 |
Nadcap (formerly NADCAP, the National Aerospace and Defense Contractors Accreditation Program) is a global cooperative accreditation program for aerospace engineering, defense and related industries.
| |
Nadcap (formerly NADCAP, the National Aerospace and Defense Contractors Accreditation Program) is a global cooperative accreditation program for aerospace engineering, defense and related industries.
The Nadcap program is administered by the Performance Review Institute (PRI). Nadcap was established in 1990 by SAE International. Nadcap's membership consists of "prime contractors" who coordinate with aerospace accredited suppliers to develop industry-wide audit criteria for special processes and products. Through PRI, Nadcap provides independent certification of manufacturing processes for the industry. [1] PRI has its headquarters in Warrendale, Pennsylvania with branch offices for Nadcap located in London, Beijing, and Nagoya. [2]
The Nadcap program provides accreditation for special processes in the aerospace and defense industry.
These include:
PRI schedules an audit and assigns an industry approved auditor who will conduct the audit using an industry agreed checklist. At the end of the audit, any non-conformity issues will be raised through a non-conformance report. PRI will administer and close out the non-conformance reports with the Supplier. Upon completion PRI will present the audit pack to a 'special process Task Group’ made up of members from industry who will review it and vote on its acceptability for approval.
The Nadcap subscribers include:
Nadcap meetings are held several times a year in different locations worldwide. For example, the 2017 meetings were held in New Orleans, LA, USA in February, Berlin (Germany) in June; and Pittsburgh (Pennsylvania). During these meetings there are open Task Group meetings and other workshops (with participation of Primes, Suppliers, and PRI staff). These meetings are used to discuss the program development and changes to audit criteria among other topics. Agendas and minutes are posted on the PRI website. [3]
During the Nadcap meetings, training classes are provided on different topics such as:
Pratt & Whitney is an American aerospace manufacturer with global service operations. It is a subsidiary of RTX Corporation. Pratt & Whitney's aircraft engines are widely used in both civil aviation and military aviation. Its headquarters are in East Hartford, Connecticut. The company is the world's second largest commercial aircraft engine manufacturer, with a 35% market share as of 2020. In addition to aircraft engines, Pratt & Whitney manufactures gas turbine engines for industrial use, marine propulsion, and power generation. In 2017, the company reported that it supported more than 11,000 customers in 180 countries around the world.
An aerospace manufacturer is a company or individual involved in the various aspects of designing, building, testing, selling, and maintaining aircraft, aircraft parts, missiles, rockets, or spacecraft. Aerospace is a high technology industry.
Nondestructive testing (NDT) is any of a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms nondestructive examination (NDE), nondestructive inspection (NDI), and nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. The six most frequently used NDT methods are eddy-current, magnetic-particle, liquid penetrant, radiographic, ultrasonic, and visual testing. NDT is commonly used in forensic engineering, mechanical engineering, petroleum engineering, electrical engineering, civil engineering, systems engineering, aeronautical engineering, medicine, and art. Innovations in the field of nondestructive testing have had a profound impact on medical imaging, including on echocardiography, medical ultrasonography, and digital radiography.
GKN Ltd is a British multinational automotive and aerospace components business headquartered in Redditch, England. It is a long-running business known for many decades as Guest, Keen and Nettlefolds. It can trace its origins back to 1759 and the birth of the Industrial Revolution.
General Electric Company, doing business as GE Aerospace, is an American aircraft engine supplier that is headquartered in Evendale, Ohio, outside Cincinnati. It is the legal successor to the original General Electric Company founded in 1892, which split into three separate companies between November 2021 and April 2024, adopting the trade name GE Aerospace after divesting its healthcare and energy divisions.
Volvo Aero was a Swedish aircraft, guided missiles and rocket engine manufacturer. It became GKN Aerospace Engine Systems following the company's acquisition by British engineering conglomerate GKN during 2012.
Safran Aircraft Engines, previously Snecma or Snecma Moteurs, is a French aerospace engine manufacturer headquartered in Courcouronnes and a subsidiary of Safran. It designs, manufactures and maintains engines for commercial and military aircraft as well as rocket engines for launch vehicles and satellites.
SIA Engineering Company Limited is a Singaporean company specialising in aircraft maintenance, repair and overhaul (MRO) services in the Asia-Pacific. It is a wholly owned subsidiary of the Singapore Airlines Group (SIA), formed in 1992 with the separation of SIA's engineering division.
Safran S.A. is a French multinational aerospace and defense corporation that designs, develops and manufactures aircraft engines, helicopter engines, spacecraft propulsion systems as well as various other aerospace and military equipment. The company arose in 2005 through a merger between SNECMA and defense electronics specialist SAGEM. Safran's acquisition of Zodiac Aerospace in 2018 significantly expanded its aeronautical activities.
Collins Aerospace is an American technology company that is one of the world's largest suppliers of aerospace and defense products. Headquartered in Charlotte, North Carolina, it is a subsidiary of RTX Corporation.
Spirit AeroSystems Holdings, Inc., is an American aerostructure manufacturer. The company, based in Wichita, Kansas, builds several important pieces of Boeing aircraft, including the fuselage of the 737 and 787, as well as the flight deck section of the fuselage of nearly all Boeing airliners. Spirit also produces parts for Airbus, including fuselage sections and front wing spars for the A350 and the wings for the A220. Spirit's main competition comes from Collins Aerospace, Kawasaki Heavy Industries, Leonardo, and Triumph Group.
Vulcain is a family of European first stage rocket engines for Ariane 5 and the future Ariane 6. Its development began in 1988 and the first flight was completed in 1996. The updated version of the engine, Vulcain 2, was first successfully flown in 2005. Both members of the family use liquid oxygen/liquid hydrogen cryogenic fuel. The new version under development for Ariane 6 will be called Vulcain 2.1.
The aerospace industry of the United Kingdom is the second-largest national aerospace industry in the world and the largest in Europe by turnover, with a global market share of 17% in 2019. In 2020, the industry employed 116,000 people.
ADS Group Limited, informally known as ADS, is the trade organisation representing the aerospace, defence, security and space industries in the United Kingdom. It has more than 1,000 member companies across its sectors, including some of the UK's largest manufacturers, like Airbus, Rolls-Royce, BAE Systems, Meggitt PLC and GKN.
AGC Aerospace & Defense is the portfolio brand of Acorn Growth Companies, an operationally focused, middle market private equity firm investing exclusively in aerospace and defense opportunities.
The General Aviation Manufacturers Association (GAMA) is the industry trade association representing general aviation aircraft manufacturers and related enterprises, chiefly in the United States. It is headquartered in Washington, D.C., with an office in Brussels, Belgium.
MedAccred is an accreditation program for critical process manufacturing operations in the production of medical devices MedAccred is an industry managed program with the medical device industry having responsibility for all decisions regarding program operations, development, and the decision to award accreditations. The MedAccred program is administered on behalf of the medical device industry by the Performance Review Institute (PRI), a not-for-profit affiliate of SAE International. Participants in the MedAccred program consist of medical device OEMs, contract manufacturers and suppliers who work together to develop industry-wide audit criteria and provide accreditation of critical manufacturing process suppliers to improve product quality.
Testia, an Airbus company, is a training, services and products provider for aerostructure testing and Non-Destructive Testing (NDT). It has been fully owned by Airbus since 2013.