GER Class T19

Last updated

GER Class T19
2-4-0 GER 760 Petrolea.jpg
Oil-burning T19 No. 760 named Petrolea. The name was removed when it was rebuilt circa 1902–1904
Type and origin
Power typeSteam
Designer James Holden
Builder Stratford Works
Build date1886-1897
Total produced110
Specifications
Configuration:
   Whyte 2-4-0
   UIC 1B n2
Gauge 4 ft 8+12 in (1,435 mm)
Leading dia. 4 ft 0 in (1.219 m)
Driver dia.7 ft 0 in (2.134 m)
Wheelbase 36 ft 7 in (11.15 m)
Length48 ft 2 in (14.68 m) over buffers
Adhesive weight 27 long tons 11 cwt (61,700 lb or 28 t)
Loco weight42 long tons 0 cwt (94,100 lb or 42.7 t)
Fuel typeCoal, some converted to fuel oil
Firebox:
  Grate area18 sq ft (1.7 m2)
Boiler pressure160 lbf/in2 (1.10 MPa)
Heating surface1,199.5 sq ft (111.44 m2)
Cylinders Two, inside
Cylinder size 18 in × 24 in (457 mm × 610 mm)
Performance figures
Tractive effort 12,590 lbf (56.00 kN)
Career
Operators Great Eastern Railway
NicknamesStandards
Withdrawn1902–1908 (for rebuilding)
1908–1913 (for scrapping)
Disposition29 scrapped,
21 rebuilt as "Humpty-Dumpties",
60 rebuilt as 4-4-0

The GER Class T19 was a class of 2-4-0 steam tender locomotives designed by James Holden for the Great Eastern Railway. Some were later rebuilt with larger boilers while others were rebuilt with both larger boilers and a 4-4-0 wheel arrangement. Unusually, both the 2-4-0 and 4-4-0 rebuilds were classified as GER Class T19 Rebuilt. All the 2-4-0s had been withdrawn by 1920 so only the 4-4-0s passed to the London and North Eastern Railway in 1923 and these became the LNER Class D13.

Contents

Standard 2-4-0s

The T19s was similar to the Worsdell Class G14, but had a slightly larger boiler. One hundred and ten locomotives were constructed. They had 18-by-24-inch (457 mm × 610 mm) cylinders and the last ten had 160-pound-force-per-square-inch (1.10 MPa) boilers, but the remainder were gradually fitted with two-ring boilers.

Table of orders and numbers [1]
YearOrder No.BuilderQuantityGER Nos.Notes
1886–87T19Stratford Works10710–719
1888S20Stratford Works10720–729
1888F21Stratford Works10730–739
1889O22Stratford Works10740–749
1889R22Stratford Works10750–759
1890T24Stratford Works10760–769
1892S29Stratford Works10700–709
1892V29Stratford Works10781–790renumbered 770–779 in July 1904
1893D32Stratford Works101010–1019
1895H35Stratford Works101020–1029
1897M39Stratford Works101030–1039

No. 758 was fitted with an extended smokebox in 1900. Oil burning apparatus was fitted to No. 712 and 759–767. No. 760 was named Petrolea. Tenders with water scoops were fitted to Nos. 762–767 and 1030–1039 to enable the Cromer expresses to run non-stop from Liverpool Street to North Walsham from 1 July 1897. Water troughs were installed at Halifax Junction, Ipswich and at Tivetshall St. Mary.

Royal trains

Oil-burning T19 No. 761, one of the class frequently used for powering Royal trains. It was not rebuilt, being withdrawn in 1908. 2-4-0 GER T19 class 761.jpg
Oil-burning T19 No. 761, one of the class frequently used for powering Royal trains. It was not rebuilt, being withdrawn in 1908.

No. 755 hauled the funeral train for the late Prince Albert Victor, Duke of Clarence and Avondale from King's Lynn to Windsor on 28 January 1892. No. 761 hauled the honeymoon train for the late prince's brother and former fiancée the Duke and Duchess of York (later George V and Queen Mary) from Liverpool Street to King's Lynn on 6 July 1893.

Eighty-one were rebuilt at the beginning of the 20th century. The twenty-nine not rebuilt were scrapped between 1908 and 1913.

Table of withdrawals [2]
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive Numbers
1908298711, 723, 746, 749, 754, 758, 761, 1024
19092110714, 716, 720–722, 753, 701, 703, 773, 1038
1910117726, 736, 752, 755, 757, 709, 1019
191143740, 759, 764
191311768

"Humpty Dumpty" 2-4-0s

GER Class T19R
"Humpty Dumpty"
Type and origin
Only differences from T19 above are shown
Power typeSteam
Rebuilder Stratford Works
Rebuild date1902–1904
Number rebuilt21
Specifications
Adhesive weight 30 long tons 12 cwt (68,500 lb or 31.1 t)
Loco weight45 long tons 9 cwt (101,800 lb or 46.2 t)
Firebox:
  Grate area21.6 sq ft (2.01 m2)
Boiler Belpaire
Boiler pressure180 lbf/in2 (1.24 MPa)
Heating surface1,476.2 sq ft (137.14 m2)
Performance figures
Tractive effort 14,162 lbf (63.00 kN)
Career
Operators Great Eastern Railway
Class T19R
NicknamesHumpty Dumpty
Withdrawn1913–1920

Between 1902 and 1904, twenty-nine were rebuilt with new boilers with Belpaire fireboxes. With their small tenders, and a dome well-forward on the first ring, they looked front-heavy, and gained the nickname Humpty Dumpties . In fact they were so front heavy that they were never considered for superheating. [2] They were withdrawn between 1913 and 1920.

Table of withdrawals [3]
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive Numbers
1913216743, 762, 763, 769, 1022, 1034
1914155724, 760, 770, 774, 1011
1915105727, 750, 1010, 1014, 1017
191953725, 702, 771
192022776, 778

4-4-0s

GER T19R 4-4-0
LNER Class D13
Beccles railway station.jpg
Type and origin
Only differences from T19 above are shown
Power typeSteam
Rebuilder Stratford Works
Rebuild date1905–1908
Number rebuilt60
Specifications
Configuration:
   Whyte 4-4-0
   UIC 2′B n2, later 2′B h2
Leading dia. 3 ft 1 in (0.940 m)
Wheelbase 41 ft 5+12 in (12.64 m)
Length50 ft 7+12 in (15.43 m)
Adhesive weight 32 long tons 14 cwt (73,200 lb or 33.2 t)
Loco weight48 long tons 6 cwt (108,200 lb or 49.1 t)
Firebox:
  Grate area21.6 sq ft (2.01 m2)
Boiler pressure180 lbf/in2 (1.24 MPa)
Heating surface1,297.3 sq ft (120.52 m2)
Performance figures
Tractive effort 14,163 lbf (63.00 kN)
Career
Operators GER  » LNER
Class GER: T19R
LNER: D13
Withdrawn1922–1944

Between 1905 and 1908 sixty were rebuilt as 4-4-0 tender engines with the same new Belpaire boilers. The first ten re-used the bogies from Class G16 [4] 4-4-0s, while the other re-used the rear bogie from withdrawn Class E10 [5] 0-4-4T locomotives. [6] Superheaters began to be fitted from 1913, [7] and all those still in service in 1926 had been so fitted.

Two were withdrawn in 1922, and the remaining fifty-eight passed to the LNER at the 1923 grouping. The LNER Classified them as Class D13, and added 7000 to their Great Eastern number. They were initially repainted in the LNER passenger green livery, but from 1928, repaints were in black with red lining. [7] Withdrawals continued steadily, until in 1944, the last survivor was withdrawn. [8] See also (Ahrons 1951).

Table of withdrawals [9]
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive Numbers
1922602715, 747
19235817730
19255718018
19265627705, 8031
19275418033
19295317710
19305227717, 7765
19315087712, 7728, 7731, 7733, 7734, 7738, 7739, 7748
19324237719, 7735, 7704
19333967713, 7718, 7732, 7737, 7745, 7751
19343347767, 7777, 8015, 8037
19352997741, 7742, 7744, 7766, 7700, 7708, 7779, 8012, 8013
19362067729, 7775, 8020, 8021, 8027, 8032
19371447707, 8025, 8026, 8036
19381077756, 7706, 7772, 8016, 8028–8030
1943328023, 8035
1944118039

See also

Related Research Articles

<span class="mw-page-title-main">GWR 4100 Class</span> Class of 84 British 4-4-0 locomotives

The GWR 4100 Class was a class of steam locomotives in the Great Western Railway (GWR) of the United Kingdom.

<span class="mw-page-title-main">GER Class S69</span>

The Great Eastern Railway (GER) Class S69, also known as 1500 Class, and later classified B12 by the London and North Eastern Railway (LNER) is a class of 4-6-0 steam locomotive designed to haul express passenger trains from London Liverpool Street station along the Great Eastern Main Line. Originally they were designed by S. D. Holden, but were much rebuilt, resulting in several subclasses.

<span class="mw-page-title-main">GER Class A55</span>

The GER Class A55 or Decapod was an experimental steam locomotive with an 0-10-0T wheel arrangement designed by James Holden for the Great Eastern Railway. It was the first ten-coupled steam locomotive in Great Britain.

<span class="mw-page-title-main">GER Class L77</span>

The GER Class L77, LNER Class N7, is a class of 0-6-2T steam locomotives. They were designed by Alfred John Hill of the Great Eastern Railway and introduced in 1915. The design was perpetuated by Nigel Gresley of the LNER after the 1923 grouping. 134 were built and one example is preserved.

<span class="mw-page-title-main">GER Classes S46, D56 and H88</span>

The GER Classes S46, D56 and H88 were three classes of similar 4-4-0 steam locomotive designed by James Holden and A. J. Hill (H88) for the Great Eastern Railway.

<span class="mw-page-title-main">James Holden (locomotive engineer)</span>

James Holden was an English locomotive engineer.

The GER Class F48 was a class of sixty 0-6-0 steam tender locomotives designed by James Holden for the Great Eastern Railway in Great Britain. They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J16.

<span class="mw-page-title-main">GER Class G58</span>

The GER Class G58 is a class of 0-6-0 steam tender locomotives designed by James Holden for the Great Eastern Railway in England. The class consisted partly of new locomotives built from 1905 to 1911 and partly of rebuilds of the earlier GER Class F48 built from 1900 to 1903. The rebuilding started under GER auspices from 1921 and was continued by the London and North Eastern Railway (LNER) after grouping in 1923.

<span class="mw-page-title-main">GER Class T26</span>

The GER Class T26 was a class of one hundred 2-4-0 steam tender locomotives designed by James Holden for the Great Eastern Railway. At the 1923 grouping they all passed to the London and North Eastern Railway, who classified them E4. Eighteen survived into British Railways ownership in 1948, and the last was withdrawn in 1959, making them the last 2-4-0 tender locomotives at work in Britain. Their BR numbers were 62780–62797.

<span class="mw-page-title-main">GER Class T18</span>

The GER Class T18 was a class of fifty 0-6-0T steam locomotives designed by James Holden for the Great Eastern Railway. They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J66.

<span class="mw-page-title-main">GER Class D27</span>

The GER Class D27 was a class of 2-2-2 steam tender locomotives designed by James Holden for the Great Eastern Railway.

<span class="mw-page-title-main">GER Class R24</span>

The GER Class R24 was a class of 0-6-0T steams designed by James Holden for the Great Eastern Railway (GER). They passed to the London and North Eastern Railway at the grouping in 1923 and received the LNER classification J67. Some R24s were rebuilt with higher boiler pressure in which form they were similar to the later Class S56. The rebuilt R24s, together with the S56s, were classified J69 by the LNER.

<span class="mw-page-title-main">GER Class 209</span> 0-4-0 saddle tank locomotive

The GER Class 209 was a class of 0-4-0 saddle tank steam locomotives of the Great Eastern Railway. These locomotives were similar to the NBR G Class but had flat-topped, instead of round-topped, tanks. A total of eight were built – four by Neilson and Company in 1874 and four more by the GER's Stratford Works between 1897 and 1903.

<span class="mw-page-title-main">M&GN Class C</span>

The M&GN Class C was a class of 4-4-0 steam tender locomotives of the Midland and Great Northern Joint Railway.

The Midland Railway Johnson 0-6-0 were a class of locomotives serving Britain's Midland Railway system in the late 19th and early 20th centuries. Between 1875 and 1908 the Midland Railway, under the control of locomotive superintendents Samuel Waite Johnson and Richard Deeley, ordered 935 goods tender engines of 0-6-0 type, both from the railway's own shops at Derby and various external suppliers. Although there were many variations between different batches both as delivered and as successively rebuilt, all 935 can be regarded as a single series, one of the largest classes of engine on Britain's railways. The locomotives served as late as 1964, but none of them now survive.

<span class="mw-page-title-main">GER Class E72</span>

The GER Class E72 was a class of ten 0-6-0 steam locomotives designed by S. D. Holden for the Great Eastern Railway. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J18.

<span class="mw-page-title-main">GER Class T77</span>

The GER Class T77 was a class of twenty-five 0-6-0 steam locomotives designed by A. J. Hill for the Great Eastern Railway. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J19.

<span class="mw-page-title-main">GER Class D81</span>

The GER Class D81 was a class of twenty-five 0-6-0 steam locomotives designed by A. J. Hill for the Great Eastern Railway. The all passed to the London and North Eastern Railway at the 1923 grouping and received the classification J20.

<span class="mw-page-title-main">GER Class C32</span>

The GER Class C32 was a class of fifty 2-4-2T steam locomotives designed by James Holden and built by the company's Stratford Works between 1892 and 1902. They all passed to the London and North Eastern Railway at the 1923 grouping and received the classification F3.

<span class="mw-page-title-main">GNR Classes D2 and D3</span>

The GNR Classes D2 and D3 were two classes of 51 4-4-0 steam locomotives designed by Henry Ivatt for the Great Northern Railway (GNR). They were the first 4-4-0s to be introduced by the GNR, and Ivatt's first original design for the railway as well.

References

  1. Aldrich 1969 , p. 61
  2. 1 2 3 Aldrich 1969 , p. 63
  3. Fry et al. 1981 , p. 9
  4. "G16 Class 4-4-0 1884-1885". www.gersociety.org.uk. Retrieved 26 April 2019.
  5. "E10 Class 0-4-4T 1878-1883". www.gersociety.org.uk. Retrieved 26 April 2019.
  6. Marsden, Robert. "The Holden Class D13 (GER T19 Rebuilt) 4-4-0 Locomotives". www.lner.info. Retrieved 28 January 2019.
  7. 1 2 Aldrich 1969 , p. 64
  8. Fry et al. 1981 , pp. 14–16
  9. Aldrich 1969 , pp. 135, 136, 139