight alternative, suitable for use over the whole of the LNER network.
The LNER Class A1/1 consisted of a single 4-6-2 "Pacific" express passenger locomotive rebuilt in 1945 from an A1 class locomotive, by Edward Thompson. It was intended as the prototype of a new design of pacific locomotives improving the A4 design of Thompson's predecessor Sir Nigel Gresley. No further examples were built due to Thompson's retirement in 1946.
The London and North Eastern Railway (LNER) operated various classes steam locomotives with a 4-6-2 wheel arrangement. The LNER operated more pacifics than any other of the Big Four British railway companies, and they were mostly used for express passenger work along the East Coast Main Line, though later in their lives many were displaced to other lines.
The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.
The London and North Eastern Railway Class A2/2 was a class of six 4-6-2 steam locomotives rebuilt by Edward Thompson in 1943 and 1944 from his predecessor Sir Nigel Gresley's P2 Class of 2-8-2 express passenger locomotives. The rebuilds improved reliability and reduced maintenance, but also suffered from a variety of issues during service, and all were withdrawn and scrapped between 1959 and 1961.
Three-drum boilers are a class of water-tube boiler used to generate steam, typically to power ships. They are compact and of high evaporative power, factors that encourage this use. Other boiler designs may be more efficient, although bulkier, and so the three-drum pattern was rare as a land-based stationary boiler.
The GCR Class 11E was a type of 4-4-0 steam locomotive used by the Great Central Railway for express passenger services. Ten were built in the railway's own workshops at Gorton, Manchester during 1913; they remained in service until the mid-1950s.
GCR Class 9P was a design of four-cylinder steam locomotive of the 4-6-0 wheel arrangement built for hauling express passenger trains on the Great Central Railway in England. A total of six were built: one in 1917, and five in 1920. They were sometimes known as the Lord Faringdon class, from the name of the first one built.
The NER Class Z was an Atlantic class of locomotives designed by Vincent Raven. It was introduced in 1911.