This is a list of Rolls-Royce Merlin variants. Engines of a similar power output were typically assigned different model numbers based on supercharger or propeller gear ratios, differences in cooling system or carburettors, engine block construction, starting system, or arrangement of engine controls. All Merlin engines except versions 131 and 135 were "right hand tractor", i.e. the propeller rotated clockwise viewed from behind.
| Variant [1] | Take-off power [1] | Combat power [2] | Application [1] | Notes [1] |
|---|---|---|---|---|
| PV-12 | 740 hp (552 kW) at 12,000-foot (3,700 m) equivalent | The initial design using an evaporative cooling system. Two built, passed bench Type Testing in July 1934. First flown 21 February 1935. [3] | ||
| Merlin B | 950 hp (708 kW) at 11,000-foot (3,400 m) equivalent | Two built, ethylene glycol liquid cooling system introduced. "Ramp" cylinder heads (inlet valves were at a 45-degree angle to the cylinder). Passed Type Testing February 1935. [3] | ||
| Merlin C | 950 hp (708 kW) at 11,000-foot (3,400 m) equivalent | Development of Merlin B; Crankcase and cylinder blocks became three separate castings with bolt-on cylinder heads. [3] First flight in Hawker Horsley 21 December 1935. [4] | ||
| Merlin E | 955 hp (712 kW) constant output | 1,045 hp (779 kW) maximum rating | Supermarine Spitfire prototype | Similar to C with minor design changes. Passed 50-hour civil test in December 1935. Failed military 100-hour test in March 1936. [5] |
| Merlin F | (Merlin I) Similar to C and E. First flight in Horsley 16 July 1936. [6] This became the first production engine; and was designated as the Merlin I. The Merlin continued with the "ramp" head, but this was not a success and only 172 were made. The Fairey Battle was the first production aircraft to be powered by the Merlin I and first flew on 10 March 1936. [5] | |||
| Merlin G | 1,030 hp (768 kW) | (Merlin II) Replaced "ramp" cylinder heads with parallel pattern heads (valves parallel to the cylinder) scaled up from the Kestrel engine. 400 Hour flight endurance tests carried out at RAE July 1937; Acceptance test 22 September 1937. [6] It was first widely delivered as the 1,030-horsepower (770 kW) Merlin II in 1938, and production was quickly ramped up. [5] | ||
| Merlin I | 890 hp (664 kW) at 2,850 rpm | Fairey Battle Mk.I [7] | First production Merlin; 172 built. Merlin I through III used 100% glycol coolant. | |
| Merlin II (RM 1S) | 880 hp (656 kW) at 3,000 rpm | 1,030 hp (768 kW) at 3,000 rpm at 5,500 ft (1,676 m) with + 6 psi (41 kPa) boost | Spitfire Mk.I, Defiant Mk.I, Hurricane Mk.I, Sea Hurricane Mk.I, Battle Mk.I | Used 100% glycol coolant. First production Merlin II delivered 10 August 1937. [6] [8] [9] [10] |
| Merlin III (RM 1S) | 880 hp (656 kW) at 3,000 rpm | 1,310 hp (977 kW) at 3,000 rpm at 9,000 ft (2,743 m) with 100 octane fuel and +12 psi (83 kPa) boost (5-minute limit). | Spitfire Mk.I, Defiant Mk.I, Hurricane Mk.I, Sea Hurricane Mk.I, Battle Mk.I | Variant of Merlin II with universal propeller shaft, able to be fitted with de Havilland or Rotol propellers. [2] From late 1939, using 100 octane fuel and + 12 psi (83 kPa) boost, the Merlin III developed 1,310 hp (977 kW) at 3,000 rpm at 9,000 ft (2,700 m). Later developing 1,440 hp (1,074 kW) at 3,000 rpm, +16 psi (110 kPa) boost at 5,500 ft (1,676 m) for the Sea Hurricane. [2] [9] Using 87 Octane fuel the power ratings were the same as the Merlin II. [8] First production Merlin III delivered 1 July 1938. [6] |
| Merlin VIII | 1,080 hp (805 kW) at 3,000 rpm | 1,275 hp (951 kW) at 3,000 rpm, +9 psi (62 kPa) boost, sea level with 100 octane | Fulmar Mk.I | |
| Merlin X (RM 1SM) | 1,280 hp (954 kW) at 3,000 rpm | 1,280 hp (954 kW) at 3,000 rpm, +10 psi (69 kPa) boost, sea level | Halifax Mk.I, Wellington Mk.II, Whitley Mk.V and Whitley Mk.VII | 1,130 hp (843 kW) at 3,000 rpm at 5,250 ft (1,600 m) with maximum boost pressure +10 psi (69 kPa); this was the first production Merlin to use a two-speed supercharger; Used in Halifax Mk.I, Wellington Mk.II, and Whitley Mk.V bombers. First production Merlin X delivered 5 December 1938. [6] |
| Merlin XII (RM 3S) | 1,175 hp (876 kW) at 3,000 rpm | 1,280 hp (954 kW) at 3,000 rpm, +12 psi (83 kPa) boost, 10,500 ft (3,200 m) | Spitfire Mk.II | Coffman cartridge starter. First version of Merlin to use 30/70% glycol/water coolant with reinforced construction, able to use constant boost pressure of up to +12 psi (83 kPa) using 100 octane fuel. [9] First production Merlin XII, 2 September 1939. [6] [11] |
| Merlin XX (RM 3SM) | 1,280 hp (954 kW) at 3,000 rpm | 1,490 hp (1,111 kW) at 3,000 rpm, +16 psi (110 kPa) boost, with 100 Octane fuel at 12,500 ft (3,810 m). | Beaufighter Mk.II, Defiant Mk.II, Halifax Mk.II, Halifax Mk.V, Hurricane Mk.II and Hurricane Mk.IV, Lancaster Mk.I, Lancaster Mk.III, Spitfire Mk.III [12] | Had a two speed supercharger giving boost pressures of up to + 14 psi (97 kPa). [13] First production Merlin XX, 4 July 1940. [6] [nb 1] |
| Merlin 21 | 1,280 hp (954 kW) at 3,000 rpm | 1,490 hp (1,111 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 12,500 ft (3,810 m) | de Havilland Mosquito Mk.I, Mk.II, Mk.III, Mk.IV and Mk.VI | Merlin XX with direction of coolant flow reversed for Mosquito wing radiator installation |
| Merlin 22 | 1,390 hp (1,037 kW) at 3,000 rpm | 1,435 hp (1,070 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 11,000 ft | Lancaster Mk.I, York Mk.I | |
| Merlin 23 | 1,390 hp (1,037 kW) at 3,000 rpm | 1,435 hp (1,070 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 11,000 ft (3,353 m) | de Havilland Mosquito Mk.I, Mk.II, Mk.IV, Mk.VI, Mk.XII and Mk.XIII | Merlin 22 with direction of coolant flow reversed for Mosquito wing radiator installation |
| Merlin 24 | 1,610 hp (1,201 kW) at 3,000 rpm | 1,510 hp (1,126 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 9,250 ft (2,819 m) | Lancaster Mk.I, Lancaster Mk.VII, York Mk.I and Halifax Mk.II [14] | |
| Merlin 25 | 1,610 hp (1,201 kW) at 3,000 rpm | 1,510 hp (1,126 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 9,250 ft (2,819 m) | de Havilland Mosquito Mk.VI and Mk.XIX | Merlin 24 with direction of coolant flow reversed for Mosquito wing radiator installation |
| Merlin 27 | 1,610 hp (1,201 kW) at 3,000 rpm | 1,510 hp (1,126 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 9,250 ft (2,819 m) | Hurricane Mk.IV | |
| Merlin 28 | 1,300 hp (969 kW) at 3,000 rpm | 1,240 hp (925 kW) at 3,000 rpm, +9 psi (62 kPa) boost, 11,500 ft (3,505 m) | Lancaster Mk.III, Kittyhawk II (Curtiss P-40F) | Built by Packard as the V-1650-1 |
| Merlin 29 | 1,300 hp (969 kW) at 3,000 rpm | 1,240 hp (925 kW) at 3,000 rpm, +9 psi (62 kPa) boost, 11,500 ft (3,505 m) | Hurricane Mk.XII (Canadian-built), Kittyhawk II (Curtiss P-40F) | , with splined propeller shaft |
| Merlin 30 | 1,300 hp (969 kW) at 3,000 rpm | 1,360 hp (1,014 kW) at 3,000 rpm, +12 psi (83 kPa) boost, 6,000 ft (1,829 m) | Barracuda Mk.I and Fulmar Mk.II | |
| Merlin 31 | 1,300 hp (969 kW) at 3,000 rpm | 1,240 hp (925 kW) at 3,000 rpm, +9 psi (62 kPa) boost, 11,500 ft (3,505 m) | Mosquito Mk.XX (Canadian), Mosquito Mk.40 (Australia), Kittihawk II (P-40F and L) | Built in the United States as the Packard V-1650-1 |
| Merlin 32 (RM 5M) | 1,620 hp (1,208 kW) at 3,000 rpm | 1,640 hp (1,223 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 2,000 ft (610 m) | Barracuda Mk.II, Seafire Mk.II, Hurricane Mk.V, Spitfire PR Mk. XIII [15] | A "low altitude" version of Merlin with cropped supercharger impellers for increased power at lower altitudes, as per the Merlin XXX; fitted with a Coffman engine starter; used mainly in Fleet Air Arm aircraft. [9] First production Merlin 32 delivered 17 June 1942. [6] |
| Merlin 33 | 1,400 hp (1,044 kW) at 3,000 rpm | 1,400 hp (1,044 kW) at 3,000 rpm, +9 psi (62 kPa) boost, 11,500 ft (3,505 m) | Mosquito XX (Canadian), Mosquito 40 (Australia) | Packard-built Merlin 23 |
| Merlin 35 | 1,280 hp (954 kW) at 3,000 rpm, 54.3 inHg (1,380 mmHg) +12 psi (83 kPa) boost | 1,245 hp (928 kW) at 3,000 rpm at 11,500 ft (3,500 m) | Boulton Paul Balliol, Avro Athena | |
| Merlin 38 | 1,400 hp (1,044 kW) at 3,000 rpm | 1,400 hp (1,044 kW) at 3,000 rpm, +9 psi (62 kPa) boost, 11,500 ft (3,505 m) | Lancaster I and III | Packard-built Merlin 24 |
| Merlin 45 (RM 5S) | 1,185 hp (884 kW) at 3,000 rpm | 1,515 hp (1,130 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 11,500 ft (3,505 m) | Spitfire Mk.V, Spitfire PR Mk.IG (later redesignated Spitfire PR.VII), Spitfire PR Mk.IV, Seafire Mk.IB, Seafire Mk.IIC [9] | A variant of the Merlin XX fitted with single-stage, single-speed supercharger for low altitude Spitfire use. First production Merlin 45 delivered 13 January 1941. [6] First of specialised engines for Spitfire Mk V variants and early Seafires. |
| Merlin 45M | 1,230 hp (917 kW) at 3,000 rpm | 1,585 hp (1,182 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 2,750 ft (838 m) | Spitfire LF Mk.V | Version of Merlin 45 with "cropped" (smaller diameter) supercharger impeller allowing greater boost at low altitudes. |
| Merlin 46 | 1,100 hp (820 kW) at 3,000 rpm | 1,415 hp (1,055 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 14,000 ft (4,267 m) | Spitfire Mk.V, Spitfire PR Mk.IV, Spitfire Mk.VII, Seafire Mk.IB and Seafire Mk.IIC [9] | |
| Merlin 47 (RM 6S) | 1,100 hp (820 kW) at 3,000 rpm | 1,415 hp (1,055 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 1,400 ft (427 m) | Spitfire HF Mk.VI high-altitude intercepter | Adapted with a Marshall compressor (often called a "blower") to pressurise the cockpit. First production Merlin 47 delivered 2 December 1941. [6] |
| Merlin 50 (RM 5S) | 1,185 hp (884 kW) at 3,000 rpm | 1,470 hp (1,096 kW) at 3,000 rpm, +16 psi (110 kPa) boost, 9,250 ft (2,819 m) | Spitfire Mk.V | Low-altitude version with supercharger impeller "cropped" to 9.5 in (241 mm) in diameter. [16] [17] Merlin 50 series was first to use the Bendix Stromberg "negative-g" carburettor. [10] [18] [19] |
| Merlin 50M (RM 5S) | 1,230 hp (917 kW) at 3,000 rpm | 1,585 hp (1,182 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 2,750 ft (838 m) | Spitfire LF Mk.V | [10] [16] [17] [18] [19] |
| Merlin 55 | 1,185 hp (884 kW) at 3,000 rpm | 1,470 hp (1,096 kW) at 3,000 rpm, +16 psi (110 kPa), 9,250 ft (2,819 m) | Spitfire Mk.V and Seafire Mk.III | Similar to Merlin 45 but with two-piece cylinder blocks [20] |
| Merlin 55M | 1,230 hp (917 kW) at 3,000 rpm | 1,585 hp (1,182 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 2,750 ft (838 m) | Spitfire LF Mk.V, Seafire Mk.III | Variant with "cropped" supercharger impellor |
| Merlin 60 | 1,390 hp (1,037 kW) at 3,000 rpm | 1,110 hp (828 kW) at 2,850 rpm, +9 psi (62 kPa) boost, 29,000 ft (8,839 m) | Wellington Mk.VI | First variant fitted with two-stage, two-speed supercharger; rated for high altitude. |
| Merlin 61 (RM 8SM) | 1,280 hp (954 kW) at 3,000 rpm | 1,565 hp (1,167 kW) at 3,000 rpm, +15 psi (103 kPa) boost, 11,250 ft (3,429 m) | Spitfire Mk.IX and Spitfire PR Mk.XI | Production variant of Merlin 60 fitted with a new two-speed two-stage supercharger providing increased power at medium to high altitudes. [21] First British production variant to incorporate two-piece cylinder blocks designed by Rolls-Royce for the Packard Merlin. [22] First production Merlin 61 delivered 2 March 1942. [6] |
| Merlin 62 | 1,390 hp (1,037 kW) at 3,000 rpm | 1,110 hp (828 kW) at 2,850 rpm, +9 psi (62 kPa) boost, 29,000 ft (8,839 m) | Wellington Mk.VI | Similar to Merlin 60 but with two-piece cylinder blocks [23] |
| Merlin 63 | 1,280 hp (954 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 8,500 ft (2,591 m) | Spitfire Mk.VIII, [24] IX, PR.XI | Replaced Merlin 61 |
| Merlin 63A [16] | 1,280 hp (954 kW) at 3,000 rpm [16] | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 8,500 ft (2,591 m) | Spitfire PR Mk.XI [16] | |
| Merlin 64 | 1,280 hp (954 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 8,500 ft (2,591 m) | Spitfire Mk.VII [24] | Cabin pressure blower [16] |
| Merlin 66 (RM 10SM) | 1,315 hp (981 kW) at 3,000 rpm | 1,705 hp (1,271 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 5,750 ft (1,753 m) | Spitfire LF Mk.VIII [24] LF Mk.IX | Fitted with supercharger rated for low altitude; Bendix-Stromberg anti-g carburettor [16] [24] [25] |
| Merlin 67 | 1,315 hp (981 kW) at 3,000 rpm | 1,705 hp (1,271 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 5,750 ft (1,753 m) | Similar to Merlin 66 but with reversed coolant flow and 0.42 reduction gear. No production.Similar to Merlin 45 but with two-piece cylinder blocks [26] | |
| Merlin 68 | 1,670 hp (1,245 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 6,400 ft (1,951 m) | Avro Lincoln, Mustang III (North American P-51B and C) | Packard-built version of Merlin 85. [27] Produced for USAAF as Packard V-1650-7 |
| Merlin 69 | 1,315 hp (981 kW) at 3,000 rpm | 1,705 hp (1,271 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 5,750 ft (1,753 m) | de Havilland Mosquito | Packard version of Merlin 67 - similar to Merlin 66 but with reversed coolant flow and 0.42 reduction gear |
| Merlin 70 | 1,250 hp (932 kW) at 3,000 rpm | 1,655 hp (1,234 kW) at 3,000 rpm, +18 psi (124 kPa) boost, 10,000 ft (3,048 m) | Spitfire HF Mk.VIII [24] HF.IX, PR.XI | Bendix Stromberg anti-g carburettor [24] |
| Merlin 71 | 1,250 hp (932 kW) at 3,000 rpm | 1,655 hp (1,234 kW) at 3,000 rpm, +18 psi (124 kPa), 10,000 ft (3,048 m) | Spitfire HF Mk.VII [24] | Cabin pressure blower, [16] Bendix Stromberg anti-g carburettor [24] |
| Merlin 72 | 1,280 hp (954 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa), 8,500 ft (2,591 m) | de Havilland Mosquito PR Mk.IX, B Mk.IX, Mk.XVI and Mk.30. Welkin Mk.I | Similar to Merlin 63 but with reversed coolant flow [28] |
| Merlin 73 | 1,280 hp (954 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa), 8,500 ft (2,591 m) | de Havilland Mosquito Mk.XVI, Welkin Mk.I | Same as Merlin 72 with a cabin pressure blower |
| Merlin 76 (RM 11SM) | 1,250 hp (932 kW) at 3,000 rpm | 1,655 hp (1,234 kW) at 3,000 rpm, +18 psi (124 kPa), 10,000 ft (3,048 m) | de Havilland Mosquito PR Mk.XVI, Mk.30, Welkin Mk.I | 1,233 hp (919 kW) at 35,000 ft (10,668 m); [29] Fitted with a two-speed, two-stage supercharger and a Bendix Stromberg anti-g carburettor. Dedicated "high altitude" version used in the Westland Welkin high-altitude fighter, and some later Spitfire and de Havilland Mosquito variants. |
| Merlin 77 (RM 11SM) | 1,250 hp (932 kW) at 3,000 rpm | 1,655 hp (1,234 kW) at 3,000 rpm, +18 psi (124 kPa), 10,000 ft (3,048 m) | de Havilland Mosquito Mk.XVI, Welkin Mk.I, Spitfire PR Mk.X [16] | Same as Merlin 76 with a pressurising blower [16] |
| Merlin 85 | 1,635 hp (1,219 kW) at 3,000 rpm | 1,705 hp (1,271 kW) at 3,000 rpm, +18 psi (124 kPa), 5,750 ft (1,753 m) | Lancaster Mk.VI and Lincoln Mk.I | Generally similar to Merlin 66 but with 0.42 reduction gear ratio and intercooler header tank integral with intercooler [30] |
| Merlin 130/131 | 2,070 hp (1,544 kW) at 3,000 rpm | de Havilland Hornet F Mk.1, PR Mk.2, F Mk.3, FR Mk.4. | Redesigned "slimline" versions for the de Havilland Hornet. Engine modified to decrease frontal area to a minimum and was the first Merlin series to use down-draught induction systems. Coolant pump moved from the bottom of the engine to the starboard side. Two-speed, two-stage supercharger and S.U. injection carburettor giving a maximum boost of +25 psi (172 kPa). On the Hornet the Merlin 130 was fitted in the starboard nacelle: the Merlin 131, fitted in the port nacelle, was converted to a "reverse" or left-hand tractor engine using an additional idler gear in the reduction gear casing. [31] | |
| Merlin 134/135 | 2,030 hp (1,514 kW) at 3,000 rpm | de Havilland Sea Hornet F Mk.20, NF Mk.21 and PR Mk.22 | Derated 130/131 with maximum boost lowered to +18 psi (124 kPa). With Corliss throttle. [32] | |
| Merlin 224 | 1,635 hp (1,219 kW) at 3,000 rpm | 1,680 hp (1,253 kW) at 3,000 rpm, +18 psi (124 kPa), 2,750 ft (838 m) | Avro Lancaster Mk.I, Mk.III and Mk.X | Packard-built Merlin 24 |
| Merlin 225 | 1,635 hp (1,219 kW) at 3,000 rpm | 1,680 hp (1,253 kW) at 3,000 rpm, +18 psi (124 kPa), 2,500 ft (762 m) | de Havilland Mosquito Mk.25 and Mk.26 | Packard-built Merlin 25 |
| Merlin 266 (RM 10SM) | 1,670 hp (1,245 kW) at 3,000 rpm | 1,710 hp (1,275 kW) at 3,000 rpm, +18 psi (124 kPa), 6,400 ft (1,951 m)t | Spitfire LF Mk.XVI | The prefix "2" indicates engines built by Packard, otherwise as Merlin 66, optimised for low-altitude operation. [11] [16] |
| Merlin 620 | 1,175 hp (876 kW) continuous cruising using 2,650 rpm at + 9 psi (62 kPa) | Avro Tudor, Avro York, and Canadair North Star | Capable of emergency rating of 1,795 hp (1,339 kW) at 3,000 rpm using +20 psi (138 kPa) ; civilian engine developed from Merlin 102; two-stage supercharger optimised for medium altitudes, and used an S.U. injection carburettor. Universal Power Plant (UPP) installation similar to that used on Avro Lincoln. The Merlin 620-621 series was designed to operate in the severe climatic conditions encountered on Canadian and long-range North Atlantic air routes. [33] |
The Rolls-Royce Merlin is a British liquid-cooled V-12 piston aero engine of 27-litre capacity. Rolls-Royce designed the engine and first ran it in 1933 as a private venture. Initially known as the PV-12, it was later called Merlin following the company convention of naming its four-stroke piston aero engines after birds of prey. The engine benefitted from the racing experiences of precursor engines in the 1930s.
The Rolls-Royce Vulture was a British aero engine developed shortly before World War II that was designed and built by Rolls-Royce Limited. The Vulture used the unusual "X-24" configuration, whereby four cylinder blocks derived from the Rolls-Royce Peregrine were joined by a common crankshaft supported by a single crankcase. The engine was originally designed to produce around 1,750 horsepower (1,300 kW) but problems with the Vulture design meant that the engines were derated to around 1,450 to 1,550 hp in service by limiting the maximum rpm.
The Packard V-1650 Merlin is a version of the Rolls-Royce Merlin aircraft engine, produced under license in the United States by the Packard Motor Car Company. The engine was licensed to expand production of the Rolls-Royce Merlin for British use. The engine also filled a gap in the U.S. at a time when similarly powered American-made engines were not available.
The Rolls-Royce Griffon is a British 37-litre capacity, 60-degree V-12, liquid-cooled aero engine designed and built by Rolls-Royce Limited. In keeping with company convention, the Griffon was named after a bird of prey, in this case the griffon vulture.
The Rolls-Royce Peregrine was a 21-litre (1,300 cu in), 885-horsepower (660 kW) liquid-cooled V-12 aero engine designed and built by the British manufacturer Rolls-Royce in the late 1930s. It was essentially the ultimate development of the company's Kestrel engine, which had seen widespread use in military aircraft of the pre-war period.
The Rolls-Royce Buzzard is a British piston aero engine of 36.7 litres capacity that produced about 800 horsepower (600 kW). Designed and built by Rolls-Royce Limited it is a V12 engine of 6 in (150 mm) bore and 6.6 in (170 mm) stroke. Only 100 were made. A further development was the Rolls-Royce R engine. The Buzzard was developed by scaling-up the Rolls-Royce Kestrel Engine.
The Rolls-Royce Eagle Mk XXII is a British 24-cylinder, sleeve valve, H-block aero engine of 46 litre displacement. It was designed and built in the early-1940s by Rolls-Royce Limited and first ran in 1944. It was liquid-cooled, of flat H configuration with two crankshafts and was capable of 3,200 horsepower at 18 psi boost.
The Rolls-Royce Crecy was a British experimental two-stroke, 90-degree, V12, liquid-cooled aero-engine of 1,593.4 cu.in capacity, featuring sleeve valves and direct petrol injection. Initially intended for a high-speed "sprint" interceptor fighter, the Crecy was later seen as an economical high-altitude long-range powerplant. Developed between 1941 and 1946, it was among the most advanced two-stroke aero-engines ever built. The engine never reached flight trials and the project was cancelled in December 1945, overtaken by the progress of jet engine development.
Rolls-Royce produced a range of piston engine types for aircraft use in the first half of the 20th century. Production of own-design engines ceased in 1955 with the last versions of the Griffon; licensed production of Teledyne Continental Motors general aviation engines was carried out by the company in the 1960s and 1970s.
The Rolls-Royce Hawk was a British aero engine designed by Rolls-Royce in 1915. Derived from one bank of six cylinders of the Rolls-Royce Eagle, it produced 75 horsepower at 1,370 rpm. Power was progressively increased to 91 hp by February 1916, and 105 hp by October 1918.
The Rolls-Royce Goshawk was a development of the Rolls-Royce Kestrel that used evaporative or steam cooling. In line with Rolls-Royce convention of naming piston engines after birds of prey, it was named after the goshawk.
Miss Shilling's orifice was a very simple technical device created to counter engine cut-outs experienced during negative G manoeuvres in early Spitfire and Hurricane fighter aeroplanes during the Battle of Britain. Officially called the R.A.E. restrictor, it was referred to under various names, such as Miss Tilly's diaphragm or the Tilly orifice in reference to its inventor, Beatrice "Tilly" Shilling.
The Rolls-Royce Exe, or Boreas, was a 24-cylinder air-cooled X block sleeve valve aircraft engine intended primarily for the new Fairey Fleet Air Arm aircraft, particularly the Fairey Barracuda. The Exe was relatively powerful for its era, producing about 1,100 hp (820 kW). This is notable given the relatively small 1,300 cubic inches (22 L) displacement, the Merlin requiring 1,600 cubic inches (27 L) for approximately the same power level. The X-24 layout made this quite a compact engine.
Supermarine Spitfire variants powered by early model Rolls-Royce Merlin engines mostly utilised single-speed, single-stage superchargers. The British Supermarine Spitfire was the only Allied fighter aircraft of the Second World War to fight in front line service from the beginnings of the conflict, in September 1939, through to the end in August 1945. Post-war, the Spitfire's service career continued into the 1950s. The basic airframe proved to be extremely adaptable, capable of taking far more powerful engines and far greater loads than its original role as a short-range interceptor had called for. This would lead to 19 marks of Spitfire and 52 sub-variants being produced throughout the Second World War, and beyond. The many changes were made in order to fulfil Royal Air Force requirements and to successfully engage in combat with ever-improving enemy aircraft. With the death of the original designer, Reginald J. Mitchell, in June 1937, all variants of the Spitfire were designed by his successor, Joseph Smith, and a team of engineers and draftsmen.
The British Supermarine Spitfire was one of the most popular fighter aircraft of the Second World War. The basic airframe proved to be extremely adaptable, capable of taking far more powerful engines and far greater loads than its original role as a short-range interceptor had allowed for. This would lead to 24 marks of Spitfire, and many sub-variants within the marks, being produced throughout the Second World War and beyond, in continuing efforts to fulfill Royal Air Force requirements and successfully combat ever-improving enemy aircraft.
Arthur Alexander Cecil Rubbra CBE was an English engineer who designed many of Rolls-Royce's successful aero engines. He was "placed by many alongside Royce, Rowledge and Elliot as one of Rolls-Royce's greatest engineers...".
The Rolls-Royce Eagle XVI was a British experimental 16 cylinder aero engine designed and developed by Rolls-Royce Limited in 1925. The engine was test run but did not fly, the project, together with the planned larger variant, the Eagle XX, was cancelled in favour of the Rolls-Royce Kestrel, that was being developed concurrently.
Alfred Cyril Lovesey CBE, AFRAeS, was an English engineer who was a key figure in the development of the Rolls-Royce Merlin aero engine.
Arthur John Rowledge was an English engineer who designed the Napier Lion aero engine and was a key figure in the development of the inter-war Rolls-Royce aero piston engines, including the Rolls-Royce Kestrel and the Rolls-Royce Merlin.
