F.4 Buzzard | |
---|---|
General information | |
Type | Biplane fighter |
Manufacturer | Martinsyde |
Designer | |
Primary users | Royal Air Force |
Number built | ~370 [1] |
History | |
First flight | June 1918 |
Retired | 1940, by Finland [2] |
The Martinsyde F.4 Buzzard was developed as a powerful and fast biplane fighter for the Royal Air Force (RAF), but the end of the First World War led to the abandonment of large-scale production. Fewer than 400 were eventually produced, with many exported. Of particular note was the Buzzard's high speed, being one of the fastest aircraft developed during World War I. [3]
In 1917, George Handasyde of Martinsyde designed a single-seat biplane fighter powered by a Rolls-Royce Falcon V-12 engine, the Martinsyde F.3, with a single prototype being built as a private venture without an official order, and had flown at Brooklands aerodrome by October 1917. [4] six being ordered in 1917, with the first flying in November that year. Its performance during testing was impressive, demonstrating a maximum speed of 142 mph (229 km/h), [5] and was described in an official report as "a great advance on all existing fighting scouts", [6] resulting in an order for six pre-production aircraft and 150 production fighters being placed late in 1917. [7] It soon became clear, however, that all Falcon production was required to power Bristol F.2 Fighters, so an alternative to the Falcon would be needed. [8]
Martinsyde designed a new fighter based on the F.3, but powered by a 300 hp (220 kW) Hispano-Suiza 8 engine, the F.4 Buzzard. The Buzzard, like the F.3, was a single-bay tractor biplane powered by a water-cooled engine. It had new lower wings compared with the F.3, and the pilot's cockpit was positioned further aft, but otherwise the two aircraft were similar. The prototype F.4 was tested in June 1918, and again demonstrated excellent performance, being easy to fly and maneuverable as well as very fast for the time. [9] Large orders followed, with 1,450 ordered from Martinsyde, Boulton & Paul Ltd, Hooper & Co and the Standard Motor Company. It was planned to supply the French Aéronautique Militaire as well as the British Royal Air Force, and production of a further 1,500 aircraft was planned in the United States of America. [10]
Deliveries to the RAF had just started when the Armistice between the Allies and Germany was signed. Martinsyde was instructed to only complete those aircraft which were part built, while all other orders were cancelled. The Buzzard was not adopted as a fighter by the post war RAF, the cheaper Sopwith Snipe being preferred despite its lower performance. [11]
Martinsyde continued development of the Buzzard, buying back many of the surplus aircraft from the RAF, and producing two-seat tourers and floatplanes. After the bankruptcy of Martinsyde in 1922, these aircraft were obtained by the Aircraft Disposal Company which continued to develop and sell F.4 variants for several years. [12]
Despite the limited production, four of the six Martinsyde F.3s ordered were issued to Home Defence squadrons of the RAF in 1918, with two being operated by No. 39 Squadron RAF on 8 July 1918 [6] and one used by 141 Squadron. [13] The RAF received 310 F.4 Buzzards before the end of the First World War, but only 57 would be used. In the immediate post war period, two Buzzards were used as high speed communications aircraft in support of the British delegation at the Paris Peace Conference in 1919, while a few other Buzzards were used at the Central Flying School. [14] [15]
While the postwar RAF was not buying Buzzards, Martinsyde had some success selling them overseas, with both single and two-seat versions being sold to a number of air forces, including those of Spain (20 aircraft), [16] Finland (15 aircraft) [2] and the Soviet Union (41 aircraft). [2] Some of these aircraft had long careers, with six of the Spanish Buzzards remaining in service at the start of the Spanish Civil War. [17] Following the bankruptcy of Martinsyde, the Aircraft Disposal Company sold eight Jaguar engined versions, the ADC.1 to Latvia, one of these remaining in service until 1938. [18]
Other Martinsydes were sold to civil owners for use as tourers, racing aircraft, and in Newfoundland, for survey flights and seal spotting. [19]
Data fromWar Planes of the First World War: Volume One Fighters. [17]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
Related lists
The Fairey Fox was a British light bomber and fighter biplane of the 1920s and 1930s. It was originally produced in Britain for the RAF, but continued in production and use in Belgium long after it was retired in Britain.
The Avro 504 was a single-engine biplane bomber made by the Avro aircraft company and under licence by others. Production during World War I totalled 8,970 and continued for almost 20 years, making it the most-produced aircraft of any kind that served in any military capacity during the First World War. More than 10,000 were built from 1913 until production ended in 1932.
The Sopwith T.1 Cuckoo was a British biplane torpedo bomber used by the Royal Naval Air Service (RNAS), and its successor organization, the Royal Air Force (RAF). The T.1 was the first landplane specifically designed for carrier operations, but it was completed too late for service in the First World War. After the Armistice, the T.1 was named the Cuckoo.
The Bristol Bulldog is a British Royal Air Force single-seat biplane fighter designed during the 1920s by the Bristol Aeroplane Company. More than 400 Bulldogs were produced for the RAF and overseas customers, and it was one of the most famous aircraft used by the RAF during the inter-war period.
The Sopwith 7F.1 Snipe was a British single-seat biplane fighter of the Royal Air Force (RAF). It was designed and built by the Sopwith Aviation Company during the First World War, and came into squadron service a few weeks before the end of the conflict, in late 1918.
The Hawker Fury is a British biplane fighter aircraft used by the Royal Air Force in the 1930s. It was a fast, agile aircraft, and the first interceptor in RAF service faster than 200 mph (320 km/h) in level flight. It was the fighter counterpart to the Hawker Hart light bomber.
The Bristol F.2 Fighter is a British First World War two-seat biplane fighter and reconnaissance aircraft developed by Frank Barnwell at the British and Colonial Aeroplane Company later known as the Bristol Aeroplane Company. It is often simply called the Bristol Fighter, "Brisfit" or "Biff".
The Fairey Aviation Company Fairey III was a family of British reconnaissance biplanes that enjoyed a very long production and service history in both landplane and seaplane variants. First flying on 14 September 1917, examples were still in use during the Second World War.
The Royal Aircraft Factory R.E.8 is a British two-seat biplane reconnaissance and bomber aircraft of the First World War that was designed and produced at the Royal Aircraft Factory. It was also built under contract by Austin Motors, Daimler, Standard Motors, Siddeley-Deasy and the Coventry Ordnance Works.
The Royal Aircraft Factory S.E.5 is a British biplane fighter aircraft of the First World War. It was developed at the Royal Aircraft Factory by a team consisting of Henry Folland, John Kenworthy and Major Frank Goodden. It was one of the fastest aircraft of the war, while being both stable and relatively manoeuvrable. According to aviation author Robert Jackson, the S.E.5 was: "the nimble fighter that has since been described as the 'Spitfire of World War One'".
The Curtiss SBC Helldiver was a two-seat scout bomber and dive bomber built by the Curtiss-Wright Corporation. It was the last combat military biplane procured by the United States Navy. Delivered in 1937, it became obsolete even before World War II and was kept well away from combat with Axis fighters.
The Airco DH.4 is a British two-seat biplane day bomber of the First World War. It was designed by Geoffrey de Havilland for Airco, and was the first British two-seat light day-bomber capable of defending itself.
The Rolls-Royce Falcon is an aero engine developed in 1915. It was a smaller version of the Rolls-Royce Eagle, a liquid-cooled V-12 of 867 cu in capacity. Fitted to many British World War I-era aircraft, production ceased in 1927. The Falcon was designed by R.W. Harvey-Bailey.
The Sopwith 5F.1 Dolphin was a British fighter aircraft manufactured by the Sopwith Aviation Company. It was used by the Royal Flying Corps and its successor, the Royal Air Force, during the First World War. The Dolphin entered service on the Western Front in early 1918 and proved to be a formidable fighter. The aircraft was not retained in the postwar inventory and was retired shortly after the war.
The Fairey Firefly IIM was a British fighter of the 1930s. It was a single-seat, single-engine biplane of all-metal construction. Built by Fairey Aviation Company Limited, it served principally with the Belgian Air Force throughout the 1930s until the outbreak of World War II.
Martinsyde was a British aircraft and motorcycle manufacturer between 1908 and 1922, when it was forced into liquidation by a factory fire.
The Vickers Vendace was a 1920s British trainer aircraft. It was originally designed as a floatplane trainer for the Royal Air Force.
The Westland Wizard was Westland Aircraft's first attempt to produce a monoplane fighter. The project was privately funded and the prototype design was done in the spare time of the company's engineers. This all happened during 1926, with high-speed performance as the primary goal.
The Vickers F.B.16 was a British single-seat fighter aircraft of the First World War. It was originally designed to be powered by an experimental radial engine, development of which was abandoned. When re-engined with more powerful and reliable water-cooled V-8 engines, the F.B.16 demonstrated good performance, but only a few prototypes were built, the type not entering service.
The Vickers F.B.25 was a British two-seat night fighter prototype of World War I designed to attack enemy airships. Completed in 1917, it failed in its official flight tests that year and no order for production resulted.