NBR A class

Last updated

NBR A Class
LNER Classes N14 & N15
Bathgate Locomotive Depot ex NBR N15 0-6-2T geograph-2887287-by-Ben-Brooksbank.jpg
N15/1 No. 69219 at Bathgate Locomotive Depot 19 September 1962
Type and origin
Power typeSteam
Designer William P. Reid
Builder North British Locomotive Company, Robert Stephenson and Company
Build date1909-1923
Total produced105
Specifications
Configuration:
   Whyte 0-6-2
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 6 in (1.372 m)
Trailing dia. 3 ft 9 in (1.143 m)
Loco weightvarious see below
Fuel typeCoal
Boiler pressure175 lbf/in2 (1.21 MPa)
Cylinders Two, inside
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Valve gear Stephenson
Performance figures
Tractive effort 23,205 lbf (103.22 kN)
Career
Operators
Withdrawn1947-1962
DispositionAll scrapped

The NBR A Class (London and North Eastern Railway (LNER) Classes N14 and N15 were the standard 0-6-2 tank locomotives designed by William P. Reid for freight duties on the North British Railway. The LNER regarded the original locomotives as two separate classes (N14 & N15). The final batch of locomotives was on order at the time of the grouping in 1923. [1]

Contents

History

N14 Class

The original six locomotive introduced in 1909 and had inside cylinders and piston valves operated by Stephenson valve gear, and weighed 62 LT 10 cwt (63.5 t). They were built by the North British Locomotive Company and numbered 858-863. They were withdrawn 1947-1954. [2]

N15/1 Class

Fifty three similar locomotives were built by the North British Locomotive Company between June 1910 March 1917 with longer cabs but shorter bunkers. They were fitted with Steam brakes and used on Freight duties. A further batch of ten locomotives was built by North British Locomotive Company in February and March 1920. A third batch of ten was on order from Robert Stephenson and Company when the North British Railway became a constituent of the LNER. They were delivered between January and March 1923. They weighed 60 LT 18 cwt (61.9 t) and were numbered to fill gaps in the sequence between 20 and 926. Two of these locomotives were later fitted with Westinghouse brakes in 1929 and were re-classified N15/2. The remainder were withdrawn between 1957 and 1962. [2]

N15/2 Class

Six N15/1 locomotives were built by the North British Locomotive Company with Westinghouse brakes in 1910. They were used to bank passenger trains up the 1 in 42 Cowlairs incline leading from Glasgow Queen Street railway station. Prior to 1910 trains had been rope hauled by a stationary engine. A further two N15/1 were converted to N15/2 in 1929. They weighed 62 LT 1 cwt (63.0 t) and were numbered to fill gaps in the sequence between 7 and 282 and were withdrawn between 1957 and 1962. [3]

Related Research Articles

The London and North Eastern Railway (LNER) produced several classes of locomotive, mostly to the designs of Nigel Gresley, characterised by a three-cylinder layout with a parallel boiler and round-topped firebox. It produced the most famous locomotive of its day, 4468 'Mallard', the holder of the world steam locomotive speed record. It also built the world-famous 4472 'Flying Scotsman'. However, its locomotive inheritance was much greater than just the 'A4 Class', it also produced highly successful mixed-traffic and freight designs.

<span class="mw-page-title-main">GER Class Y14</span> Class of 0-6-0 mixed traffic locomotives built by the Great Eastern Railway

The Great Eastern Railway (GER) Class Y14 is a class of 0-6-0 steam locomotive. The LNER classified them J15.

<span class="mw-page-title-main">NBR C Class</span>

The NBR C Class is a class of 0-6-0 steam locomotives designed by Matthew Holmes for freight work on the North British Railway (NBR). They were introduced in 1888 with inside cylinders and Stephenson valve gear. A total of 168 locomotives was built, of which 123 came into British Railways ownership at nationalisation in 1948. This was the last class of steam engine in service in Scotland.

<span class="mw-page-title-main">NBR K Class</span> Class of British locomotives

The NBR K Class is a class of 4-4-0 steam locomotive of the North British Railway. The first batch was designed by Matthew Holmes in 1902 and had 6-foot-6-inch (1.981 m) driving wheels for express passenger work. Three more batches were designed by William P. Reid with 6-foot-0-inch (1.829 m) driving wheels for mixed traffic work. This included perishable goods, such as fish from Mallaig and Aberdeen. They had inside cylinders and Stephenson valve gear. The D34 locomotives, commonly known as Glen Class, were built with superheaters. The LNER later fitted superheaters to all D26, D32, and D33 engines as well. All engines of the K class are sometimes known as Glen Class, although the designation is strictly reserved to the fourth (D34) batch.

<span class="mw-page-title-main">GER Class S69</span>

The Great Eastern Railway (GER) Class S69, also known as 1500 Class, and later classified B12 by the London and North Eastern Railway (LNER) is a class of 4-6-0 steam locomotive designed to haul express passenger trains from London Liverpool Street station along the Great Eastern Main Line. Originally they were designed by S. D. Holden, but were much rebuilt, resulting in several subclasses.

<span class="mw-page-title-main">NBR M Class 4-4-0</span>

The NBR Class M was a class of 4-4-0 steam locomotive of the North British Railway. The class was created during the tenures of William P. Reid and Walter Chalmers by rebuilding three earlier types, the "574", "633", and "729", which had all been designed by Matthew Holmes, and shared many features in common. A total of 48 were produced.

The LD&ECR class A was a class of 0-6-2T steam locomotives of the Lancashire, Derbyshire and East Coast Railway. An initial batch of eight was ordered and built in 1895. An order for 15 more was placed in 1899 but five of these were not delivered because the LD&ECR was unable to pay for them. The undelivered locomotives were re-sold by Kitson & Co. to the Hull and Barnsley Railway and became H&BR Class F1. There are some detail differences between the LD&ECR class A and the H&BR Class F1 but these were the result of later modifications.

<span class="mw-page-title-main">GER Class C72</span>

The GER Class C72 was a class of thirty 0-6-0T steam locomotives designed by A. J. Hill for the Great Eastern Railway. They passed to the London and North Eastern Railway (LNER) at the 1923 grouping and received the LNER classification J68.

<span class="mw-page-title-main">NBR 224 and 420 Classes</span> Two classes of British 4-4-0 locomotives

The NBR 224 and 420 Classes consisted of six steam locomotives of the 4-4-0 wheel arrangement built by the North British Railway (NBR) in 1871 and 1873. No. 224 had three claims to fame: it was the first inside-cylinder 4-4-0 engine to run in Great Britain; it was the locomotive involved in the Tay Bridge disaster; and after rebuilding in 1885, it was the only compound-expansion locomotive on the NBR, and one of just three tandem compounds in Britain.

<span class="mw-page-title-main">GER Class G69</span>

The GER Class G69 was a class of twenty 2-4-2T steam locomotives built by for the Great Eastern Railway by S. D. Holden in 1911–12 following the design of two rebuilt examples of the GER Class M15 designed by James Holden, his father, in 1904. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F6.

<span class="mw-page-title-main">GER Class M15</span>

The GER Class M15 was a class of 160 2-4-2T steam locomotives designed by Thomas William Worsdell and built for the Great Eastern Railway between 1884 and 1909. The original (F4) class of locomotives were fitted with Joy valve gear which was notoriously difficult to 'set'. This earned them the nickname of 'Gobblers' thanks to their high coal consumption rates. As a result, between 1911 and 1920, 32 of them were rebuilt by James Holden with Stephenson valve gear and higher pressure boilers. Despite this, the nickname stuck for many years after.

<span class="mw-page-title-main">NBR S class</span>

The NBR S Class was a class of 0-6-0 steam locomotive designed by William Paton Reid for freight work on the North British Railway. The engines were initially designated as B class, being a development of the standard B class locomotives designed by Reid some eight years previously, and represented the culmination of a long evolution on the NBR of powerful 0-6-0 freight engines. The new locomotives were introduced in 1914 and had superheaters, inside cylinders and piston valves operated by Stephenson valve gear.

<span class="mw-page-title-main">NER Class B1</span>

The NER B and B1 Classes were two classes of 0-6-2 tank locomotives designed by Thomas William Worsdell for heavy freight and mineral on the North Eastern Railway, introduced in 1886. They were tank engine versions of the NER C1 Class 0-6-0, using both simple expansion and also the von Borries configuration for two-cylinder compound locomotives. Both types were later rebuilt using superheated steam and the compounds were also rebuilt as simple expansion locomotives, and eventually formed a single class. Many of the superheated locomotives were also later returned to saturated steam as their original boilers wore out. As a result the classes have had a very complex mechanical history.

The NBR 141 Class consisted of two steam 2-4-0 locomotives built by the North British Railway (NBR) in 1869. They were the direct antecedents of the NBR 224 Class 4-4-0.

<span class="mw-page-title-main">NER Class U</span>

The NER Class U was a class of 0-6-2 tank locomotives of the North Eastern Railway. It was designed by Wilson Worsdell and introduced in 1902.

The GER Class Y65 was a class of twelve 2-4-2T steam locomotives designed by S. D. Holden and built by the company's Stratford Works in 1909–1910. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F7.

<span class="mw-page-title-main">GER Class C32</span>

The GER Class C32 was a class of fifty 2-4-2T steam locomotives designed by James Holden and built by the company's Stratford Works between 1892 and 1902. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F3.

<span class="mw-page-title-main">NBR N class</span> Steam locomotive of the North British Railway

The NBR Class N was a class of 4-4-0 steam locomotive of the North British Railway. The class was designed by Matthew Holmes and later rebuilt by Holmes's successor, Reid. A total of 12 were produced.

The NBR Class D was a class of 0-6-0 steam locomotive of the North British Railway, often known as the Wee Drummonds. The class was designed by Dugald Drummond. A total of 101 were produced.

<span class="mw-page-title-main">NBR F class</span>

The NBR F Class was a class of 0-6-0 tank locomotives, designed by William P. Reid on the North British Railway. They were used for dockyard shunting duties.

References