Production-level manufacturing was started in March 1984 and the first customer deliveries were made in October 1984[4]
Early versions were hand-laid, while later ones were produced using a closed-mold process.[4]
The company specifically planned that the Laser 28 would be the sole keelboat offered and did not intend to produce a graduated line of boats, unlike other manufacturers at that time.[4]
Development
Laser 28
The Laser 28's design started in 1978, following the success of the Laser dinghy, with the intention to produce a keelboat equivalent, for the Laser sailors who would outgrow the Laser, just need a keelboat as they aged, or for family cruising and racing.[5]
In 1980 Ian Bruce, president of Performance Sailcraft decided to take the boat design away from that company to reduce commercial pressures on the design team. He formed Bruce Yacht R&D Inc (BYRD) and teamed with designer Bruce Farr and a group headed up by the president of the International Laser Class Association, Tim Coventry.[5]
The Laser 28 was Farr's 91st boat design. The project development team included Performance Sailcraft's Ian Bruce, Tim Coventry President of the International Laser Class Association, experienced sailor Peter Hicks, Norman Frost as plastics engineer and Piers Phipps as project financial advisor. Hans Fogh designed the sails, as he had done for the Laser dinghy.[1][5]
The boat project had four design goals. First, that the boat should be a strict one-design in the same vein as the Laser dinghy, with all boats produced the same with class rules that prohibited any changes to the boat, so that the competition would be between sailing skills and not the ability to pay for improvements. Second, that the design should have outstanding performance, unhampered by adherence to any rule structure, such as the International Offshore Rule, to ensure a long life as a competitive boat. Third, that the boat be a quality product, using the best of available technology. Fourth, that the boat represent a good value for the monetary outlay, "the intention being to produce a 28 foot yacht with a performance of a 35 foot yacht at the price of a 25 foot yacht."[5]
Two prototypes were built and the first sailed in the early summer of 1981 in Falmouth, England, with the second in the water that autumn. Originally fitted with a large genoa foresail the second prototype used a 108% "lapper" jib, that proved superior in winds over 5kn (9km/h) and was easier to handle by short-handed crews, as well as cheaper to produce.[5]
The prototypes were tested in severe conditions, including broaching and intentional knockdowns with the spinnaker flying, in 35 to 40kn (65 to 74km/h) winds that left the cockpit dry and with no equipment failures.[5]
With $1,000,000 invested, to get the design from testing to production, a new firm was created by financial consultant Piers Phipps, Precis Ninety Nine Limited. The design was licensed to Performance Sailcraft to produce.[5]
Design
Laser 28
The Laser 28 is a small recreational keelboat, built predominantly of fibreglass, with a Termanto PVC foam hull and deck. It has a fractionalsloop rig and a spinnaker, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 3,950lb (1,792kg) and carries 1,500lb (680kg) of lead ballast. The boat has a draft of 4.98ft (1.52m) with the standard fin keel.[1]
The prototypes were fitted with Honda four-stroke gasoline engines, coupled to a Volvosaildrive, but there was resistance to using gasoline engines in Europe, due to the fire hazard. The production boats were therefore delivered with a Bukh 8SME diesel engine of 8.2hp (6kW).[1][5]
Production sails include 242sqft (22.5m2)mainsail, a 106% "lapper" jib of 162sqft (15.1m2), a working jib of 123sqft (11.4m2), a #1 spinnaker of 610sqft (57m2), a #2 spinnaker of 670sqft (62m2) and an optional genoa of 230sqft (21m2).[5]
The boat has a hull speed of 6.51kn (12.06km/h)[6] and a PHRF racing average handicap of 123 with a high of 117 and low of 132.[4]
Operational history
Laser 28
The Laser 28 was not sold though the existing Performance Sailcraft company dealer network, but rather through direct representatives who owned and sailed Laser 28s and organized events for them.[4]
Robert Dunkley of Nassau, Bahamas, took delivery of his Laser 28 in Fort Lauderdale, Florida and sailed directly to Nassau with a crew of three, the same day. They sailed in 30kn (56km/h) north winds in the Gulf Stream and encountered 10 to 15ft (3.0 to 4.6m) waves en route, but completed the voyage without incident, although the rigging required tightening at destination.[4]
Judy and Frank Button from Vancouver, British Columbia won the IYC winter series in their Laser 28, for the fourth time in a row.[4]
The company's San Francisco Bay representative, Paul Kaplan, sailed his Laser 28 single handed on its fourth outing and won first place in the class and first overall in a 38 boat fleet in the Singlehanded Sailing Society’s Three Bridge Fiasco Race. Kaplan's wife, Chris, sailed the boat with an all-female crew to third place in the Women’s Racing Association winter series.[4]
The Laser is a class of single-handed, one-design sailing dinghies using a common hull design with three interchangeable rigs of different sail areas, appropriate to a given combination of wind strength and crew weight. Bruce Kirby designed the Laser in 1970 with an emphasis on simplicity and performance.
The Flying Dutchman is a Dutch planing sailing dinghy that was designed by Uus Van Essen and Conrad Gülcher as a high performance, one design racer and first built in 1951.
The J/22 is an American trailerable sailboat that was designed by Rod Johnstone as a one-design racer and first built in 1983.
Hobie Cat is a company that manufactures sailing catamarans, surfboards, sailboats, kayaks, stand-up paddle boards, and pedalboards as the Hobie Cat Company. It was founded in 1961 by Hobart Alter, who originally manufactured surfboards. Its line of products has included more than twenty sailing craft, plus a variety of other watercraft.
The Laser 2 is a double-handed version of the popular Laser one-design class of small sailing dinghy. It is a quick, planing dinghy that differs from the Laser in that it has a jib, symmetric spinnaker and a single trapeze for the crew in the racing "Regatta" version. It was designed by New Zealander Frank Bethwaite and was first launched as a product in Australia then North America in 1979 and in Europe in 1980.
The Buccaneer 18, also called the Buccaneer dinghy and the Gloucester 18, is an American planing sailing dinghy that was designed in 1966 by Rod Macalpine-Downie and Dick Gibbs as a one-design racer and day sailer. The prototype was first shown in 1967 at Yachting's "One of a Kind" Regatta, in which it placed second.
The Fireball is a British sailing dinghy that was designed by Peter Milne as a one-design racer and first built in 1962.
The Shields, also called the Shields 30 and the Shields One-Design, is an American trailerable sailboat that was designed by Olin Stephens of Sparkman & Stephens as a one design racer and first built in 1962.
The Sonar is a one design trailerable racing sailboat that was designed by Canadian naval architect Bruce Kirby and first built in 1980.
The A Scow is an American scow-hulled sailing dinghy that was designed by John O. Johnson as a racer and first built in 1901.
The International 110 is an American sailboat that was designed by C. Raymond Hunt as a one-design racer and first built in 1939.
The Rhodes 19 is an American trailerable day sailer or sailing dinghy, that was designed by Philip Rhodes as a one-design racer and first built in 1958.
A trailer sailer is a type of sailboat that has been designed to be easily transported using a boat trailer towed by an automobile. They are generally larger than a sailing dinghy. Trailer sailers include day sailers and small cabin cruisers, suitable for living on.
The Windmill is an American sailing dinghy that was designed by Clark Mills as a one-design racer and first built in 1953.
The Impulse is an Australian sailing dinghy that was designed by Arthur Caldwell as a one-design racer and first built in 1975.
The Martin 16 is a Canadian trailerable sailboat, that was designed by Don Martin of Vancouver, British Columbia, specifically as a boat for disabled sailors. It was first built in 1995.
The Topper Topaz is a British single-handed or two-handed sailing dinghy that was designed as a beginner and intermediate racer.
The Impulse 21, also called the Impulse Eagle, is an American trailerable sailboat that was designed by William E. Cook as a one-design racer and day sailer, It was first built in 1986.
The Archambault Coco is a French sailboat that was designed by Harlé - Mortain as a Classe Mini racer for racing in the Mini Transat 6.50. It was first built in 1985.
The Rhodes 18 is an American trailerable day sailer or sailing dinghy that was designed by Philip Rhodes in 1938 and first built in 1948. It is Rhodes' design #448.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
