GCR Class 11B

Last updated

Great Central Railway Class 11B
GCR 11B locomotive 1014 Sir Alexander (Howden, Boys' Book of Locomotives, 1907).jpg
1014 Sir Alexander
Type and origin
Power typeSteam
Designer John G. Robinson
Builder
Build date1901-02 (30), 1904 (10) [1]
Total produced40 [1]
Specifications
Configuration:
   Whyte 4-4-0
   UIC 2'Bn2, later 2'Bh2
Gauge 4 ft 8+12 in (1,435 mm)
Leading dia. 3 ft 6 in (1.067 m) [2] [3]
Driver dia.6 ft 9 in (2.057 m) [2] [3]
Length56 ft 5.5 in (17.209 m)
Loco weight55.7 long tons (56.6 t) [2] [3]
Firebox:
  Grate area21.17 sq ft (1.967 m2) [2]
Boiler:
  Diameter4 ft 9.5 in (1,460 mm) to 5 ft (1,500 mm)
Boiler pressure180 psi (1.24 MPa) [1] [3]
Heating surface1,260 sq ft (117 m2)
Superheater:
  Heating area22 elements, 178 sq ft (16.5 m2)
Cylinders Two, inside
Cylinder size 18.5 in (470 mm) bore
26 in (660 mm) stroke [3]
Valve gear Stephenson [2]
Valve typeSlide valves
Performance figures
Tractive effort 17,385 lbf (77.33 kN) [3]
Career
Operators
Class
  • GCR: 11B
  • LNER: D9
Numbers
  • GCR: 1013-1042, 104–113
  • LNER: 6013–6042, 5104-5113 [4]
Nicknames"Pom-Pom Bogies" [5]
Withdrawn1913–1927 [4]
DispositionRebuilt to GCR class 11D [6]

Although overshadowed by the later and more famous steam locomotives that John G. Robinson would go on to design, the Great Central Railway Class 11B 4-4-0 Express Passenger engines were a successful class which totalled 40. [1] Built from 1901 to 1903, in later rebuilt form as 11D, some 11Bs would last in service until 1950. [7] Railwaymen continued to refer to the class as "11B" even after all were rebuilt to 11D. [5] Being contemporary with and to some extent the 4-4-0 version of Robinson's much more numerous 0-6-0 goods class 9J, which were known as "Pom-Poms", the 11Bs acquired the nickname "Pom-Pom Bogies". [5] The London & North Eastern Railway classified the 11Bs, along with their 11C and 11D rebuilds, as Class D9. [2]

Contents

Origins

When John G. Robinson took up the reins at Gorton there was a serious and immediate shortage of suitable locomotives. [8] Part of the requirement was for express passenger engines for the newly completed London Extension. Pollitt's locomotives of class 11 were performing satisfactorily but the piston-valved 11A 4-4-0s, intended for use on Marylebone expresses had been problematic. [1] There were also some previously ordered 4-2-2 'singles' being delivered, but Robinson decided that more powerful locomotives were required. [9]

The 11Bs therefore emerged as a robust and substantially enlarged evolution of GCR Class 11, with the then-conventional slide valves. [1] Gorton was busy at the time and the engines were needed urgently, so outside builders (Sharp, Stewart and Vulcan Foundry) were used. [1] [9] Delivery was rapid and 25 were in service by May 1902, 30 by March 1903 and all 40 by June 1904. [7]

Service history

As intended the 11Bs displaced Pollitt's 11As on the London Extension services, with engines shedded at Leicester, Gorton and Neasden. [1]

The 11Bs were partially displaced in their turn by the arrival of Robinson's "Atlantics", a process largely completed by the arrival of the "Director" 4-4-0s. [6] 11Bs then found uses on the older parts of the Great Central Railway network, based especially in Sheffield and Annesley, with others scattered elsewhere. [6]

By the Grouping, increasing numbers of the engines had been rebuilt with larger superheated boilers and piston valves becoming GCR Class 11D. The last conversion was completed in 1927. [6]

Accidents and incidents

On 23 December 1904, locomotive No. 1040 was hauling an express passenger train which was derailed at Aylesbury, Buckinghamshire due to excessive speed on a curve. Four people were killed. [10]

Performance

The performance of these engines was very much overshadowed by later Robinson engines such as classes 8B, 11E, and 11F. Nevertheless, they must have been at least reasonably satisfactory from the start to merit the additional order of 10 in 1904. [1] Hancox records them as reliable and capable of working nine bogie coaches. [3] London Extension schedules from 1905, at which time the 11Bs were still working some of the best trains, needed average speeds of nearly 60 mph (97 km/h) [1] and to keep these times much faster running must have been required. Even with relatively light loads this implies at the least a free-running locomotive. Their long lives (especially in later rebuilt form) suggest robust and trouble-free construction.

However effective they were, Robinson clearly identified a need for larger express passenger locomotives, with the 8B "Jersey Lilies" appearing in 1903, [11] very soon after the 11Bs were delivered. There were also three distinct attempts to improve the 11Bs through rebuilding, creating 11C and eventually 11D (see below).

Naming

Four of the class were given names, although strictly speaking only one - 1014 - carried a name when still class 11B:

Year NamedLoco NumberNameNamed AfterNotes
19021014'Sir Alexander' Sir Alexander Henderson, then newly created Baronet, director of the GCR Name removed in 1913 on further ennoblement of Sir Alexander, who then became an 11E. [1] [12]
1907104'Queen Alexandra' Queen Alexandra, consort of King Edward VII Named on rebuilding to 11C [6]
1911110'King George V' King George V, successor to King Edward VII Rebuilt to 11C prior to receiving its name [6]
19131021'Queen Mary' Queen Mary, queen consort of King George V Named in the course of rebuilding as the pioneer 11D. [6]

The nature of these titles demonstrates the high status that the engines enjoyed at the time they were named.

Modifications

Class 11B

As built, all 40 had cylinders incorporating slide valves; they also had boilers of 4 feet 9 inches (1.45 m) diameter, with fireboxes 7 feet 0 inches (2.13 m) long; they operated using saturated steam (i.e. the boilers did not have superheaters). These locomotives formed GCR Class 11B. [13] The 11Bs were little changed from introduction until rebuilding as the superheated 11D starting with No. 1021 in 1913, [6] except for two prior attempts to upgrade the class. The first was fitting of larger saturated boilers and modified pistons[ clarification needed ] to Nos. 104 and 110 creating GCR Class 11C in 1907, apparently without significant success. [6]

Class 11C

Two locomotives, nos. 104 and 110, were rebuilt in 1907 with larger boilers: these were 5 feet 0 inches (1.52 m) diameter, with fireboxes 8 feet 6 inches (2.59 m) long; again, they were saturated, and these rebuilds were reclassified 11C. No. 110 lost its large boiler in August 1918, receiving a normal 11B boiler in replacement. The large boiler which had been removed was then fitted to no. 113 in October 1918, which was also given piston valves at the same time. Nos. 104 & 113 were rebuilt to class 11D in 1923. [14]

Class 11D

In 1909, no. 1026 was given a boiler of the same diameter as the 11C rebuilds, but with the same firebox length as the 11B class. It also received new cylinders, incorporating piston valves. This boiler was saturated, but from 1913 further boilers of this size, which incorporated superheaters, were fitted to the 11B class, each of which was then reclassified 11D. No. 1026 was so rebuilt in 1914, its previous boiler then being transferred to no. 105; it was removed again in 1916 when no. 105 received a normal 11B boiler. All the rebuilds were given piston valves at the same time as the large boilers, apart from five locomotives (1027/31/42, 112/3), which had already received piston valves anything from two to six years beforehand; and no. 105, which retained slide valves when first given a large boiler, receiving piston valves when fitted with a superheated boiler in 1923. The process of rebuilding to class 11D was completed in January 1927, by which time the GCR had become part of the LNER, which placed all 40 in class D9. [6] [15]

The first D9 was withdrawn by the LNER in 1939 and 26 remained in service on nationalization of the railways in 1948, mainly in operation on the ex Cheshire Lines Committee routes. The last example was retired from service in 1950. [16]

Models

In 1904 Bassett-Lowke produced a Gauge 1 model of an 11B, complete with appropriate coaches, in association with a Great Central Railway marketing initiative. [12] The engine represented was No. 1014 'Sir Alexander'.

Related Research Articles

John George Robinson CBE, was an English railway engineer, and was chief mechanical engineer of the Great Central Railway from 1900 to 1922.

<span class="mw-page-title-main">Caprotti valve gear</span>

The Caprotti valve gear is a type of steam engine valve gear invented in the early 1920s by Italian architect and engineer Arturo Caprotti. It uses camshafts and poppet valves rather than the piston valves used in other valve gear. While basing his design on automotive valves, Caprotti made several significant departures from this design to adapt the valves for steam. Having agreed a joint-venture with Worcester-based engineering company Heenan & Froude from 1938, Heenan & Froude fully acquired Caprotti post-World War II in 1947.

<span class="mw-page-title-main">GCR Class 8K</span>

The Great Central Railway (GCR) Class 8K 2-8-0 is a class of steam locomotive designed for heavy freight. Introduced in 1911, and designed by John G. Robinson, 126 were built for the GCR prior to the First World War. Including wartime construction for the British Army ROD and the post-war GCR Class 8M, the class and its derivatives totalled 666 locomotives.

<span class="mw-page-title-main">LNER Class O4</span>

The London and North Eastern Railway (LNER) Class O4 initially consisted of the 131 ex-Great Central Railway (GCR) Class 8K 2-8-0 steam locomotives acquired on grouping in 1923. The engines were designed by John G. Robinson and built at the GCR's Gorton Locomotive Works, Manchester.

<span class="mw-page-title-main">GER Class S69</span>

The Great Eastern Railway (GER) Class S69, also known as 1500 Class, and later classified B12 by the London and North Eastern Railway (LNER) is a class of 4-6-0 steam locomotive designed to haul express passenger trains from London Liverpool Street station along the Great Eastern Main Line. Originally they were designed by S. D. Holden, but were much rebuilt, resulting in several subclasses.

<span class="mw-page-title-main">GER Class L77</span>

The GER Class L77, LNER Class N7, is a class of 0-6-2T steam locomotives. They were designed by Alfred John Hill of the Great Eastern Railway and introduced in 1915. The design was perpetuated by Nigel Gresley of the LNER after the 1923 grouping. 134 were built and one example is preserved.

<span class="mw-page-title-main">LNER Class U1</span>

The London and North Eastern Railway Class U1 was a solitary 2-8-0+0-8-2 Garratt locomotive designed for banking coal trains over the Worsborough Bank, a steeply graded line in South Yorkshire and part of the Woodhead Route. It was both the longest and the most powerful steam locomotive ever to run in Britain. It was built in 1925 with the motion at each end being based on an existing 2-8-0 design. The original number was 2395, and it was renumbered 9999 in March 1946, and then 69999 after nationalisation in 1948, although it retained its cab-side plate bearing its original number throughout its life. The locomotive ran for some time as an oil burner, and was tried out on the Lickey Incline in 1949–1950 and again, after the electrification of its home line, in 1955. These trials were unsuccessful, and so the locomotive was withdrawn in 1955 and scrapped.

<span class="mw-page-title-main">GNR Class C1 (large boiler)</span> Type of locomotive

The Great Northern Railway (GNR) Class C1 is a type of 4-4-2 steam locomotive. One, ex GNR 251, survives in preservation. Much like their small boiler cousins, they were capable of reaching speeds of up to 90 mph (145 km/h). They were also known as Large Atlantics.

<span class="mw-page-title-main">GER Class G58</span>

The GER Class G58 is a class of 0-6-0 steam tender locomotives designed by James Holden for the Great Eastern Railway in England. The class consisted partly of new locomotives built from 1905 to 1911 and partly of rebuilds of the earlier GER Class F48 built from 1900 to 1903. The rebuilding started under GER auspices from 1921 and was continued by the London and North Eastern Railway (LNER) after grouping in 1923.

<span class="mw-page-title-main">GCR Class 1</span>

The GCR Class 1 was a class of steam locomotives designed by John G. Robinson for the Great Central Railway, and introduced to service between December 1912 and 1913. In the 1923 grouping, they all passed to the London and North Eastern Railway which placed them in class B2. Their classification was changed to B19 in 1945, and all had been retired by the end of 1947.

The Midland Railway Johnson 0-6-0 were a class of locomotives serving Britain's Midland Railway system in the late 19th and early 20th centuries. Between 1875 and 1908 the Midland Railway, under the control of locomotive superintendents Samuel Waite Johnson and Richard Deeley, ordered 935 goods tender engines of 0-6-0 type, both from the railway's own shops at Derby and various external suppliers. Although there were many variations between different batches both as delivered and as successively rebuilt, all 935 can be regarded as a single series, one of the largest classes of engine on Britain's railways. The locomotives served as late as 1964, but none of them now survive.

<span class="mw-page-title-main">GCR Class 8A</span>

The Great Central Railway (GCR) Class 8A was a class of 0-8-0 steam locomotive built between 1902 and 1911 for handling heavy coal trains over the Pennines. They all passed to the LNER in 1923, who redesignated them Class Q4. They were withdrawn from service between 1934 and 1951.

<span class="mw-page-title-main">GCR Class 11E</span>

The GCR Class 11E was a type of 4-4-0 steam locomotive used by the Great Central Railway for express passenger services. Ten were built in the railway's own workshops at Gorton, Manchester during 1913; they remained in service until the mid-1950s.

<span class="mw-page-title-main">GCR Class 9K</span> Classes of British 4-4-2T steam locomotives

The Great Central Railway 9K and 9L classes were two related classes of 4-4-2T Atlantic steam locomotives. They were both intended for suburban passenger services. After the 1923 Grouping, they served the LNER as classes C13 and C14.

<span class="mw-page-title-main">GCR Class 8C</span>

The GCR Class 8C was a class of a pair of 4-6-0 locomotives built for the Great Central Railway in 1903–1904 by Beyer, Peacock and Company. They passed to the London and North Eastern Railway at the 1923 grouping and received the classification B1 They were reclassified B18 in 1943 and both were retired in 1947.

<span class="mw-page-title-main">GCR Class 8B</span>

The GCR Class 8B was a class of 27 two-cylinder steam locomotives of the 4-4-2 wheel arrangement built between 1903 and 1906 for the Great Central Railway. They were nicknamed "Jersey Lillies" after the famous music star Lillie Langtry.

GCR Class 8G was a class of 10 two-cylinder steam locomotives of the 4-6-0 wheel arrangement built in 1906 for the Great Central Railway.

<span class="mw-page-title-main">GCR Class 9P</span>

GCR Class 9P was a design of four-cylinder steam locomotive of the 4-6-0 wheel arrangement built for hauling express passenger trains on the Great Central Railway in England. A total of six were built: one in 1917, and five in 1920. They were sometimes known as the Lord Faringdon class, from the name of the first one built.

<span class="mw-page-title-main">GCR Class 8F</span>

The GCR Class 8F was a class of ten 4-6-0 locomotives built for the Great Central Railway in 1906 by Beyer, Peacock and Company to the design of John G. Robinson for working fast goods and fish trains. They passed to the London and North Eastern Railway at the 1923 grouping and received the classification 'B4'.

<span class="mw-page-title-main">NER Class Z</span> Class of 50 British 4-4-2 locomotives, later LNER class C7

The NER Class Z was an Atlantic class of locomotives designed by Vincent Raven. It was introduced in 1911.

References

Notes
  1. 1 2 3 4 5 6 7 8 9 10 11 12 Smith 1993, p. 4
  2. 1 2 3 4 5 6 Smith 1993, p. 8
  3. 1 2 3 4 5 6 7 Hancox 1995, p. 9
  4. 1 2 Smith 1993, p. 32
  5. 1 2 3 Hancox 1995, p. 2
  6. 1 2 3 4 5 6 7 8 9 10 Smith 1993, p. 5
  7. 1 2 Smith 1993 , p. 36
  8. Hughes 1988 , p. 30
  9. 1 2 Hughes 1988 , pp. 30–31
  10. Trevena, Arthur (1981). Trains in Trouble: Vol. 2. Redruth: Atlantic Books. p. 22. ISBN   0-906899-03-6.
  11. Hancox 1995 , p. 12
  12. 1 2 Hancox 1995 , p. 19
  13. Boddy et al. 1981 , pp. 62–63
  14. Boddy et al. 1981 , pp. 62, 64–65, 75
  15. Boddy et al. 1981 , pp. 62–63, 65, 74–75
  16. Casserley, 1974, p. 22
Bibliography