Magdeburg hemispheres

Last updated
Gaspar Schott's sketch of Otto von Guericke's Magdeburg hemispheres experiment. Magdeburg.jpg
Gaspar Schott's sketch of Otto von Guericke's Magdeburg hemispheres experiment.

The Magdeburg hemispheres are a pair of large copper hemispheres with mating rims that were used in a famous 1654 experiment to demonstrate the power of atmospheric pressure. When the rims were sealed with grease and the air was pumped out, the sphere contained a vacuum and could not be pulled apart by teams of horses. Once the valve was opened, air rushed in and the hemispheres were easily separated. The Magdeburg hemispheres were invented by German scientist and mayor of Magdeburg, [1] Otto von Guericke, to demonstrate the air pump that he had invented and the concept of atmospheric pressure.

Contents

Speculation varied about the contents of the sphere. Many thought it was simply empty, while others argued the vacuum contained air or some finer aerial substance drawn from the mercury. Sound did not transmit through the sphere, indicating that sound needed a medium in order to be heard, while light did not. [2]

The first artificial vacuum had been produced a few years earlier by Evangelista Torricelli and inspired Guericke to design the world's first vacuum pump, which consisted of a piston and cylinder with one-way flap valves. The hemispheres became popular in physics lectures as an illustration of the strength of air pressure, and are still used in education. The original hemispheres are on display in the Deutsches Museum in Munich.

Aside from its scientific importance, the experiment served to prove the recovery of the city of Magdeburg, which only two decades earlier had undergone the Sack of Magdeburg - considered the worst atrocity of the Thirty Years' War - when 20,000 of its inhabitants were massacred, and only 4,000 remained at the end of the war in 1648. Von Guericke was concerned with both aspects of the experiment, in his double capacity as a leading scientist and as the mayor who worked tirelessly to restore the city's wealth.

Overview

The original Magdeburg hemispheres and Guericke's vacuum pump in the Deutsches Museum, Munich, Germany Magedurger Halbkugeln Luftpumpe Deutsches Museum.jpg
The original Magdeburg hemispheres and Guericke's vacuum pump in the Deutsches Museum, Munich, Germany

The Magdeburg hemispheres, around 50 cm (20 inches) in diameter, [3] [4] [5] [6] were designed to demonstrate the vacuum pump that Guericke had invented. One of them had a tube connection to attach the pump, with a valve to close it off. When the air was sucked out from inside the hemispheres, and the valve was closed, the hose from the pump could be detached, and they were held firmly together by the air pressure of the surrounding atmosphere.

The force holding the hemispheres together was equal to the area bounded by the joint between the hemispheres, a circle with a diameter of 50 cm, multiplied by the difference in air pressure between the inside and the outside. It is unclear how strong a vacuum Guericke's pump was able to achieve, but if it was able to evacuate all of the air from the inside, the hemispheres would have been held together with a force of around 20 kilonewtons (4,500  lbf ; 2.2 short tons-force ), [7] [8] equivalent to lifting a car or small elephant; a dramatic demonstration of the pressure of the atmosphere.

Demonstrations

Small 4 in. hemispheres, 1870s Magdeburg hemispheres small.png
Small 4 in. hemispheres, 1870s

Guericke's demonstration was performed on 8 May 1654 [9] [10] in front of the Imperial Diet, and the Emperor Ferdinand III in Regensburg. [11] Thirty horses, in two teams of fifteen, could not separate the hemispheres until the valve was opened to equalize the air pressure. In 1656 he repeated the demonstration with sixteen horses (two teams of eight) in his hometown of Magdeburg, where he was mayor. He also took the two spheres, hung the two hemispheres with a support, and removed the air from within. He then strapped weights to the spheres, but the spheres would not budge. Gaspar Schott was the first to describe the experiment in print in his Mechanica Hydraulico-Pneumatica (1657). In 1663 (or, according to some sources, in 1661) the same demonstration was given in Berlin before Frederick William, Elector of Brandenburg with twenty-four horses.

The experiment became a popular way to illustrate the principles of air pressure, and many smaller copies of the hemispheres were made, and are used to this day in science classes. Reenactments of von Guericke's experiment of 1654 are performed in locations around the world by the Otto von Guericke Society. On 18 March 2000, a demonstration using sixteen horses was conducted in Great Torrington by Barometer World.

The experiment has been commemorated on at least two German stamps.

After learning about Guericke's pump through Schott's book, Robert Boyle worked with Robert Hooke to design and build an improved air pump. From this, through various experiments, they formulated what is called Boyle's law, which states that the volume of a body of an ideal gas is inversely proportional to its pressure. Much later the ideal gas law was formulated in 1834.

See also

Related Research Articles

<span class="mw-page-title-main">Magdeburg</span> Capital of Saxony-Anhalt, Germany

Magdeburg is the capital of the German state Saxony-Anhalt. The city is situated at the Elbe river.

<span class="mw-page-title-main">Turbomolecular pump</span> Pump designed to create and maintain high vacuum

A turbomolecular pump is a type of vacuum pump, superficially similar to a turbopump, used to obtain and maintain high vacuum. These pumps work on the principle that gas molecules can be given momentum in a desired direction by repeated collision with a moving solid surface. In a turbomolecular pump, a rapidly spinning fan rotor 'hits' gas molecules from the inlet of the pump towards the exhaust in order to create or maintain a vacuum.

<span class="mw-page-title-main">Vacuum pump</span> Equipment generating a relative vacuum

A vacuum pump is a type of pump device that draws gas particles from a sealed volume in order to leave behind a partial vacuum. The first vacuum pump was invented in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

<span class="mw-page-title-main">Vacuum</span> Space that is empty of matter

A vacuum is a space devoid of matter. The word is derived from the Latin adjective vacuus for "vacant" or "void". An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure. Physicists often discuss ideal test results that would occur in a perfect vacuum, which they sometimes simply call "vacuum" or free space, and use the term partial vacuum to refer to an actual imperfect vacuum as one might have in a laboratory or in space. In engineering and applied physics on the other hand, vacuum refers to any space in which the pressure is considerably lower than atmospheric pressure. The Latin term in vacuo is used to describe an object that is surrounded by a vacuum.

<span class="mw-page-title-main">Otto von Guericke</span> 17th-century German scientist, inventor, and politician

Otto von Guericke was a German scientist, inventor, and politician. His pioneering scientific work, the development of experimental methods and repeatable demonstrations on the physics of the vacuum, atmospheric pressure, electrostatic repulsion, his advocacy for the reality of "action at a distance" and of "absolute space" were noteworthy contributions for the advancement of the Scientific Revolution.

The following is a timeline of low-temperature technology and cryogenic technology. It also lists important milestones in thermometry, thermodynamics, statistical physics and calorimetry, that were crucial in development of low temperature systems.

<span class="mw-page-title-main">Pneumatics</span> Branch of engineering

Pneumatics is a branch of engineering that makes use of gas or pressurized air.

<span class="mw-page-title-main">Siphon</span> Device involving the flow of liquids through tubes

A siphon is any of a wide variety of devices that involve the flow of liquids through tubes. In a narrower sense, the word refers particularly to a tube in an inverted "U" shape, which causes a liquid to flow upward, above the surface of a reservoir, with no pump, but powered by the fall of the liquid as it flows down the tube under the pull of gravity, then discharging at a level lower than the surface of the reservoir from which it came.

The year 1654 in science and technology involved some significant events.

<span class="mw-page-title-main">Atmospheric railway</span> Railway propulsion system using atmospheric pressure

An atmospheric railway uses differential air pressure to provide power for propulsion of a railway vehicle. A static power source can transmit motive power to the vehicle in this way, avoiding the necessity of carrying mobile power generating equipment. The air pressure, or partial vacuum can be conveyed to the vehicle in a continuous pipe, where the vehicle carries a piston running in the tube. Some form of re-sealable slot is required to enable the piston to be attached to the vehicle. Alternatively the entire vehicle may act as the piston in a large tube or be coupled electromagnetically to the piston.

This is a list of aviation-related events occurring before the end of the 17th century :

<span class="mw-page-title-main">Air pump</span> Pump for pushing air

An air pump is a pump for pushing air. Examples include a bicycle pump, pumps that are used to aerate an aquarium or a pond via an airstone; a gas compressor used to power a pneumatic tool, air horn or pipe organ; a bellows used to encourage a fire; a vacuum cleaner and a vacuum pump. All air pumps contain a part that moves which drives the flow of air. When the air gets moved, an area of low pressure gets created which fills up with more air.

Vacuum engineering is the field of engineering that deals with the practical use of vacuum in industrial and scientific applications. Vacuum may improve the productivity and performance of processes otherwise carried out at normal air pressure, or may make possible processes that could not be done in the presence of air. Vacuum engineering techniques are widely applied in materials processing such as drying or filtering, chemical processing, application of metal coatings to objects, manufacture of electron devices and incandescent lamps, and in scientific research.

<span class="mw-page-title-main">Jacob Leupold</span>

Jacob Leupold was a German physicist, mathematician, instrument maker, mining commissioner and engineer. He wrote the seminal book Theatrum Machinarum Generale.

<span class="mw-page-title-main">Francesco Lana de Terzi</span>

Francesco Lana de Terzi was an Italian Jesuit priest, mathematician, naturalist and aeronautics pioneer. Having been professor of physics and mathematics at Brescia, he first sketched the concept for a vacuum airship and has been referred to as the Father of Aeronautics for his pioneering efforts, turning the aeronautics field into a science by establishing "a theory of aerial navigation verified by mathematical accuracy". He also developed the idea that developed into Braille.

<span class="mw-page-title-main">Steam digester</span> 17th-century high-pressure cooker

The steam digester or bone digester is a high-pressure cooker invented by French physicist Denis Papin in 1679. It is a device for extracting fats from bones in a high-pressure steam environment, which also renders them brittle enough to be easily ground into bone meal. It is the forerunner of the autoclave and the domestic pressure cooker.

<span class="mw-page-title-main">History of the steam engine</span> Heat engine that performs mechanical work using steam as its working fluid

The first recorded rudimentary steam engine was the aeolipile mentioned by Vitruvius between 30 and 15 BC and, described by Heron of Alexandria in 1st-century Roman Egypt. Several steam-powered devices were later experimented with or proposed, such as Taqi al-Din's steam jack, a steam turbine in 16th-century Ottoman Egypt, and Thomas Savery's steam pump in 17th-century England. In 1712, Thomas Newcomen's atmospheric engine became the first commercially successful engine using the principle of the piston and cylinder, which was the fundamental type of steam engine used until the early 20th century. The steam engine was used to pump water out of coal mines.

<span class="mw-page-title-main">Bert Bolle Barometer</span>

The Bert Bolle Barometer is a large water barometer. At over 12.5 metres tall, it is recognized as the largest barometer in the world by The International Guinness Book of Records. The instrument was created in 1985 in the Netherlands; in 2007 it was reinstalled in the new Visitor Centre of Denmark, Western Australia and was removed from there in 2011.

The Rüchardt experiment, invented by Eduard Rüchardt, is a famous experiment in thermodynamics, which determines the ratio of the molar heat capacities of a gas, i.e. the ratio of and and is denoted by or . It arises because the temperature of a gas changes as pressure changes.

Technica Curiosa was an early compendium of scientific and medical technologies. It was one part of a two-volume work, the other being Physica Curiosa, authored by the Jesuit scholar Gaspar Schott and published in 1664 during the early stages of the Scientific revolution. Schott was an attentive spectator at the demonstrations of Otto von Guericke's vacuum pump and subsequently began extensive experiments and studies on his own. He established a fruitful correspondence with von Guericke and published the earliest account on von Guericke's experiments on air pressure and the vacuum in 1657, titled Experimentum Novum Magdeburgicum as an appendix of his Mechanica Hydraulico-pneumatica. With von Guericke as co-author, he published a reviewed and more detailed account in the Technica Curiosa. The work ranks among the early popular science publications and did much to inspire widespread interest in the sciences.

References

  1. "Guericke, Otto von". Encyclopædia Britannica, 11th Ed. Vol. 12. Cambridge Univ. Press. 1910. p. 670.
  2. Principe, Lawrence M., 'Introduction', The Scientific Revolution: A Very Short Introduction, Very Short Introductions ( Oxford , 2011; online edn, Oxford Academic, 24 Sept. 2013), https://doi.org/10.1093/actrade/9780199567416.003.0001, accessed 4 Sept.
  3. Hablanian, M. H.; Hemeon, C. H. (2003). "Comments about Magdeburg hemispheres reenactment". 50 years of the AVS. American Vacuum Society. Archived from the original on 2008-08-03.
  4. Nave, C.R. (2000). "Original Magdeburg Hemispheres". Hyperphysics. Dept. of Physics and Astronomy, Georgia State Univ.
  5. "Magdeburg hemispheres". Multimedia Catalogue. Institute and Museum of the History of Science, Florence, Italy. 2006.
  6. Hall, Edwin H.; Bergen, Joseph Y. (1903). A Textbook of Physics, 3rd Ed. New York: Henry Holt & Co. p.  52. Magdeburg hemispheres.
  7. Nave, Carl R. (2012). "Magdeburg Hemispheres". Hyperphysics. Dept. of Physics and Astronomy, Georgia State Univ. Retrieved November 12, 2012.
  8. Calculated using a diameter of 0.5 m with atmospheric pressure; force is given by P0 * π * r2, where P0=air pressure and r=cross-sectional radius of the hemisphere. Due to the inefficiencies of the vacuum pump, the artificial vacuum was likely much weaker.
  9. Maleuvre, Didier (2011). The Horizon: A History of Our Infinite Longing. University of California Press. p. 181. ISBN   978-0-520-94711-5. Extract of page 181
  10. Wallace, David C. (2013). Twenty-Two Turbulent Years 1639 - 1661. Fast-Print Publishing. p. 156. ISBN   978-1-78035-660-0. Extract of page 156
  11. "Guericke, Otto von". Encyclopædia Britannica, 11th Edition. Vol. 9. The Encyclopædia Britannica Co. 1910. p. 670.