The Merkur XR4Ti is a performance-oriented 3-door hatchback sold in North America from 1985 to 1989. A product of the Ford Motor Company, the car was a version of the European Ford Sierra adapted to U.S. regulations.[2] The XR4Ti project was championed by Ford vice president Bob Lutz.[3]
The Sierra was the successor to Ford of Europe's Cortina/Taunus, and was developed while Lutz was chairman of Ford's European operations.[4] Due to financial limitations the decision was made to keep the front-engine, rear-wheel-drive layout of its predecessor, and pursue improved fuel economy through advanced aerodynamics.[5] The Probe III design study unveiled at the 1981 Frankfurt Motor Show foreshadowed the direction Ford would take with the Sierra.[6] Responsibility for the Sierra design was handled by vice president for design Uwe Bahnsen and chief stylist Patrick le Quément.[5] The Sierra was released in Europe in September 1982, and the performance-oriented XR4i appeared in 1983, slotted into the lineup above the Fiesta-based XR2 and Escort-based XR3.[note 1][7]
Lutz spearheaded the plan to bring a version of the XR4i to North America to compete with sporty luxury imports like BMW.[8] Although modifications would be needed, his instructions were that the nature of the car not be compromised.[9] The XR4 for America would be turbocharged, adding a 'T' to its name while keeping the 'i' indicating a fuel injected engine, as in Europe. The 'Sierra' name was not used in North America, since it was already used by General Motors for their GMC C/K Sierra pickup truck, and sounded too similar to the Oldsmobile Cutlass Ciera.
With their own production lines occupied building Sierras for the European market, Ford contracted out assembly of the XR4Ti. Using body panels from Ford's factory in Genk, the cars were largely hand-built by Wilhelm Karmann GmbH in Rheine, Germany.[10] The XR4Ti was introduced at a starting price of US$16,503 (equivalent to $48,400in 2023).
Chief executive officer Pete Petersen decided that the car would be sold under the 'Merkur' brand name.[4] The name means 'Mercury' in German, and tied the new brand to the Lincoln-Mercury dealers through which the car would be sold. Initially, 800 Lincoln-Mercury dealers enrolled to also become Merkur dealers.[11]
Ford projected sales of 16,000 to 20,000 units per year. These targets were never met, although for the first two years they came close, with over 25,000 units sold. The car continued to struggle to establish its identity in the North American market, both with the public and with dealers.
An increasingly unfavorable dollar/Deutschmark exchange rate put upward pressure on price. By the late 1980s the XR4Ti was facing a redesign to comply with incoming safety regulations in the US. Ford dropped the 'Merkur' name in 1988, and began to refer to their two European imports by their model names only. Sales dropped off rapidly after 1986, so that in its last year fewer than 3,000 XR4Tis were sold. 1989 was the last year for the XR4Ti.[12]
The XR4Ti was the last vehicle imported by Ford into North America from Germany until 2016, when the Ford Focus RS was introduced.[13]
Body, chassis, suspension
Merkur XR4Ti
The XR4Ti kept the 3-door semi-notchback hatchback body style of the XR4i, including the European version's triple side-window profile and bi-plane rear spoiler. The lower body was clad in polycarbonate 'anti-abrasion' panels that were matte grey in the early cars.[14] The car's drag coefficient () was 0.328.[15]
The unibody chassis of the European Ford Sierra was modified to meet US safety requirements. The floorpan had reliefs added to accommodate catalytic converters. Side intrusion beams were added to the two doors, and the bumpers were stretched to meet US impact requirements.[4] To accommodate the engine for the US-spec car, the XR4Ti also received a taller hood.[16] Altogether 850 unique parts were developed for the car destined for the US and Canada, and these changes added approximately 280lb (127.0kg) to the weight.
Suspension was independent front and rear. The front suspension comprised Macpherson struts with concentric coil springs and lower lateral links triangulated by an anti-roll bar. The rear suspension used semi-trailing arms with coil springs ahead of the axle half-shafts, and shock absorbers behind. An anti-roll bar was also fitted at the rear. Spring rates were softened compared to the XR4i, based on feedback from Jackie Stewart, who had been brought in as both a development tester and spokesman for the car.[14] Steering was by a power-assisted rack and pinion with 3.6 turns lock-to-lock.[1] Brakes were 10.2in (259mm) disks in front and 10.0in (254mm) drums at rear. The car had a two-piece driveshaft and used a giubo as a torsional damper.
Engine and transmission
While the European XR4i was powered by a 2.8L version of the Ford Cologne V6 engine, the only engine offered in the XR4Ti was a turbochargedLimainline-four. This engine featured a cast-iron block, cast iron cylinder head with 2 valves per cylinder, and a single overhead cam driven by a timing belt. The XR4Ti engine also received a Garrett AiResearch turbocharger, fuel-injection and Ford's EEC-IVengine control unit. Built in Ford's TaubatéBrazil plant, the engine had a bore of 96.04mm (3.8in) and stroke of 79.4mm (3.1in) for a total displacement of 2,301cc (140.4cuin). A nearly identical engine was used in the 1983 Mustang Turbo GT and 1983 Thunderbird Turbo coupe. The XR4Ti did not have the intercooler found in the 1984 SVO Mustang or 1987-88 Thunderbird Turbo coupe. Engines in cars equipped with automatic transmissions had maximum boost set to 8 to 10psi (0.55 to 0.69bar) and produced 145hp (108kW). In cars with manual transmissions maximum boost was raised to 12 to 14psi (0.83 to 0.97bar) and the ECU programming was modified to allow the engine to produce 175hp (130kW).
The second-order vibrations produced by this large four cylinder engine had been noticeable when it was used in the turbocharged Thunderbird and Cougar models. To minimize these in the XR4Ti without resorting to extreme measures such as adding balance shafts, extensive work was done to reduce noise, vibration, and harshness (NVH) in the power-train.[17] The first measure taken to reduce NVH was to redesign the engine's external components, including the intake manifold, to increase the stiffness of the bracketing and lighten the components. The second measure was to reduce the amount of vibration transmitted to the body structure by using soft rubber engine mounts. Engine roll was controlled by wide-based mounting brackets, and engine movement due to bumps was limited by having the brackets attached to the body via hydraulic mounts.
The base transmission was a 5-speed manualFord Type 9 unit, while a Ford C3 3-speed automatic transmission was optional.
The XR4Ti arrived on the market with an extensive list of standard and optional equipment.
1985:
Standard equipment includes flush headlamps, variable ratio power steering, power mirrors, power disc brakes, nitrogen-pressurized shock-absorbers.[19]
Interior equipment includes air conditioning, a 60/40 folding rear seat, and an AM/FM stereo with integrated cassette player.
A manual transmission is standard and an automatic is optional. Most cars are equipped with manuals.[4]
Tires are Pirelli P6 195/60HR14 fitted to 14-inch 8-hole "phone dial" alloy wheels.
Other features, like power windows, power door locks, cruise control, leather seats, heated front seats, manual moon-roof, and metallic paint, are extra-cost options.
Many changes were made to the car over its five-year life.[20][21][22][23] These include:
1986:
A central high-mounted stop light is integrated into the lower rear wing.
Windows now roll down below sill edge.
Driver's side wiper airfoil is dropped.
Turbocharger outlet tube is now smooth.
Heater core is upgraded. (Late year change)
1987:
The XR4Ti inherits many upgrades from the European Sierra Mk.II chassis, including a wider transmission tunnel and different pedal spacing.
A monochromatic paint scheme that matches the lower body cladding color to the rest of the body becomes a mid-year option. Colors are black, red or white.
The standard alloy wheels are upgraded to 15-inch 8-slot "pie-spoke" units.
Tires are now Pirelli P6 195/60HR15.
The dashboard is redesigned to address premature cracking experienced by earlier cars.
The diamond-shaped 'Merkur' badge on the rear is replaced with simple “Merkur” text on the deck-lid.
The fender-mounted antenna is replaced by an antenna trace bonded to the glass of the rear hatch.
Redesigned steering reduces turns lock-to-lock to 2.42, and turning circle to 35.4 feet.
The engine receives a new cam cover.
The sound system is changed. Joystick balance control is removed.
Three new paint colors are available.
Oil level sensor and dash indicator is deleted.
1988-1989 model with the smaller rear wing
1988:
The bi-plane rear spoiler is replaced by a simpler single-level wing.
The rear hatch gets a larger glass panel in the hatch with the change of wing, which combines to raise the coefficient of drag.
The standard alloy wheels are changed to a BBS-style cast wire-spoke model.
Beige/brown cladding now offered depending on body color.
Speedometer scale now goes to 150mph.
New interior colors are available.
1989:
The dashboard ends are shortened slightly to allow the A-pillar trim to extend past it.
Several automotive customizers produced versions of the XR4Ti that offered increased performance and improved handling. Among these were Roush, Rapido, and RC Consultants. These conversions were sold as either owner-installed kits or pre-built vehicles.
One such special, called the Scorch XS and built by Ralph Todd, replaced the Ford engine with a twin-turbocharged Nissan VG30DETT V6.[25] Only one of these US $50,000 conversions was built; Scorch Prototype #001. It was later upgraded with larger brakes and wheels. The last magazine article featuring the Scorch listed a revised cost of US $55,000. Creation of other Scorch conversions had been started, but never completed.
Ford only offered one special edition of the XR4Ti when it launched the XR4Ti K2 in 1987, the result of a tie-in with ski manufacturer K2 Sports.[4] This all-white model came with colored K2 logos on the front fenders and a roof-mounted ski rack. No mechanical changes were made to the K2 version.
Performance reviews and legacy
In their September 1984 road test of the XR4Ti Car & Driver magazine reported a 0-60mph time of 7.0 seconds, a 1/4 mile time of 15.5 seconds and a top speed of 129mph (207.6km/h).[9] In later tests by the same magazine the car took 7.8 seconds to accelerate from 0-60mph, leading the testers to speculate that the earlier press car might have been a ringer, a not-uncommon practice at the time. In their test data they stated the press car came with a limited slip differential, something that was not offered as standard or an option for the XR4Ti during its production. The first test car returned a combined city/highway fuel economy of 24mpg‑US (9.8L/100km), and generated 0.80 Gs of lateral acceleration.
Numbers from the March 1985 road test by Road & Track magazine are comparable.[26] Their car ran from 0-60mph in 7.9 seconds and reached the end of the quarter mile in 16.0 seconds. Lateral acceleration was measured at 0.767 Gs and the car ran through the R&T slalom at a speed of 59.7mph. Their car's fuel economy was measured as 23mpg‑US (10.2L/100km).
Contemporary reviews of the car often mention either the non-intuitive pronunciation of the brand name or the car's polarizing appearance.[9][26] Most praise the car's handling, while recognizing areas where it falls short of expectations. Some felt the car showed more body roll while cornering than desired.[27] The disk/drum brake system was felt to be adequate but not outstanding. Others were disappointed that no anti-lock was offered. While Car and Driver's first report went into great detail about Ford's efforts to reduce NVH, their later tests reported that there was still noticeable vibration in the drive-line. Effective use of the car has hampered by what some felt was the engine's narrow power band.
Even after production ended the car continued to provoke widely differing opinions. The XR4Ti was on Car and Driver'sTen Best list for 1985.[28] In 2009 however, the magazine listed that honor as one of the "most embarrassing" awards in automotive history.[29]
In addition to Car and Driver's change of heart some have numbered the XR4Ti among the 10 worst cars ever made, and "not (Ford's) finest hour".[30][31]
On the other hand, other articles have called it one of the 10 best forgotten cars, and a car that had unfairly received a bad reputation.[32][33]
Ford used technical feedback from the teams racing the XR4Ti to develop the 1986 Ford Sierra RS Cosworth, which first appeared on race tracks in 1987 and was superseded in mid-1987 by the Ford Sierra RS500. Some of the body panels used to stiffen the Sierra chassis and create the Merkur shell were subsequently branded 909 Motorsport parts for later adaptation to a Sierra shell. Many see the successes and failures of the XR4Ti as being the blueprint for success of the dominant RS500 Sierras.
Between 1986 and 1987, Pete Halsmer and Scott Pruett campaigned the Roush-prepped XR4Ti, although of a tubeframe construction like that of a silhouette racing car, to take the Trans-Am Series title. Along with Paul Miller, the pair also campaigned an XR4Ti successfully in the IMSA series in 1988.
↑ The XR name was first used by Ford on the 1967 Mercury Cougar XR-7, and has since been used on various car models and trim levels in Australia, Europe, North America, and South Africa. While some references report that the 'XR' label stood for 'eXperimental Racing', this is unconfirmed.
Related Research Articles
The Ford Sierra is a mid-size/large family car manufactured and marketed by Ford Europe from 1982–1993, designed by Uwe Bahnsen, Robert Lutz and Patrick le Quément — and noted for its aerodynamic styling producing a drag coefficient of 0.34, a significant improvement over its predecessors.
Mercury was a brand of mid-priced automobiles produced by American manufacturer Ford Motor Company between 1938 and 2011 with 1939 being the first model year. It stood as its own line within Ford until 1945, and thereafter formed half of Ford's Lincoln-Mercury Division. The brand was created by Edsel Ford in 1938 to bridge the gap between the Ford and Lincoln model lines.
The Ford Orion is a small family car that was produced by Ford Europe from 1983 until 1993. A total of 3,534,239 units were sold during the car's ten-year production life.
The Ford Probe is a liftback coupé produced by Ford, introduced in 1988 and produced until 1997. The Probe was the result of Ford's collaboration with its longtime Japanese partner Mazda, and both generations of Probe were derived from the front-wheel drive Mazda G platform that underpinned the Mazda Capella.
The Mercury Cougar is a series of automobiles that was sold by Mercury from 1967 to 2002. The model line is a diverse series of vehicles; though the Cougar nameplate is most commonly associated with two-door coupes, at various stages in its production, the model also was offered as a convertible and a hatchback. During its production as the mid-size Mercury line, the Cougar was also offered as a four-door sedan and five-door station wagon.
Merkur is a defunct automobile brand that was marketed by the Lincoln-Mercury division of Ford Motor Company from 1985 to 1989. Drawing its name from the German word for Mercury, Merkur was targeted at buyers of European executive cars in North America, selling captive imports produced by the German division of Ford of Europe.
The Ford Pinto engine was the unofficial name for a four-cylinder internal combustion engine built by Ford Europe. In Ford sales literature, it was referred to as the EAO or OHC engine and because it was designed to the metric system, it was sometimes called the "metric engine". The internal Ford codename for the unit was the T88-series engine. European Ford service literature refers to it as the Taunus In-Line engine. In North America it was known as the Lima In-Line (LL), or simply the Lima engine due to its being manufactured at Lima Engine in Lima, Ohio.
The BMW E28 is the second generation of BMW 5 Series executive cars, which was produced from 1981 to 1988 and replaced the E12 5 Series. Pre-series production began in April 1981 and the car was introduced in the autumn that year.
The Continental Mark VII, later changed to Lincoln Mark VII, is a rear wheel drive luxury coupe that was produced by Lincoln. Introduced in August 1983 for the 1984 model year, the Continental Mark VII shared its Ford Fox platform with the Ford Thunderbird, Mercury Cougar, and Lincoln Continental. The Fox platform was originally introduced for the 1978 Ford Fairmont and Mercury Zephyr. The same platform was also utilized as the base for the 1982–1987 Lincoln Continental sedan, the Mark VII's four-door companion. Like its predecessor the Continental Mark VI, the Mark VII was manufactured at the Wixom Assembly Plant in Wixom, Michigan through 1992. It was replaced by the Lincoln Mark VIII in 1993.
The Ford Tempo is an front-engine, front-drive, five passenger, two- or four-door sedan manufactured and marketed by Ford for model years 1984-1994, over a single generation. The successor of the Ford Fairmont, the Tempo marked both the downsizing of the Ford compact car line and its adoption of front-wheel drive. Through its production, the model line was offered as a two-door coupe and four-door sedan, with the Mercury Topaz marketed as its divisional counterpart.
The Merkur Scorpio is a mid-size luxury car that was marketed by the Lincoln-Mercury division of Ford for the 1988 and 1989 model years through its Merkur sub-brand. Marketed above the Merkur XR4Ti in the model line, the Scorpio served as the brand's flagship. As a captive import from Ford of Europe, selected Lincoln-Mercury dealers marketed the Scorpio in the United States and Canada.
The Hyundai Stellar is a large family car produced by the South Korean Hyundai Motor Company from July 1983 until the 1992 model year. It succeeded the Ford Cortina, which Hyundai had built under license. The Stellar was designed by Giorgetto Giugiaro using a rear-wheel drive chassis from the Cortina Mark V.
The North American version of the Ford Escort is a range of cars that were sold by Ford from the 1981 to 2003 model years. The direct successor of the Ford Pinto, the Escort also largely overtook the role of the European-imported Ford Fiesta as the smallest vehicle in the Ford model line in North America. Produced across three generations, the first generation was a subcompact; the latter two generations were compact cars. Becoming highly successful in the marketplace, the Escort became the best-selling car in the United States after 1982, a position it would hold for much of the 1980s.
Ginetta Cars Limited is a British specialist builder of racing and sports cars based in Garforth, Leeds, West Yorkshire.
The Ford C3 transmission and its descendants are a family of light-duty longitudinal automatic transmissions built by the Ford Motor Company.
Type 9 is a gearbox from Ford that was used in the Ford Capri 1.6L and 2.0L from 1984 onward; the Capri 2.8 L from 1983 onward; the Ford Sierra 1.6L, 1.8L, and 2.0L; the Sierra XR4i and the Sierra XR4x4 2.8L; the Scorpio 4x4; as well as the US-market Merkur XR4Ti and Merkur Scorpio.
The third-generation Mustang was manufactured and marketed by Ford from 1979-1993, using the company's Fox platform and colloquially called the Fox body Mustang. During its third generation, the Mustang evolved through several sub-models, trim levels, and drivetrain combinations during its production and seemed destined for replacement with a front-wheel drive Mazda platform. Company executives were swayed by consumer opinion and the rear-wheel drive Mustang stayed in production, while the front-wheel drive version was renamed the Ford Probe. Production ended with the introduction of the fourth-generation Mustang (SN-95) for model year 1994.
The Ford Sierra RS Cosworth is a high-performance version of the Ford Sierra that was built by Ford Europe from 1986 to 1992. It was the result of a Ford Motorsport project with the purpose of producing an outright winner for Group A racing in Europe.
The Reliant Scimitar SS1 is an automobile which was produced by British manufacturer Reliant from 1984 to 1995.
The Ford Fiesta Mk2 was the second generation of the Ford Fiesta supermini built by Ford Europe. Originally introduced in 1983, it was a mild facelift of the original car, with some re-engineering to accept an expanded range of engines and it was available in 3-door hatchback and panel van styles. It was replaced by the heavily updated Fiesta Mk3 for 1989.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
