MacFam Cavalier

Last updated

Cavalier
CAVALIER SA102.5 C-FGOC 04.JPG
Cavalier SA102.5 with retractable landing gear
Role Homebuilt aircraft
National origin Canada, France
ManufacturerMacFam, K&S Aircraft
DesignerStan McLeod
First flight1963 Model SA102
Introduction1963
Developed from GY-20 Minicab
Cavalier SA102.5 Cavalier SA102.5 CF-QLP 02.JPG
Cavalier SA102.5

The MacFam Cavalier is a homebuilt aircraft designed by Stan McLeod, developed through a progressing series of models, all using all-wooden construction. The model range includes the SA102, SA102.5, SA103, SA104 and the SA105. [1] [2]

Contents

Design and development

The Cavalier was a new design based on the French wooden homebuilt GY-20 Minicab designed by Yves Gardan in 1949. The plans were translated from French to English and modified by Stan Mcleod. The plans were marketed by K&S Aircraft of Calgary, Alberta and later MacFam. [2] [3]

The Cavalier is a two-seat side-by-side configuration homebuilt that uses all-wood construction. The landing gear may be configured as fixed, or retractable, in tricycle or conventional layout. [4] The wing uses a single box spar covered in 3/32" plywood leading edge skins. The entire wing is fabric covered. [5]

The early Cavalier SA102 series can accept any four cylinder aircraft engine ranging in weight up to 235 lb (107 kg) and 85 to 135 hp (63 to 101 kW), including the Continental O-200, Lycoming O-235 and Franklin 4AC. Later series can use larger engines. SA102 options included wing tip tanks and a third jump seat. [2]

Variants

SA102
1963 Interchangeable tricycle gear to conventional gear configuration with sliding canopy. [6]
SA102.5
1968 model
SA103
Conventional gear version of Super Cavalier [7]
SA104
Tricycle gear version of Super Cavalier
SA105 Super Cavalier
1968 model retractable tricycle gear model. Engineered for larger 200hp engines.

Aircraft on display

Cavalier SA102.5 on display in the main terminal building of the Winnipeg James Armstrong Richardson International Airport Cavalier SA102.5 C-GPFB 02.JPG
Cavalier SA102.5 on display in the main terminal building of the Winnipeg James Armstrong Richardson International Airport

Specifications (SA105 Super Cavalier)

Data from Flying

General characteristics

Performance

See also

Related development

Related Research Articles

LWD Junak

The LWD/WSK Junak was a Polish trainer aircraft, used from 1952 to 1961 by the Polish Air Force and until 1972 by Polish civilian operators. It was designed by the LWD bureau and produced by the WSK Warszawa-Okęcie factory.

CAB Minicab Light aircraft type (prod. 1949–1955)

The CAB GY-20 Minicab is a two-seat light aircraft designed by Yves Gardan and built in France by Construction Aeronautiques du Bearn (CAB) in the years immediately following World War II. CAB was formed in 1948 by Yves Gardan, Max Lapoerte and M. Dubouts.

Questair Venture American homebuilt aircraft

The Questair Venture is a homebuilt aircraft manufactured by Questair at John Bell Williams Airport in Bolton, Mississippi, United States. The aircraft first flew on 1 July 1987.

The Dale Weejet 800, or Weejet VT-1 was an early light jet intended for high-speed personal transport or primary military training.

The Dempsey TD-3 Beta Lightning is the second original homebuilt aeroplane design by Thomas Dempsey.

Wickham B Type of aircraft

The Wickham B is an American experimental twin engined, homebuilt aircraft.

The Pro-Composites Vision is an American amateur-built aircraft, designed by Steve Rahm and produced by Pro-Composites of Buffalo Grove, Illinois. The aircraft is supplied in the form of plans for amateur construction, with some pre-formed parts made available to speed construction.

The AeroCad AeroCanard is a family of American amateur-built aircraft, designed and produced by AeroCad of Florissant, Missouri. The aircraft is supplied as a kit for amateur construction.

Williams W-17 Stinger American homebuilt aircraft

The Williams W-17 Stinger is an American homebuilt racing aircraft that was designed for Formula One Air Racing by Art Williams and produced by his company, Williams Aircraft Design of Northridge, California, introduced in 1971. The aircraft was at one time available in the form of plans for amateur construction, but only one was ever constructed.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

Alvarez Polliwagen Type of aircraft

The Alvarez Polliwagen is a 1970s homebuilt aircraft. The aircraft has a combination of many high performance features not typically found in a Volkswagen air-cooled engine-powered homebuilt.

The Amax Vixen 105 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit for amateur construction.

Avid Catalina American homebuilt aircraft

The Avid Catalina is an American homebuilt amphibious aircraft that was designed and produced by Avid Aircraft of Caldwell, Idaho. It is a development of the Avid Amphibian.

Collins Dipper American homebuilt aircraft

The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.

The Glassic SQ2000 is an American homebuilt aircraft, designed and produced by Glassic Composites LLC of Sale Creek, Tennessee. When it was available the aircraft was supplied as a kit for amateur construction.

Lancair Tigress American homebuilt aircraft

The Lancair Tigress was an American homebuilt aircraft that was designed by Lance Neibauer and intended for production by Lancair of Redmond, Oregon. Introduced in mid-late 1990s, it was essentially a Lancair IV with a much more powerful engine. When the engine was cancelled just as it was entering production, the Tigress project ended with it. Only prototypes were produced.

The Mirage Marathon is an American homebuilt aircraft, designed and produced by Mirage Aircraft Corporation of Prescott Valley, Arizona. The aircraft is supplied in the form of plans for amateur construction, with materials kits supplied by Aircraft Spruce & Specialty Co. and Wicks Aircraft Supply as well as some specialized parts supplied by the manufacturer.

Tri-R KIS TR-1 American homebuilt aircraft

The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The Coelho AC-11 is a Brazilian homebuilt aircraft that was designed and produced by Altair Coelho of Eldorado do Sul and introduced in 1994. The aircraft was intended to be supplied as a kit for amateur construction, but only one was completed.

The Parrish Dart is an American canard-configuration homebuilt aircraft that was designed by Jimmy R. Parrish and produced by Parrish Aircraft Xperimental, Inc. of Plantation, Florida, introduced in 1995. When it was available the aircraft was supplied in the form of plans for amateur construction.

References

  1. Air Trails: 5. Winter 1971.{{cite journal}}: Missing or empty |title= (help)
  2. 1 2 3 Plane and Pilot: 1978 Aircraft Directory, pages 136-137. Werner & Werner Corp, Santa Monica CA, 1977. ISBN   0-918312-00-0
  3. "Cavalier History" . Retrieved 18 December 2011.
  4. "Larry Burton's Cavalier". Sport Aviation. February 1975.
  5. Jack Cox (October 1976). "Verne Menzimer's Grand Champion Cavalier". Sport Aviation.
  6. "Model SA102" . Retrieved 19 December 2011.
  7. "SA105, 104, 103" . Retrieved 16 December 2011.