The U.S. state of Wisconsin is serviced in five distinct numbering plan areas (NPAs) with the following area codes of the North American Numbering Plan (NANP). Area codes 414 and 715 were among the original North American area codes assigned in 1947.
NPA | Region |
---|---|
262 | Southeastern part of the state including Waukesha, Racine and Kenosha, except for Milwaukee County and several outlying areas served by Milwaukee County exchanges |
414† | Milwaukee County and several outlying areas served by Milwaukee County exchanges. |
608/353 | southwestern Wisconsin, including Madison. |
715†/534 | Overlay complex in northern Wisconsin, including Superior, Eau Claire and Wausau. |
920/274 | Overlay complex in eastern Wisconsin including Green Bay, the Fox Cities, Manitowoc and Sheboygan. [1] |
Notes: † original 1947 assignment | |
The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate in the NANP.
A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing. Telephone numbering plans are defined in each of the administrative regions of the public switched telephone network (PSTN) and in private telephone networks.
Area codes 920 and 274 are telephone area codes in the North American Numbering Plan (NANP) for a large area of eastern Wisconsin. Area code 920 was created on July 26, 1997, in a split of area code 414, one of the original North American area codes of 1947. 274 was added to the same numbering plan area (NPA) on May 5, 2023 to create an area code overlay.
Area code 612 is a telephone area code in the North American Numbering Plan (NANP) in the U.S. state of Minnesota. The numbering plan area comprises the city of Minneapolis and a few surrounding municipalities such as Fort Snelling, St. Anthony, and Richfield. Geographically, it is the smallest area code in the state of Minnesota. The area code is one of the two original area codes in the 1947 nationwide numbering plan for the state, when it was assigned to a much larger area, including the entire Twin Cities region and a wide area surrounding it.
Area code 218 is a telephone area code in the North American Numbering Plan (NANP) for the northern part of the U.S. state of Minnesota. It is assigned to the largest of Minnesota's original two numbering plan areas (NPAs), although its geographical boundaries have been modified since inception. It comprises roughly the northern half of the state, and includes the cities of Duluth, Hibbing, Brainerd, Bemidji, Fergus Falls, and Moorhead.
Area code 320 is a telephone area code in the North American Numbering Plan for most of the central part of the U.S. state of Minnesota. The numbering plan area (NPA) excludes the Twin Cities metro region. The area code was created in 1996, by a split of NPA 612, which stretched border-to-border from Wisconsin through the Twin Cities to South Dakota. 320 was the fourth Minnesota area code, and the first new one in the state in 42 years.
Area code 917 is a telephone area code in the North American Numbering Plan for the five boroughs of New York City: The Bronx, Brooklyn, Manhattan, Queens, and Staten Island. It is an overlay code to all numbering plan areas (NPAs) in the city, and was intended to serve cellular, pager, and voicemail applications in the city, a restriction that was subsequently ruled impermissible by the Federal Communications Commission (FCC) while grandfathering that use in New York City. Area code 917 is also assigned to landlines predominantly in Manhattan, to relieve the shortage of numbers there.
Area code 414 is a telephone area code of the North American Numbering Plan for the area around and including the city of Milwaukee in the state of Wisconsin.
Area code 262 is a telephone area code in the North American Numbering Plan for the southeastern part of the U.S. state of Wisconsin. The numbering plan area comprises suburbs that are a part of the Milwaukee and Chicago metropolitan areas. The area code was created on September 25, 1999, in an area code split of area code 414.
Area codes 608 and 353 are telephone area codes in the North American Numbering Plan for much of southwestern Wisconsin, including the state capital city Madison. Area code 608 was assigned in 1955 to a numbering plan area created from areas with area code 414 and area code 715, and was the third area code created in Wisconsin. Rapid growth of the area, specifically in Dane County, brought the area code close to exhaustion of central office prefixes, with NANPA projections in 2022 projecting the need for relief by late 2023. In September 2022, the Wisconsin Public Service Commission and North American Numbering Plan Administrator (NANPA) announced an overlay complex for the numbering plan area with new area code 353, with an in-service date of September 15, 2023. New central office code orders were accepted starting on July 11, 2023, but activatlon is contingent on complete exhaustion of central office codes for 608.
Area codes 715 and 534 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of Wisconsin. The numbering plan area (NPA) comprises most of the northern part of the state. 715 was one of the original North American area codes created in 1947, while 534 was added in 2010 as an additional code for the same numbering plan area to form an overlay plan.
Area code 906 is the telephone area code in the North American Numbering Plan (NANP) for the Upper Peninsula of Michigan.
Area codes 217 and 447 are telephone area codes in the North American Numbering Plan (NANP) for much of the central part of the U.S. state of Illinois. The numbering plan area (NPA) includes the state capital, Springfield, and Champaign, Urbana, Decatur, Taylorville, Danville, Effingham, Quincy, Rantoul, and Jacksonville. 217 was one of the original North American area codes created in 1947 and 447 was added to the same area in 2021 to form an all-services overlay.
Area code 319 is a telephone area code in the North American Numbering Plan (NANP) for the southeastern and east-central parts of the U.S. state of Iowa.
Area code 870 is a telephone area code in the North American Numbering Plan (NANP) for southern, eastern, and most of northern Arkansas. It was created on April 14, 1997 in a split from area code 501, Arkansas's original area code of 1947.
Area codes 618 and 730 are telephone area codes in the North American Numbering Plan (NANP) for southern Illinois. The numbering plan area (NPA) comprises one hundred and twenty-six municipalities, such as Carbondale, Cairo, Belleville, East St. Louis, Edwardsville, Marion, O'Fallon, Alton, Mt. Vernon, Centralia, Herrin, Salem, Metropolis, Fairview Heights, Collinsville, and Granite City. Area code 618 was one of the original North American area codes created in 1947, and 730 was added to the plan area to form an overlay complex to satisfy the need for more telephone numbers in the region.
A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN) or other public and private networks.