Mantelli Parma

Last updated
Parma
RoleSingle seat glider
National origin Italy
ManufacturerEmilio Pastorelle
Designer Adriano Mantelli
First flight1947
Number built1

The Mantelli Parma was a simple, light weight, single seat glider built in Italy and first flown in 1947. Only one was constructed.

Contents

Development

The single example of the Parma glider, one of many glider designs from Adriano Mantelli, was built in 1947 in the workshops of Mantelli's Alaparma SpA [1] by Emilio Pastorelli during his spare time. [2] It was intended to be light, simple and cheap to build and easy to transport, whilst flying well in thermals. It had a cantilever high wing mounted on top of its fuselage and constructed in one piece to keep the weight very low. The wing had a single spar, with plywood skin forward around the leading edge forming a torsion-resistant D-box. In plan the wing was rectangular with rounded tips. [2]

The Parma had an smoothly plywood skinned, oval cross-section fuselage, with its cockpit under the wing leading edge and enclosed by a single piece transparency. The fuselage tapered rearwards, where a straight edged, round tipped tailplane mounted on top of the fuselage carried elevators with a cut-out for rudder movement. The fin and rudder were rounded, the latter of broad chord and reaching down to the keel. The glider landed on a sprung skid reaching from the nose almost to the wing trailing edge, assisted by a small tail bumper. [2]

Mantelli flew his glider on its first flight in 1947, aerotowed by the AM-9, a two-seat motor-glider [1] and another of his designs. [2] The Parma proved to be a useful trainer and could use weak thermals; it could also, despite its single piece wing, be transported behind a bicycle. To remove the wing for transport required the removal of just three bolts. [2]


Specifications

Data from Pedrielli (2011) p.217 [2]

General characteristics

Performance


Related Research Articles

Ciani Eventuale

The Ciani EC 40/62 Eventuale, sometimes known as the SSVV EC 40/62 Eventuale, was an Italian glider. Seating two in tandem, it first flew in 1962 but did not enter production.

The Ciani EC.37/53 Spillo or SSVV EC.37/53 Spillo was a single seat competition glider designed and built in Italy in the 1950s. It had the highest aspect ratio wing of any wooden glider. Only one was built.

Bonomi BS.7 Allievo Italia

The Bonomi BS.7 Allievo Italia was a single seat, primary glider designed and built in Italy in the 1920s.

The Bonomi BS.10 Ardea was an Italian single seat high performance glider, designed and built in the mid-1930s. Only one was built.

The Bonomi BS.18 Airone was a single seat training glider, designed in Italy in 1936. Only one was built.

The Bonomi BS.28 Alcione, sometimes known as the Lombarda BS.28 Alcione, was a single seat competition sailplane designed and built in Italy in 1937-8. About four were completed, with two more or less refined fuselages.

The Aviomilano CPV1, also known as the Arlecchino, was an Italian high performance sailplane built in the early 1960s. Only one was built.

The Tedeschi E.T.186 was a simple, single seat training glider built in Italy and first flown in 1947. Only one was constructed.

The Caproni Vizzola MF and 2 were single-seat gliders built in Italy just before world War II. Intended as training aircraft capable of aerobatics, the two variants differed only in their fuselages. Only one of each was built, but they were both successful in Italian competitions.

The DTGL Sant' Ambrogio was an Italian single seat glider, designed and built by a 19-year-old model aircraft enthusiast, that competed in the 1938 national championships. Four more were constructed from his plans.

The Mantelli-Fossa MF-1 was a single-seat primary glider built in Italy in 1934. Only one was constructed.

The GP1 was an Italian glider constructed by university students in Pavia in 1925. Only one was built.

The CVT1 Zigilo was a single-seat, 12-metre-span (39 ft) Italian training glider designed and built in Italy in the 1950s. Only one was completed.

The Teichfuss Gabbiano was an Italian, one-off, single seat, high performance glider, designed by Luigi Teichfuss and flown in 1928.

The Teichfuss Falco was an Italian single-seat, intermediate-performance glider, designed by Luigi Teichfuss and flown in 1931.

The Teichfuss Grifo was an Italian training glider designed by Luigi Teichfuss and flown in 1934. It was built in small numbers.

The Teichfuss Sparviero was an Italian single seat aerobatic glider, designed by Luigi Teichfuss and flown in 1938.

The Teichfuss Turbine was an Italian single seat high performance glider, designed by Luigi Teichfuss and flown in 1939.

The Teichfuss Borea or LT.35 Borea was an Italian high performance glider designed by Luigi Teichfuss. It was completed by 1943 but never flew and the sole example was destroyed during the German occupation of Italy.

The CAT 28BP was an Italian development of the licence built Dittmar Condor II into a high performance tandem two seat glider. Built in 1938, it anticipated the post-war, two seat Dittmar Condor IV and held the Italian national distance record for many years.

References

  1. 1 2 Simpson, Rod (2005). The General Aviation Handbook. Hinkley, UK: Midland (Ian Allan Publishing). p. 26. ISBN   978-1-85780-222-1.
  2. 1 2 3 4 5 6 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 216–7. ISBN   978-3-9808838-9-4.
  3. ↑ "Notes on the Situation of Gliding in Italy". The Sailplane. 18 (5): 107–8. May 1950.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.