 | This article needs additional citations for verification .(March 2024) |
Lima Engine is a Ford Motor Company automobile engine plant located in Lima, Ohio, United States.
| | This article needs additional citations for verification .(March 2024) |
Lima Engine is a Ford Motor Company automobile engine plant located in Lima, Ohio, United States.
The factory opened in 1957 as the site of production of Ford's MEL V8 for the Edsel car.
It subsequently produced six-cylinder engines (the 170/200/250 family), the 385-series 370/429/460 big-block V8 engines, and the 2.3/2.5 L HSC/HSO pushrod four-cylinder engines for the Ford Tempo, Mercury Topaz, and Ford Taurus.
The plant also produced the namesake Lima 2.0/2.3/2.5 L OHC four-cylinder used in the Ford Pinto, Fairmont, Mustang, Thunderbird, Aerostar, Ranger, Mercury Capri, Mercury Cougar, Merkur XR4Ti, and 1993–2006 Mazda B-Series B2300/B2500 compact trucks.
The Ford Explorer is a range of SUVs manufactured by Ford Motor Company since the 1991 model year. The first five-door SUV produced by Ford, the Explorer was introduced as a replacement for the three-door Bronco II. As with the Ford Ranger, the model line derives its name from a trim package previously offered on Ford F-Series pickup trucks. As of 2020, the Explorer became the best-selling SUV of all time in the American market.
The Ford Escape is a compact crossover SUV manufactured and marketed by Ford Motor Company since the 2001 model year. The first Ford SUV derived from a car platform, the Escape fell below the Ford Explorer in size; the Escape is currently sized between the Ford EcoSport and Ford Edge. The 2004 Ford Escape Hybrid was the first hybrid-electric vehicle from Ford, and the first hybrid produced as an SUV.
The Mazda Tribute is a compact SUV made by Japanese automaker Mazda from 2000 to 2011. It was jointly developed with Ford Motor Company and based on the front-wheel drive Mazda 626 platform, which was in turn the basis for the similar Ford Escape on the CD2 platform. The Tribute was priced below the Ford Escape and Mercury Mariner in Ford's CD2 SUV lineup.
The Jaguar AJ-8 is a compact DOHC V8 piston engine used in many Jaguar vehicles. It was the fourth new engine type in the history of the company. It was an in house design with work beginning before Ford's purchase of the company. In 1997 it replaced both designs previously available on Jaguar cars: the straight-6 Jaguar AJ6 engine, and the Jaguar V12 engine. It remained the only engine type available on Jaguar until 1999 with the launch of the S-Type, when the Jaguar AJ-V6 engine was added to the list. The AJ-V8 is available in displacements ranging from 3.2L to 5.0L, and a supercharged version is also produced. Ford Motor Company also used this engine in other cars, including the Lincoln LS and the 2002–2005 Ford Thunderbird, as well as in several Land Rovers, and the Aston Martin V8 Vantage.
The Jaguar AJ-V6 engine is a piston engine based on the Ford Duratec V6 engine. The Duratec V6 was originally a Porsche design, purchased by the Ford Motor Company with Cosworth finishing the engineering to suit Ford's needs. One notable addition is the use of variable valve timing, a feature also shared with Mazda's version of the engine. It is available in 2.1 L (2,099 cc), 2.5 L (2,495 cc) and 3.0 L (2,967 cc) displacements.
The Ford Vulcan is a 3.0 L V6 engine designed and built by the Ford Motor Company. It debuted in 1986 in the newly launched Ford Taurus. Ford went on to install the Vulcan V6 in a variety of car, van, and pickup truck models until the 2008 model year, after which production stopped.
The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.
The Ford Motor Company produced straight-six engines from 1906 until 1908 and from 1941 until 2016. In 1906, the first Ford straight-six was introduced in the Model K. The next was introduced in the 1941 Ford. Ford continued producing straight-six engines for use in its North American vehicles until 1996, when they were discontinued in favor of more compact V6 designs.
The AJD is a family of V6 and V8 turbodiesel engines with a clean-sheet architecture and variable valve timing developed by Ford of Europe for its then-subsidiaries Jaguar and Land Rover, as well as for its partner PSA Group working under the Gemini joint development and production agreement. It is called the AJD-V6 in the Jaguar and Land Rover vehicles and the DT17/DT20 by Citroën and Peugeot. The engines share the same bore/stroke ratio, with the V6 version displacing 2.7 L (2,720 cc) and the V8 version displacing 3.6 L (3,630 cc). The V6 and the V8 were launched in 2004 and 2006 respectively. The V6 engine meets the Euro IV emissions standards. A DT20 3.0 L (2,993 cc) was added in 2009 and is based on the DT17 2.7 L (2,720 cc). The V6 is used across many vehicles, from the Citroën C5 and C6, to the Land Rover Discovery, Range Rover, multiple cars in the Jaguar range, and also the Ford Territory and next gen Ford Ranger.
The Cyclone engine, also branded Duratec, is Ford Motor Company's latest DOHC family of gasoline V6 engines introduced in 2006. The Cyclone succeeds Ford's previous V6 engine families, including the Canadian built Ford Essex engine introduced in 1981, the Ford Vulcan engine introduced in 1985, the original Duratec V6 introduced in 1993, and the Ford Cologne V6 engine, whose design dates back to 1962. The first version of the Cyclone engine, a 3.5 L V6, appeared in the 2007 Ford Edge and the Lincoln-badged luxury variant, the Lincoln MKX, as well as the Lincoln MKZ. Mazda badges its versions of the Cyclone MZI as it did with its versions of the Duratec V6.
The Ford Duratec V6, is an aluminum DOHC V6 engine with a 60° bank angle introduced in 1993 with the Ford Mondeo. The primary engineering came from Porsche, who was developing this engine before selling the engineering to Ford, and Cosworth, who helped with cylinder head manufacturing. The Jaguar AJ-V6 engine is similar but adds variable valve timing.
Cleveland Engine is a Ford Motor Company engine manufacturing facility in Brook Park, Ohio, United States, a suburb of Cleveland. It consisted of two distinct plants until one was closed in 2012.
The sixth generation of the Ford Taurus is the final generation of the model range manufactured by Ford. Introduced for the 2010 model year, the sixth-generation Taurus is the second generation of the model line produced as a full-size car; it was the heaviest sedan sold under the Ford brand worldwide. While sharing its D3 chassis underpinnings with the previous generation, the sixth generation marked the first North American use of Kinetic Design design language.
EcoBoost is a series of turbocharged, direct-injection gasoline engines produced by Ford and originally co-developed by FEV Inc.. EcoBoost engines are designed to deliver power and torque consistent with those of larger-displacement naturally aspirated engines, while achieving up to 20% better fuel efficiency and 15% fewer greenhouse emissions, according to Ford. The manufacturer sees the EcoBoost technology as less costly and more versatile than further developing or expanding the use of hybrid and diesel engine technologies. EcoBoost engines are broadly available across the Ford vehicle lineup.
The Mazda L-series is a mid-sized inline 4-cylinder gasoline piston engine designed by Mazda as part of their MZR family, ranging in displacement from 1.8 to 2.5 liters. Introduced in 2001, it is the evolution of the cast-iron block F-engine. It was co-developed with Ford, who owned a controlling stake in Mazda at the time. Ford uses it as their 1.8 L to 2.5 L Duratec world engine and holds a license to develop engines based on the L-series in perpetuity.
Essex Engine Plant is a Ford factory located in Windsor, Ontario, Canada. It currently produces Ford's 5.0L V8 engine. The plant was built in 1981 to produce Ford's Essex V6 engine.
The thirteenth-generation Ford F-Series is a range of pickup trucks produced by Ford. Introduced for the 2015 model year, this generation of the F-Series is the first aluminum-intensive vehicle produced on a large scale by an American vehicle manufacturer. For the 2017 model year, the fourth-generation Super Duty line adopted the cab design of the F-150, consolidating the cab design for the first time on Ford light-duty trucks for the first time since the 1996 model year; the Super Duty trucks still retain separate bodywork and a heavier-duty frame.
The sixth-generation Ford Mustang (S550) is a pony car, manufactured and marketed by Ford from 2014 until 2023. In departure from prior Mustang models, the sixth-generation Mustang included fully independent rear suspension on all models, as well as an optional 2.3L EcoBoost turbocharged and direct injected four-cylinder engine. The sixth generation was introduced for model year 2015, marking the fiftieth anniversary since the Mustang's April 1964 introduction.
40°46′16.96″N84°5′6.69″W / 40.7713778°N 84.0851917°W
 | This article relating to an automotive factory or manufacturer facility is a stub. You can help Wikipedia by expanding it. |