Lord Falkland (locomotive)

Last updated
Lord Falkland
Type and origin
Power typeSteam
Builder E. B. Wilson and Company
Build date1850/1851 (likely)
Specifications
Configuration:
   Whyte 0-6-0
Gauge 1,676 mm (5 ft 6 in)
Fuel typeSteam
Career
Operators Great Indian Peninsula Railway
First run18 February 1852
DispositionUnknown

Lord Falkland was the first steam locomotive to run in Bombay. It made its maiden run on 18 February 1852, [1] fourteen months before the official opening of the Great Indian Peninsula Railway (the company that operated it) on 16 April 1853, the beginning of rail transport in India.

Contents

It was named after the then Governor of Bombay, Lucius Cary, the tenth Lord Falkland. The locomotive was a tank engine presumably built by E.B.Wilson Foundry, the same foundry whose standard gauge loco Thomason first ran in Roorkee December 1851, during the construction of the Solani Aqueduct. A locomotive of the 0-6-0 configuration, [2] it was primarily used for shunting wagons, later also for pulling first trial train run between Bombay and Tannah (now Thane) in November 1852.

Commencement of service

A Bombay Telegraph report of 17 February 1852 reported that, "She has been landed six days..." suggesting that The Locomotive apparently arrived in Bombay via a ship on 11/12 February 1852. The Engine was pulled on a public road by around 200 coolies, all the way to its shed at the erstwhile toddy farm of Phipps' Oart. It was a valuable, and expensive land plot (whose price was estimated at ₹5000, and several of its owners were reluctant to give up the lands. [3] The Land belonging to William Phipps among others was purchased by the GIPR at a cost of ₹4000 to house the engine. The locomotive made its first run on 18 February 1852, when it ran between Byculla and Parel. The response of the natives of Bombay was great, with them standing outside its shed with wonder, exclaiming with amazement a "Shabash" ("Great") when the locomotive began its journey. The locomotive began at a walking pace, later speeding up to 15 mi/h (24 km/h). For some time, the natives gathered around the moving contraption, pressing all around her, and barely leaving the line clear. The Locomotive reached Parel, the then seat of power of the Governor, where it waited for sometime. The second trip was soon undertaken, with this time a lady among the passengers. There were slight stoppages to correct certain issues, but the locomotive appeared in perfect order. [4]

In regular operations

The locomotive was soon put in regular service to Sion, carrying Ballast. Once word spread that the loco was used to transport rubbish, and a clarification had to be provided. The steam powered contraption soon became a thing of immense public interest, with the natives observing keenly the immensity pulling twelve wagons up a steep slope during its operations. Unsatisfied of looking from the side, they would come extremely close to the moving engine, only clearing the path when it came just a few meters away. This was deemed dangerous, and it was suggested, that police be provided here for the safety of the public. Eventually, twelve men with sticks, headed by a European, were employed constantly to keep the crowds away. Some people sensing an opportunity, set up booths selling toddy and cakes, for the visitors coming to watch the operation for hours. [4]

Falkland pulling the first trial train run

On 18 November 1852, a trial journey was undertaken by the company, between Bombay and Tannah, pulled by the Lord Falkland. The passengers were to be the directors, engineers and their friends, making their afternoon journey to the Parsick (Parsik) point in Tannah. [4] As reported by the Allen's Indian Mail of 1852, the journey would begin at noon, reaching their destination at around 1 p.m.. With the carriages still not in order, trucks would be fitted up instead. At Parsick, they would tiffin in the tunnel present there, and after some time leaving back for Bombay, and reaching by sunset. [5] The locomotives and carriages for the GIPR had arrived two months prior in September 1852, but were still under the process of commissioning, the engines being expected to be ready by February of the following year. The contractors hence provided their only working, Lord Falkland for this journey.

The journey was extensively documented by The Bombay Times (now known as The Times of India) describing the entire route from start to finish, even documenting the works at Tannah. This journey received a large of a response, with several gathering around the line at Mazagaon. This time, the engine achieved a maximum speed of 50 mph (80 km/h), with an average of 30 mph (about 48 km/h). The journey was completed in just 45 minutes. [1]

Aftermath

The official train journey that took place on 16 April 1853 between Bori Bunder and Tannah, was pulled not by the veteran Lord Falkland, but reportedly by three locomotives, named Sindh, Sultan and Sahib. Lord Falkland continued its service on the line for sometime. Several years later, it was sold to the BB&CI Railway that too began its service in the western part of Bombay in the 1860s. [1]

Related Research Articles

<i>Stourbridge Lion</i> Railroad steam locomotive built in 1829

The Stourbridge Lion was a railroad steam locomotive. It was the first locomotive and the first foreign built locomotive to be operated in the United States, and one of the first locomotives to operate outside Britain. It takes its name from the lion's face painted on the front, and Stourbridge in England, where it was manufactured by the firm Foster, Rastrick and Company in 1829. The locomotive, obtained by the Delaware & Hudson Canal Company (D&H), was shipped to New York in May 1829, where it was tested raised on blocks. It was then taken to Honesdale, Pennsylvania for testing on the company's newly built track. The locomotive performed well in its first test in August 1829, but was found to be too heavy for the track and was never used for its intended purpose of hauling coal wagons. During the next few decades, a number of parts were removed from the abandoned locomotive until only the boiler and a few other components remained. These were acquired by the Smithsonian Institution in 1890 and are currently on display at the B&O Railroad Museum in Baltimore.

<span class="mw-page-title-main">Vulcan Foundry</span> British locomotive manufacturer, 1833–1969

The Vulcan Foundry Limited was an English locomotive builder sited at Newton-le-Willows, Lancashire.

<span class="mw-page-title-main">Great Indian Peninsula Railway</span> Railway company in British India (1849–1951)

The Great Indian Peninsula Railway was a predecessor of the Central Railway, whose headquarters was at the Boree Bunder in Mumbai. The Great Indian Peninsula Railway Company was incorporated on 1 August 1849 by the Great Indian Peninsula Railway Company Act 1849 of the Parliament of the United Kingdom. It had a share capital of 50,000 pounds. On 21 August 1847 it entered into a formal contract with the East India Company for the construction and operation of a railway line, 56 km long, to form part of a trunk line connecting Bombay with Khandesh and Berar and generally with the other presidencies of India. The Court of Directors of the East India Company appointed James John Berkeley as Chief Resident Engineer and Charles Buchanan Ker and Robert Wilfred Graham as his assistants. It was India's first passenger railway, the original 21 miles (33.8 km) section opening in 1853, between Bombay (Mumbai) and Tanna. On 1 July 1925, its management was taken over by the Government. On 5 November 1951, it was incorporated into the Central Railway.

<span class="mw-page-title-main">Matheran Hill Railway</span> Heritage rail line in India

The Matheran Hill Railway (MHR) is a 2 ft narrow-gauge heritage railway in Maharashtra, India, which is administered by the Central Railway zone. It covers a distance of 21 km (13 mi), cutting a swathe through forest and connecting Neral to Matheran in the Western Ghats. The MHR is on the tentative list of UNESCO World Heritage Sites.

Indian Railways operates India's railway system and comes under the purview of the Ministry of Railways of Government of India. As of 2023, it maintains over 108,706 km (67,547 mi) of tracks and operates over 13,000 trains daily with a fleet of 14,800 locomotives. The railways primarily operates a fleet of electric and diesel locomotives along with a few compressed natural gas (CNG) locomotives. Steam locomotives are operated on mountain railways and on heritage trains.

The Salsette–Trombay Railway was a standard-gauge railway line on the island of Salsette in the city of Mumbai (Bombay), India. The line was opened in 1928 by the Great Indian Peninsular Railway under the Bombay Improvement Trust which called for "the opening up of a Railway line running West to South-east and linking up the Andheri and Kurla stations to render available for building purposes vast tracts of land sufficiently close to the city." Hence, the line linked Andheri in the north with the village of Trombay in the east. The rail line was about 13 km long. During weekends, the line was frequented by picnickers who used to travel to Trombay to buy toddy or palm liquor.

<span class="mw-page-title-main">Patiala State Monorail Trainways</span> Company

Patiala State Monorail Trainways (PSMT) was a unique rail-guided, partially road-borne railway system running in Patiala from 1907 to 1927. PSMT was the second monorail system in India, after the Kundala Valley Railway, near Munnar in Kerala, and the only operational locomotive-hauled railway system built using the Ewing System in the world. The Kundala Valley Railway pre-dated this, also using the Ewing system between 1902 and 1908, although this only used bullocks for haulage. Following the conversion of the Kundala Valley Railway from a monorail to a narrow gauge railway in 1908, PSMT was the only monorail system in India until its closure in 1927. These were the only instances of a monorail train system in India, until the Mumbai Monorail was opened on 2 February 2014.

<span class="mw-page-title-main">Byculla railway station</span> Railway Station in Maharashtra, India

Byculla is railway station on the Central line of the Mumbai Suburban Railway. It is located in the neighbourhood of Byculla.

<span class="mw-page-title-main">Parel railway station</span> Railway station in Mumbai, India

Parel is a railway station on the Central Line of the Mumbai Suburban Railway, serving the Parel neighbourhood of Mumbai. The next station south is Currey Road; the next station north is Dadar. A footbridge links Parel on the Central Line to Prabhadevi on Western Line.

<span class="mw-page-title-main">Kurla railway station</span> Mumbai subway station, India

Kurla is a railway station on the Central and Harbour lines of the Mumbai Suburban Railway network. It is among the oldest railway stations in India, it being part of the original 21 mile (33.8 km) Great Indian Peninsula Railway (GIPR) section between Bombay (Mumbai) and Tannah (Thane) that opened in 1853.

<span class="mw-page-title-main">Thane railway station</span> Railway station in Thane, Maharashtra, India

Thane is an A1 category major railway station of the Indian Railways serving the city of Thane, Located in Maharashtra, it is one of the busiest railway stations in India. As of 2013, Thane railway station handles 260000 people daily. More than 1,000 trains visit the station each day, including 330+ long-distance trains. The station has ten platforms. It is the origin and destination station of all the trans-harbour suburban trains. Thane is India's first passenger railway Station along with Bori Bunder railway station.

<span class="mw-page-title-main">Kalyan Junction railway station</span> Railway junction station in Thane district, Maharashtra, India

Kalyan Junction is a major railway junction station on the central line of the Mumbai Suburban Railway network, lying at the junction of the north-east and south-east lines of the suburban Mumbai division of the Central Railway, 54 km (34 mi) north-east of Mumbai. It comes under top 10 busiest railway stations in India. Kalyan Junction is an important stop for all the trains. Nagpur Duronto and Deccan Queen are the two trains that do not stop at Kalyan.

<span class="mw-page-title-main">Mahim Junction railway station</span> Railway Station in Maharashtra, India

Mahim Junction is a railway station on the Western line and Harbour Line of the Mumbai Suburban Railway network. It serves the last town of the Mumbai city : Mahim.

<span class="mw-page-title-main">Indian locomotive class XP</span>

The Indian locomotive class XP was a class of experimental 4-6-2 "Pacific" type steam locomotives used on 5 ft 6 in broad gauge lines in India.

<span class="mw-page-title-main">Dadar–Solapur section</span> Railway Station in Maharashtra, India

Dadar–Solapur section is part of the Mumbai–Chennai line. It connects Dadar and Solapur both in the Indian state of Maharashtra.

<span class="mw-page-title-main">Bori Bunder railway station</span> Defunct railway station in Maharashtra, India

Bori Bunder railway station was a railway station, situated at Bori Bunder, Bombay, Maharashtra, in India. It was from here that first passenger train of the subcontinent ran to Thane in 1853. This station was rebuilt as Victoria Terminus later in 1888.

<span class="mw-page-title-main">Indian locomotive class WCG-1</span>

The Indian locomotive class WCG-1 is a class of 1.5 kV DC electric locomotives that was developed in the late 1920s by Vulcan Foundry and Swiss Locomotive and Machine Works (SLM for Indian Railways. Its class designation stands for broad gauge, Direct Current, Freight traffic engine, 1st generation. They entered service in 1930. A total of 41 WCG-1 locomotives were built in England between 1928 and 1929.

<span class="mw-page-title-main">Indian locomotive class WDS-1</span>

The class WDS-1 was a diesel-electric locomotive used by Indian Railways for shunting and doing departmental works. The model name stands for broad gauge (W), Diesel (D), Shunting (S) 1st generation (1). The WDS-1 is used mostly in the Northern Railway Zone (NR). All these locomotives were withdrawn by the late 1990s.

<span class="mw-page-title-main">Indian locomotive class WCP-2</span>

The Indian locomotive class WCP-2 is a class of 1.5 kV DC electric locomotives that was developed in late 1920s by Swiss Locomotive and Machine Works (SLM) for Indian Railways. The model name stands for broad gauge (W), Direct Current (C), Passenger traffic (P) engine, 2nd generation (2). They entered service in 1938. A single WCP-1 was built at England in 1938.

<span class="mw-page-title-main">GIP-1 to 8</span>

The GIP-1 to 8 were 8 locomotives produced by Vulcan Foundry in 1851, to operate on the Great Indian Peninsula Railway's line from Bombay to Tannah. Three of these would reportedly pull India's first Train from Bori Bunder to Tannah on 16 April 1853.

References

  1. 1 2 3 Aklekar, Rajendra B. (2014). Halt Station India: The Dramatic Tale of the Nation's First Rail Lines. Rupa Publications. p. 43. ISBN   978-81-291-3497-4.
  2. Jhingron, Anoop Krishna. "Historical Steam Locomotives of India". railwaysofraj.blogspot.com. Retrieved 17 August 2024.
  3. Rodrigues, Louiza. “BUILDING RAILWAYS IN BOMBAY: LAND USE POLICY OF THE BRITISH IN BOMBAY AND SALSETTE: 1845 -1855.” Proceedings of the Indian History Congress 71 (2010): 472–80. pg 6- http://www.jstor.org/stable/44147513.
  4. 1 2 3 "The first running of railway locomotive in India" (PDF). swr.indianrailways.gov.in. Archived from the original (PDF) on 2023-12-04.
  5. Allen's Indian Mail. Vol. 10. William H. Allen. 1852. p. 625-6. Retrieved 17 August 2024.