This article needs additional citations for verification .(December 2009) |
M40 field protective mask | |
---|---|
![]() A soldier from the 70th Brigade Support Battalion, 210th Fires Brigade, 2nd Infantry Division wears the M40 during an NBC exercise in South Korea. | |
Type | Gas mask |
Place of origin | United States |
Service history | |
In service | 1992–Present (U.S. military, limited use after 2006) |
Used by | See Users |
Production history | |
Designed | 1980s |
The M40 field protective mask was one of various protective masks used by the United States Armed Forces and its allies to protect from field concentrations of chemical and biological agents, along with radiological fallout particles. It is not effective in an oxygen deficient environment or against ammonia.
The M40 was the result of a program in the 1980s to develop a successor to the M17-series protective masks which had been in service with the US armed forces since 1959. The M40 was to be a return to conventional protective mask design with an external side-mounted filter canister, rather than the internal cheek filters of the M17, which were awkward to change, especially in a contaminated environment.
The M40 was phased into service with the U.S. Army and Marine Corps in the mid-1990s, with another new design, the MCU-2/P also replacing the older M17 in service with the U.S. Air Force and Navy. However, both masks suffered from the inadequate protective capabilities of their face pieces, which was of a silicone rubber susceptible to corrosion from blister agents.[ citation needed ] Thus, the masks were effectively ill-suited for protecting against much more than riot control agents, and a butyl rubber 'second skin' had to be quickly issued for fitting over and reinforcing the M40 facepiece to make it effective in its intended role.
The M42 series masks are a variant of this mask with alterations that make it better suited for use by armored vehicle crews, who have to connect their masks to and draw air from their vehicle's own filtration system.
The M40 field protective mask is currently being replaced by the M50 joint service general purpose mask. [1] [2]
On September 2, 2017, the Philippine Marine Corps received 1,000 M40 gas masks and C2 filters through the U.S. Embassy's Mutual Logistics Support Agreement program. [3]
The M40 field protective mask features three voicemitters, one on either the right or left side, and one in front. A voicecom adapter may be placed over the front voicemitter to amplify the user's voice. The mask can be adjusted in the field to accept the filtering canister on either side, so that a weapon may be shouldered. Right-handed shooters will normally locate the canister on the left side of the mask and vice versa.
The C2 canister on the M40 mask can protect the user from up to 15 nerve, choking, and blister agent attacks, and two blood agent attacks.
The M40 comes with a drinking system that allows the user to drink water after donning the mask for long periods of time in a chemically contaminated environment. In order to use the drinking system the user must also have suitably equipped canteen lids or an adapter for other containers.
In 1983, ILC Dover came out with the first, heavily influenced by the M17 mask, prototype of M40: the XM40 mask. Throughout its development it got numerous important changes that helped pave the way towards the final product, such as increased rigidity, bulk reduction and the removal of a dimple under the voice diaphragm for clearing the mask.
A year later, in 1984, the prototype was finalized as the M40 Field Protective Mask, but it did not enter service until after the Gulf War. It was mass-produced and mainstay issued from 1992 onwards.
Nowadays, XM40 models are considered extremely rare and valuable.
A gas mask is a piece of personal protective equipment used to protect the wearer from inhaling airborne pollutants and toxic gases. The mask forms a sealed cover over the nose and mouth, but may also cover the eyes and other vulnerable soft tissues of the face. Most gas masks are also respirators, though the word gas mask is often used to refer to military equipment, the scope used in this article. Gas masks only protect the user from ingesting or inhaling chemical agents, as well as preventing contact with the user's eyes. Most combined gas mask filters will last around 8 hours in a biological or chemical situation. Filters against specific chemical agents can last up to 20 hours.
Personal protective equipment (PPE) is protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from injury or infection. The hazards addressed by protective equipment include physical, electrical, heat, chemical, biohazards, and airborne particulate matter. Protective equipment may be worn for job-related occupational safety and health purposes, as well as for sports and other recreational activities. Protective clothing is applied to traditional categories of clothing, and protective gear applies to items such as pads, guards, shields, or masks, and others. PPE suits can be similar in appearance to a cleanroom suit.
Ontos, officially the Rifle, Multiple 106 mm, Self-propelled, M50, was an American light armored tracked anti-tank vehicle developed in the 1950s.
The M40 rifle is a bolt-action sniper rifle used by the United States Marine Corps. It has had four variants: the M40, M40A1, M40A3, and M40A5. The M40 was introduced in 1966. The changeover to the A1 model was completed in the 1970s, the A3 in the 2000s, and the A5 in 2009.
A respirator is a device designed to protect the wearer from inhaling hazardous atmospheres including lead fumes, vapors, gases and particulate matter such as dusts and airborne pathogens such as viruses. There are two main categories of respirators: the air-purifying respirator, in which respirable air is obtained by filtering a contaminated atmosphere, and the air-supplied respirator, in which an alternate supply of breathable air is delivered. Within each category, different techniques are employed to reduce or eliminate noxious airborne contaminants.
MOPP is protective gear used by U.S. military personnel in a toxic environment, e.g., during a chemical, biological, radiological, or nuclear (CBRN) strike:
The Service Respirator No. 6 (S6), also known as Respirator NBC S6 No. 1 Mark 1 was a protective gas mask issued to the British Armed Forces. It was developed in the 1950s and issued for general service from 1966 to 1986, when it was replaced by the S10. Currently, the S6 is not used by the British military.
The MCU-2/P is a protective mask used by the United States Air Force and United States Navy, originally designed for the US Army as the XM-30 mask. In December 1982, the U.S. Air Force took over the XM-30 mask development. In 1983, the U.S. Navy requested the first masks off the production lines since the Army mask was no longer in production and the Navy had none. The Air Force agreed, except to get 5,000 masks to support a 1985 Technology Demonstration. Production began in 1985 and some active duty Sailors and Airmen had a new protective mask before Operation Desert Storm in 1991. It replaced the earlier M17 gas mask and is itself scheduled to be replaced by the M50 joint service general purpose mask. The MCU-2/P features a single large lens and a side-mounted filter. A clear or tinted visor and protective hood are used in conjunction with the mask.
The M17 Protective Mask is a series of gas masks that were designed and produced in 1959 to provide protection from all types of known chemical and biological agents present. The M-17 was issued to troops in the Vietnam War, and was standard issue for the U.S. Military until it was replaced by the M40 Field Protective Mask for the U.S. Army and USMC in the mid 1990s while the U.S. Air Force and U.S. Navy replaced it for the MCU-2/P Gas Mask in the mid-1980s.
The M50 series protective mask, officially known as the Joint Service General Purpose Mask, is a lightweight, protective mask system consisting of the mask, a mask carrier, and additional accessories. It was adopted by the U.S. military in 2006 and is manufactured by Avon Rubber, the rubber-producing department of Avon Protection. There are two variants, the M50, for ground and shipboard use, and the M51, for ground vehicle use.
The FM12 CBRN Respirator is a military gas mask produced by Avon Rubber.
A respirator fit test checks whether a respirator properly fits the face of someone who wears it. The fitting characteristic of a respirator is the ability of the mask to separate a worker's respiratory system from ambient air.
A respirator cartridge or gas mask canister is a type of filter that removes gases, volatile organic compounds (VOCs), and other vapors from air through adsorption, absorption, or chemisorption. It is one of two basic types of filters used by air-purifying respirators. The other is a mechanical filter, which removes only particulates. Hybrid filters combine the two.
A powered air-purifying respirator (PAPR) is a type of respirator used to safeguard workers against contaminated air. PAPRs consist of a headgear-and-fan assembly that takes ambient air contaminated with one or more type of pollutant or pathogen, actively removes (filters) a sufficient proportion of these hazards, and then delivers the clean air to the user's face or mouth and nose. They have a higher assigned protection factor than filtering facepiece respirators such as N95 masks. PAPRs are sometimes called positive-pressure masks, blower units, or just blowers.
The SIG Sauer M17 and M18 are service pistols derived from the SIG Sauer P320 in use with the United States Armed Forces. On January 19, 2017, the United States Army announced that a customized version of SIG Sauer's P320 had won the Army's XM17 Modular Handgun System competition. The full-sized model was designated the M17, and the shorter length carry model, the M18. The guns have subsequently been adopted by the Army, Navy, Marine Corps, Air Force, and Space Force. The Coast Guard is the only military branch that will not be receiving the M17 and M18, they will be replacing their SIG Sauer P229R DAK with the Glock 19 Gen5 MOS. The M17 and M18 will be replacing the Beretta M9, as well as several other handguns across five of the six service branches. There are two color variants, coyote brown and black, for both the M17 and M18, though almost all have been produced in coyote brown.
The Small Box Respirator (SBR) was a British gas mask of the First World War and a successor to the Large Box Respirator. In late 1916, the respirator was introduced by the British with the aim to provide reliable protection against chlorine and phosgene gases. The respirator offered a first line of defence against these. The use of mustard gas, was begun by the Germans; a vesicant ("blister agent") that burnt the skin of individuals that were exposed to it. Death rates were high with exposure to both the mixed phosgene, chlorine and mustard gas, however with soldiers having readily available access to the small box respirator, death rates had lowered significantly. Light and reasonably fitting, the respirator was a key piece of equipment to protect soldiers on the battlefield.
The MK 13 rifle is made using the Accuracy International Chassis System (AICS) version 2.0 mated to a long action Remington 700 receiver. The AICS 2.0 folding stock reduces the rifle's overall length by 210 mm (8.3 in) when folded and adds 0.2 kg (0.44 lb) to the rifle's total weight. The rifle has a cheekpiece design that adjusts sideways and for height for optimal cheek position when using night vision equipment or telescopic sights with large objective lenses. There is also a quick-adjust cheek-piece option that has a spring-loaded cheek-piece in conjunction with a quick-adjust butt plate. The side panels are made from a high-strength polymer and are available in the colors olive drab, dark earth or black. Sling attachment points are mounted on each side of the rifle, so it can be carried flat against the back and used comfortably by left- and right-handed users. A front attachment point is situated below the fore-end and can be used to anchor a target-style sling or replaced by an adapter for a Harris bipod.
Joint Service Lightweight Integrated Suit Technology (JSLIST), also known as Advanced Chemical Protective Garment (ACPG) by the U.S. Navy, is a suit used by the U.S. Military for protection against CBRN hazards. It is part of the MOPP ensemble. The JSLIST is made to be worn over the Battle Dress Uniform. The suit consists of lightweight chemical and biological protective clothing consisting of a two piece suit, overboots, gloves, and respiratory equipment. The suit is air permeable to allow breathing to help with the user's comfort and reduce heat stress. The JSLIST has a 120-day service life when removed from packaging, can be worn for 45 consecutive days in an uncontaminated environment, and can be cleaned up to 6 times.
This article incorporates public domain material from websites or documents of the United States Marine Corps .