Area code 262 is a telephone area code in the North American Numbering Plan for the southeastern part of the U.S. state of Wisconsin. The numbering plan area comprises suburbs that are a part of the Milwaukee and Chicago metropolitan areas. The area code was created on September 25, 1999, in an area code split of area code 414.
The eastern portion of Wisconsin had been served by area code 414 for half a century until the Green Bay and the Fox River Valley were designated a new numbering plan area (NPA) with area code 920 in 1997, to provide more telephone numbers in the densest populated area of Milwaukee County. Although this was intended as a long-term solution, within a year 414 was again approaching exhaustion due to the continued proliferation of cell phones and pagers. The original mitigation plans called for 262 to be added as an overlay code for all of southeastern Wisconsin. However, overlays were a new concept at the time, and met with some resistance to the mixing of area codes in the same area and the ensuing requirement for ten-digit dialing. As a result, 262 was designated for a separate numbering plan area with nearly all of the territory outside Milwaukee County. A few slivers of Waukesha and Washington counties stayed in 414.
Projections in early 2019 suggested the Milwaukee suburbs would not need another area code until 2044 at the earliest, but later in 2019 no exhaust date was listed, meaning the date is 30 years or more in the future. [1]
Prior to October 2021, area code 262 had telephone numbers assigned for the central office code 988. In 2020, 988 was designated nationwide as a dialing code for the National Suicide Prevention Lifeline, which created a conflict for exchanges that permit seven-digit dialing. This area code was therefore scheduled to transition to ten-digit dialing by October 24, 2021. [2]
The area code serves the following six counties:
These counties include the municipalities of
Area codes 716 and 624 are telephone area codes in the North American Numbering Plan (NANP) for Buffalo, Niagara Falls, and four surrounding counties in western New York. 716 was one of the original North American area codes established in 1947, while 624 was assigned to the identical numbering plan area (NPA) in 2023.
Area codes 314 and 557 are telephone area codes in the North American Numbering Plan (NANP) in the U.S. state of Missouri, serving the city of St. Louis and most of its inner-ring suburbs in neighboring St. Louis County. The numbering plan area is bordered to the west by area code 636, which serves St. Louis' outer suburbs to the west, south, and north. Across the Mississippi River to the east, 314 is adjacent to area code 618, which serves southern Illinois and most of Metro East. Area code 557 was added to the 314 numbering plan area on August 12, 2022, to form an overlay numbering plan.
Ten-digit dialing is a telephone dialing procedure in the countries and territories that are members of the North American Numbering Plan (NANP). It is the practice of including the area code of a telephone number when dialing to initiate a telephone call. When necessary, the ten-digit number may be prefixed with the trunk code 1, which is referred to as 1+10-digit dialing or national format.
Area codes 561 and 728 are telephone area codes in the North American Numbering Plan (NANP) for Palm Beach County in the U.S. state of Florida. 561 was created on May 13, 1996, in a split of area code 407. The numbering plan area (NPA) comprises nearly every major city in the county, the largest of which being West Palm Beach, Boca Raton, Wellington, Boynton Beach, Jupiter, Delray Beach, and Belle Glade. On March 10, 2023, area code 728 was added to the same numbering plan area to form an all-services distributed overlay.
The Milwaukee metropolitan area is a major metropolitan area located in Southeastern Wisconsin, consisting of the city of Milwaukee and some of the surrounding area. There are several definitions of the area, including the Milwaukee–Waukesha–West Allis metropolitan area and the Milwaukee–Racine–Waukesha combined statistical area. It is the largest metropolitan area in Wisconsin, and the 39th largest metropolitan area in the United States.
Area codes 920 and 274 are telephone area codes in the North American Numbering Plan (NANP) for a large area of eastern Wisconsin. Area code 920 was created on July 26, 1997, in a split of area code 414, one of the original North American area codes of 1947. 274 was added to the same numbering plan area (NPA) on May 5, 2023 to create an area code overlay.
Area code 414 is a telephone area code of the North American Numbering Plan for the area around and including the city of Milwaukee in the state of Wisconsin.
Area codes 516 and 363 are telephone overlay area codes in the North American Numbering Plan (NANP) for the U.S. state of New York. The numbering plan area (NPA) comprises Nassau County on Long Island. Area code 516 was created in 1951 and 363 was added to the numbering plan area in 2023.
Area codes 804 and 686 are telephone area codes in the North American Numbering Plan (NANP) for the east-central portion of Virginia. The numbering plan area is anchored by Virginia's capital, Richmond, and includes most of its metropolitan area. Other communities included are Chesterfield, Henrico, Hopewell, Mechanicsville, Powhatan, Midlothian, Petersburg, and Colonial Heights. This also includes the Northern Neck and the Middle Peninsula. The two southernmost counties on the Middle Peninsula, Gloucester and Mathews, are part of the Hampton Roads metropolitan area, but use 804 and 686 instead of the area codes 757 and 948 used by the rest of Hampton Roads.
Area codes 608 and 353 are telephone area codes in the North American Numbering Plan for much of southwestern Wisconsin, including the state capital city Madison. Area code 608 was assigned in 1955 to a numbering plan area created from areas with area code 414 and area code 715, and was the third area code created in Wisconsin. Rapid growth of the area, specifically in Dane County, brought the area code close to exhaustion of central office prefixes, with NANPA projections in 2022 projecting the need for relief by late 2023. In September 2022, the Wisconsin Public Service Commission and North American Numbering Plan Administrator (NANPA) announced an overlay complex for the numbering plan area with new area code 353, with an in-service date of September 15, 2023. New central office code orders were accepted starting on July 11, 2023, but activatlon is contingent on complete exhaustion of central office codes for 608.
Area codes 715 and 534 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of Wisconsin. The numbering plan area (NPA) comprises most of the northern part of the state. 715 was one of the original North American area codes created in 1947, while 534 was added in 2010 as an additional code for the same numbering plan area to form an overlay plan.
Area code 951 is a telephone area code in the North American Numbering Plan for western Riverside County in the southern part of the U.S. state of California. It was assigned in 2004 to a new numbering plan area that was created by an area code split of area code 909.
Area codes 209 and 350 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of California. Their service area includes Stockton, Modesto, Turlock, Merced, Winton, Atwater, Livingston, Manteca, Ripon, Tracy, Lodi, Galt, Sonora, Los Banos, San Andreas, Mariposa, and Yosemite, the northern San Joaquin Valley, and the Sierra Foothills.
Area code 319 is a telephone area code in the North American Numbering Plan (NANP) for the southeastern and east-central parts of the U.S. state of Iowa.
Area codes 573 and 235 are telephone area codes in the North American Numbering Plan (NANP) for most of the eastern half of the U.S. state of Missouri outside the immediate St. Louis area, including the state capital of Jefferson City, as well as Columbia, Cape Girardeau, Hannibal, Rolla, and Sikeston. The largest cities are Columbia, home to the University of Missouri, and Jefferson City, the state capital.The numbering plan area (NPA) extends across half of the width of the state, with the northeastern tip near the northeastern corner of the state, the Lake of the Ozarks at the western tip and Doniphan as the southwestern tip. They also serves all of southeastern Missouri and areas adjacent to the Mississippi River. 573 was created on January 7, 1996, in a split of area code 314, which was limited to the St. Louis metropolitan area in Missouri, and 235 was added on March 24, 2024 as part of an overlay complex.
Area codes 513 and 283 are telephone area codes in the North American Numbering Plan (NANP) for the southwest of the U.S. state of Ohio, including Cincinnati and surrounding cities, such as Forest Park, Hamilton, Lebanon, West Chester, Mason, Maineville, Middletown, Milford, Norwood, Oxford, Harrison, Cleves, Miamitown and Trenton.
Area codes 816 and 975 are telephone area codes in the North American Numbering Plan (NANP) for most of the Missouri side of the Kansas City metropolitan area, the St. Joseph area, and all or part of 15 surrounding counties in northwestern Missouri. The numbering plan area originally comprised most of the northern and western two-thirds of the state, bordering with Arkansas, Illinois, Iowa, Kansas, Nebraska, and Oklahoma, but has been reduced to a ribbon bordering Kansas. 816 is one of the original 86 area codes created in 1947. The numbering plan area was converted to an overlay complex with area code 975 in 2023.
Area codes 309 and 861 are telephone area codes in the North American Numbering Plan (NANP) for the west-central part of the U.S. state of Illinois. The numbering plan area includes cities such as Bloomington, Canton, East Moline, East Peoria, Galesburg, Geneseo, Kewanee, Macomb, Minonk, Moline, Morton, Normal, Pekin, Peoria, Rock Island, Silvis, and many smaller communities in west-central Illinois. Area code 309 was created in 1957 in an split of area code 815. 861 was added to the numbering plan area on February 24, 2023, in formation of an overlay.
Area codes 618 and 730 are telephone area codes in the North American Numbering Plan (NANP) for southern Illinois. The numbering plan area (NPA) comprises one hundred and twenty-six municipalities, such as Carbondale, Cairo, Belleville, East St. Louis, Edwardsville, Marion, O'Fallon, Alton, Mt. Vernon, Centralia, Herrin, Salem, Metropolis, Fairview Heights, Collinsville, and Granite City. Area code 618 was one of the original North American area codes created in 1947, and 730 was added to the plan area to form an overlay complex to satisfy the need for more telephone numbers in the region. The current population of the 618/730 area code is 1,288,816 people. It encompasses approximately 15,458 square mile ; and has a population density of 83.38 people per square mile.
Area codes 440 and 436 are telephone area codes in the North American Numbering Plan (NANP) for the U.S. state of Ohio, serving the parts of the Greater Cleveland area, surrounding the city of Cleveland, but not the city and most of its inner suburbs.
| North: 920 | ||
| West: 353/608, 920 | 262 | East: 414, Lake Michigan, 231, 269, |
| South: 847/224, 815/779 | ||
| Illinois area codes: 217, 224/847, 309, 312, 331/630, 618, 708, 773, 779/815, 872 | ||
| Michigan area codes: 231, 248/947, 269, 313, 517, 586, 616, 734, 810, 906, 989 | ||