 | |
| Industry | Aerospace |
|---|---|
| Founded | 1926 |
| Founder | Albert S. Menasco |
| Defunct | 1977 |
| Fate | Bought by Colt in 1977 |
| Successor | Menasco Manufacturing Company |
| Headquarters | , United States |
| Parent |
|
The Menasco Motors Company was an American aircraft engine and component manufacturer.
The company was organized by Albert S. Menasco in 1926 to convert World War I surplus Salmson Z-9 water-cooled nine-cylinder radials into air-cooled engines for private use. His association with John K. (Jack) Northrop and his flying wing project in the late 1920s convinced him of the need for a new configuration of aircraft engine: an inverted in-line air-cooled layout that would have the propeller shaft on top for better ground clearance and improved pilot vision. [1]
In 1929, Menasco designed his own engine, the 4-A, the first of what was to become Menasco's main product line, the inverted, in-line engine. Menasco designed and built a variety of four- and six-cylinder inverted air-cooled aircraft engines, some with supercharging. [2]
During WWII, Menasco manufactured aircraft landing gear for North American, Lockheed, Republic, General Dynamics, and others. After WWII, aircraft landing gear became Menasco's main product.
In 1935 Menasco took over American Cirrus Engines (A.C.E.). [3] A.C.E. manufactured a range of air-cooled four-cylinder inline aero engines, originally licensed from the UK. [4]
The best-known Menasco engines are the air-cooled, inverted inline four- and six-cylinder engine series known as the Pirate and Buccaneer, respectively. [5] Al Menasco was deeply involved with air racing and his engines were popular with racers who needed a small displacement engine. None of the early supercharged engines were production designs with ATC[ clarification needed ] ratings. One of the less obvious benefits Menasco offered was his willingness to build custom engine combinations to fit special airplanes for reasonable prices.
An important advantage of owning a Menasco engine was Al's appreciation of the economics of using off the shelf interchangeable parts whenever possible. His company was the only supplier of inverted in-line engines in the early thirties in the USA. They had reasonably high power, and a ready availability of complete engines and repair parts. [6]
Production of certified engines did not begin until 1936 when Art Chester was hired by Menasco for research and development for the C4S (220-230 hp) and B6S (290 hp) engines. Chester was a race pilot who had a reputation for getting the most horses out of his four-cylinder Menasco, and keeping it reliable at the same time.
A new engine was introduced in 1937: the six-cylinder C6S-4 model, rated at 400 hp at 3300 rpm and 70 in of manifold pressure. It was the first Menasco that really had the power potential to win the Thompson Trophy race. The first prototype went to Rudy Kling for his new Folkerts SK-3 racer in early 1937. In 1938 the commercial version of the C6S-4 was ATC[ clarification needed ] certified at 260 hp.
Al Menasco left the company in 1938. Menasco opened a car dealership, tried his hand at grape cultivation and winemaking, and was sought for advice by aviators and engine manufacturers until his death in 1988. [6]
In 1945, Menasco Motor Company changed its name to Menasco Manufacturing Company to better describe the company's business, which had transitioned from aircraft engines to development and manufacturing aircraft landing gear. By 1946, the company was a subcontractor to Lockheed Aircraft Corp. and manufactured and designed technologies related to gas turbine technologies. [7]
More than 80,000 gear sets were produced during WWII, including such aircraft as the Lockheed P-38 Lightning, the North American P-51 Mustang, the Republic P-47 Thunderbolt, and the Lockheed P-80 Shooting Star.
Beginning about 1946, landing gear manufacturing shifted to include commercial airliners. By the end of the 1990s, Menasco Aerosystems was the free world's largest producer of aircraft landing gear, with plants in California, Texas and Canada. A few of the aircraft that gear sets were made for include the A-7, F-102, C-130, C-141, the Space Shuttle, F-16, F-16E, F-18, F-18E, YF-22, B-1, C-5A, C-5B, B-52, and tip gear for the B-36. Gear sets for Boeing include the 707, 727, 737, 757, 777 and the KC-135. Gear sets were also made for the Lockheed L-1011, Boeing, Douglas, Convair, Martin, McDonnel, Republic, North American and other aircraft manufacturers.
Although the firm built thousands of engines for a variety of training aircraft during WWII, it did not resume engine manufacturing or development after the war, instead focusing on developing its landing gear business. Menasco landing gear became the industry standard, as its reputation for quality was acknowledged across the aircraft industry.
Menasco built the landing gear that allowed the space shuttle to land on a runway. [8] It manufactured the landing gear of the Orbiter structure launched in 1977 from a 300-M steel coated in titanium-cadmium plating. [9]
Malabar Machine Company was started in 1935 by Mr. E.P. “Ed” Grime (pronounced Grim) as a machine shop for manufacturing items for customers. Malabar’s primary business was aircraft jacks, including axle jacks for servicing aircraft, railroads, and automobiles. [7]
Menasco Manufacturing Company acquired Malabar in 1945 [7] , and relocated it to its Burbank, California, plant to operate as the “Malabar Division” of Menasco. Malabar’s sales efforts included both domestic and international airlines and airframe manufacturers.
Malabar continues to manufacture aircraft jack products, and offers a line of aircraft maintenance and support equipment. [10]
In 1970, Menasco, a corporation with manufacturing plants in Burbank, California, and Fort Worth, Texas, purchased two California plants from Howmet Corporation, in Montebello and Pomona, both in California, taking over Howmet's contracts and manufacturing operations for the production of aircraft landing gear. Because the Montebello plant was operating at a substantial loss, Menasco closed the plant. [11]
In 1977, Colt Industries bought Menasco as part of its expansion into the aerospace technology development and manufacturing business sector. [12] Menasco was a supplier of landing gears to General Dynamic in the manufacture of F-16 fighter jets that were sold to the United States NATO allies. [13] As a supplier, Menasco was forced to share its technology with Dutch and Japanese companies, which eventually became its competitors in the global market. [13]
Colt Industries sold its firearms business, a divestiture that led it to change its name to Coltec Industries to emphasize its role as a producer of aerospace, automotive and industrial products. [14]
Coltec was a manufacturer of landing gear systems, engine fuel controls, turbine blades, fuel injectors, nozzles and related components for commercial and military aircraft, and also produces high-horsepower diesel engines for naval ships and diesel, gas and dual-fuel engines for electric power plants. The divisions, principal products and principal markets of the Aerospace/Government segment are as follows: [15]
| Division | Principal product | Principal market |
|---|---|---|
| Menasco | Aircraft landing gear systems and components, flight control actuation systems and other aircraft components | Commercial and military aircraft manufacturers |
| Chandler Evans Control Systems | Aircraft fuel pumps and control systems | Aircraft engine manufacturers |
| Walbar | Blades, vanes and discs for jet engines | Aircraft engine manufacturers |
| Delavan Gas Turbine Products | Fuel injectors, spraybars and other components for gas turbine engines | Aircraft engine manufacturers |
| Lewis Engineering | Cockpit instrumentation and sensors | Commercial and military aircraft and engine manufacturers |
| Fairbanks Morse Engine | Large engines powered by fuel or natural gas | U.S. Navy, electric diesel utilities |
In the first quarter of 1994, Coltec Industries Inc. closed its landing gear manufacturing plant in Burbank, California, consolidating the production of landing gear systems at its Menasco Aerosystems facility in Fort Worth, Texas, and its Menasco Aerospace Ltd. facility in Oakville, Ontario, Canada.
Coltec Industries was acquired by Goodrich Corporation Goodrich Aerospace in 1999 in a $2.2 billion merger, creating a company with interests in aerospace, specialty chemicals and industrial products. It was the second major aerospace acquisition of the year for Goodrich. After approval by shareholders and anti-trust regulators, the merged company moved to Coltec's headquarters in Charlotte, North Carolina. Goodrich is based in Richfield, Ohio. [16]
On July 26, 2012, United Technologies Corporation purchased Goodrich. Unsold Divisions of Hamilton Sundstrand and Goodrich were then merged to create UTC Aerospace Systems.
| Model name | Configuration | Power |
|---|---|---|
| Menasco-Salmson B-2 | R9 | 250 hp [17] |
| Menasco A-4 Pirate | I4 | 90 hp |
| Menasco B-4 Pirate | I4 | 95 hp |
| Menasco C-4 Pirate | I4 | 125 hp |
| Menasco C-4S Pirate | I4 | 150 hp |
| Menasco D-4 Pirate | I4 | 125 hp |
| Menasco D-4-87 Super Pirate | I4 | 134 hp |
| Menasco M-50 Pirate | O4 | 50 hp [17] |
| Menasco A6 Buccaneer | I6 | |
| Menasco B6 Buccaneer | I6 | |
| Menasco C6 Buccaneer | I6 | |
| Menasco C6S Super Buccaneer | I6 | |
| Menasco D6 Super Buccaneer | I6 | |
| Menasco U2-544 Unitwin | I12 | 520 hp |
| Menasco XIV-2040 | ||
| Menasco XH-4070 | ||
| Menasco RJ37 | ||
Aerospace is a term used to collectively refer to the atmosphere and outer space. Aerospace activity is very diverse, with a multitude of commercial, industrial, and military applications. Aerospace engineering consists of aeronautics and astronautics. Aerospace organizations research, design, manufacture, operate, or maintain both aircraft and spacecraft.
The Glenn L. Martin Company, also known as The Martin Company from 1917 to 1961, was an American aircraft and aerospace manufacturing company founded by aviation pioneer Glenn L. Martin. The Martin Company produced many important aircraft for the defense of the US and allies, especially during World War II and the Cold War. During the 1950s and '60s, the Martin Company moved from the aircraft industry into the guided missile, space exploration, and space utilization industries.
Hirth Engines GmbH is an engine manufacturer based in Benningen, Germany. It is currently a part of the UMS Aero Group. Hirth began manufacturing aero engines in the 1920s, was taken over by Heinkel in WWII to develop the Heinkel-Hirth jet engines, and today specialises in small two-stroke engines for light aircraft and other applications.
The Goodrich Corporation, formerly the B.F. Goodrich Company, was an American manufacturing company based in Charlotte, North Carolina. Founded in Akron, Ohio in 1870 as Goodrich, Tew & Co. by Dr. Benjamin Franklin Goodrich, the company name was changed to the "B.F. Goodrich Company" in 1880, to BFGoodrich in the 1980s, and to "Goodrich Corporation" in 2001. Originally a rubber manufacturing company known for automobile tires, the company diversified its manufacturing businesses throughout the twentieth century and sold off its tire business in 1986 to focus on its other businesses, such as aerospace and chemical manufacturing. The BFGoodrich brand name continues to be used by Michelin, who acquired the tire manufacturing business in 1988. Following the acquisition by United Technologies in 2012, Goodrich became a part of UTC Aerospace Systems.
Hamilton Standard was an American aircraft propeller parts supplier. It was formed in 1929 when United Aircraft and Transport Corporation consolidated Hamilton Aero Manufacturing and Standard Steel Propeller into the Hamilton Standard Propeller Corporation. Other members of United Aircraft included Boeing, United Airlines, Sikorsky and Pratt & Whitney. At the time, Hamilton was the largest manufacturer of aircraft propellers in the world.
The Cirrus and Hermes or Cirrus-Hermes are a series of British aero engines manufactured, under various changes of ownership, from the 1920s until the 1950s. The engines were all air-cooled, four-cylinder inline types, with earlier ones upright and later designs inverted.
Nadcap is a global cooperative accreditation program for aerospace engineering, defense and related industries.
The de Havilland Gipsy is a British air-cooled four-cylinder in-line aircraft engine designed by Frank Halford in 1927 to replace the ADC Cirrus in the de Havilland DH.60 Moth light biplane. Initially developed as an upright 5 litre capacity engine, later versions were designed to run inverted with increased capacity and power.
The Menasco Buccaneer was a series of popular six-cylinder, air-cooled, in-line, inverted, aero-engines, that were manufactured by Menasco Motors Company for light general aviation and sport aircraft during the 1930s and 1940s.
The Menasco Pirate series were four-cylinder, air-cooled, in-line, inverted aero-engines, built by the Menasco Motors Company of Burbank, California, for use in light general and sport aircraft during the 1930s and 1940s. The Menasco engines came in both normally aspirated and supercharged forms, with the supercharged models exhibiting superior performance at higher altitudes, with a relatively small increase in dimensions and weight. The supercharged models had the S suffix added to their designation to show supercharging.
Kawasaki Heavy Industries Aerospace Company is the aerospace division of Kawasaki Heavy Industries (KHI). It produces aircraft, space systems, simulators, jet engines, missiles, and electronic equipment.
The Napier Javelin was a British six-cylinder inline air-cooled engine designed by Frank Halford and built by D. Napier & Son. First flown in March 1934 in the prototype of the Percival Mew Gull racing aircraft, the engine was also used in the Spartan Arrow biplane and the Percival Gull.
The Menasco Unitwin 2-544 was a coupled piston engine. Menasco Motors Company of Burbank, California was a well known manufacturer of inverted inline four and six cylinder engines. At the request of Lockheed Aircraft designers, Menasco produced an inverted twelve-cylinder air cooled aircraft engine by designing a common crankcase and gearbox for two of the six cylinder engines. The two crankshafts were combined with a unique double clutch gearbox to power a single propeller. This gave reliability of a twin engine aircraft in a single powerplant. It was a success, but did not enter production as no aircraft were produced that used it.
Hamilton Sundstrand was an American globally active corporation that manufactured and supported aerospace and industrial products for worldwide markets. A subsidiary of United Technologies Corporation, it was headquartered in Windsor Locks, Connecticut. The company was formed from the merger of Hamilton Standard and Sundstrand Corporation in 1999. In 2012, Hamilton Sundstrand was merged with Goodrich Corporation to form UTC Aerospace Systems. In 2018, UTC Aerospace Systems and Rockwell Collins combined to form Collins Aerospace.
The Waterman Arrowbile was a tailless, two-seat, single-engine, pusher configuration roadable aircraft built in the US in the late 1930s. One of the first of its kind, it flew safely but generated little customer interest, and only five were produced.
The American Gyro AG-4 Crusader is a small twin engine aircraft. The aircraft was designed as the Shelton Flying Wing in 1933 by Thomas Miles Shelton.
United States Air Force Plant 42 is a classified aircraft manufacturing plant owned by the United States Air Force in the Antelope Valley, about 60 miles from downtown Los Angeles. It is also used by the National Aeronautics and Space Administration (NASA).
The Isotta Fraschini Beta was an air cooled aircraft engine produced by the Italian engineering company Isotta Fraschini in the 1940s. Isotta Fraschini derived the Beta inverted 6-cylinder in-line aircraft engine from the V-12 Gamma. The engine saw limited production for aircraft, including the Nardi FN.316 and Ambrosini SAI.7, but was generally unsatisfactory in service.
The Vega Model 2 Starliner was a prototype five-seat feeder airliner produced by the Vega Airplane Company, a subsidiary of Lockheed. It was designed to be powered by an unusual powerplant, consisting of two Menasco piston engines coupled together to drive a single propeller. A single example was built, flying in 1939, but no production followed.
The Ogden Osprey was a three engine, high wing monoplane airliner which seated six. Designed in the United States and first flown in the spring of 1930 or earlier, six were built and some used commercially before Ogden Aeronautical ceased trading in the Great Depression.
{{cite book}}: |first= missing |last= (help){{cite web}}: CS1 maint: archived copy as title (link){{cite book}}: |first= missing |last= (help)CS1 maint: multiple names: authors list (link)
| International | |
|---|---|
| National | |
