Niagara Conservation

Last updated

Niagara Conservation is a manufacturing company based in Fort Worth, Texas best known for its plumbing products and its water conservation efforts. Niagara Conservation also manufactures lighting fixtures, light bulbs, caulks, sealants, and weatherization products.

Contents

Niagara Conservation
Type Private
Industry Manufacturing, Plumbing
Founded1977
FounderWilliam Cutler
Headquarters Flower Mound, Texas, U.S.
Products toilets, showerheads, aerators, lighting fixtures, caulks, sealants, and weatherization products
Website http://www.niagaracorp.com

History

Niagara Conservation was established in 1974 by William Cutler.

Product innovation

Niagara Conservation manufactures water-reducing, green products including toilets, aerators, and showerheads.

In 2009, the company released the Stealth toilet, which used a new technology combining air and water to flush liquids and solids with only 0.8 gallons of water. [1] Niagara's Stealth is currently the only single flush 0.8 gallons per flush (GPF) toilet in the world. [2] The Stealth's ultra-high-efficiency low-flow toilet uses newly engineered technology where an air transfer system pressurizes the bowl's trap-way to flush quietly with limited water usage. [3] All Stealth toilets are certified by the U.S. Environmental Protection Agency’s WaterSense program. [4]

Niagara Conservation also manufactures the Flapperless toilet, which uses a half-cylinder 1.6 gallon bucket instead of a flapper. [5] When the toilet is flushed, the bucket dumps the water into the tank, initiating the flush. [5] The flapper is the piece of common toilet technology that fails most often, without a flapper, a toilet is less likely to fail. [5]

Water conservation

In 2013, Niagara Conservation received the Environmental Protection Agency (EPA) WaterSense Manufacturer Partner of the Year award for helping to increase water efficiency and awareness. [6] Niagara received a similar award in 2011 for contributions to conservation initiatives. [7] Niagara has 30 products that are EPA certified, including the Stealth and Eco-Logic toilets, the Earth, Prismiere and Sava showerheads and the Dual Thread Faucet Aerator.[ citation needed ]

Municipality and utility partnerships

In 2004, Niagara Conservation and Austin Water offered the residents of Austin, Texas the chance to replace their toilets with high-efficiency toilets through the city’s Free Toilet Program. [8] If residents received their water from Austin or an eligible metropolitan utility district, they could replace up to three toilets with Niagara EcoLogic high-efficiency flapperless toilets. [9] The program also offered rebates for purchasing high-efficiency toilets. [9]

In 2009, Niagara Conservation partnered with Fort Worth’s Water Conservation Section to provide free installation of high efficiency pre-rinse spray nozzles and aerators for local foodservice providers to reduce water consumption. [10] The "SpraySmart" program replaced nozzles that use over three gallons of hot water per minute with Niagara nozzles that use 1.28 gallons per minute. [11]

In 2011, the Elsinore Valley Municipal Water District in Lake Elsinore, California launched a free water conservation program that replaced old toilets with Niagara Conservation's Stealth System to save water. [12] The program is currently in its first phase. [12]

In 2012, Niagara Conservation donated 1.0 GPF toilets to the Boys & Girls Clubs of Monterey County to help combat the club's rising water bills. The club previously paid up to $800 a month for water. [13]

In September 2015 California Water Service announced it will begin offering free High-Efficiency Toilets to their customers in California. Cal Water will provide residential customers who have existing toilets using 1.6 gallons per flush or greater with a Niagara Stealth high-efficiency toilets that use 0.8 gallons per flush. Free toilets will be available while supplies last. The homeowner will have to arrange to have the toilet(s) installed and dispose or arrange recycling of their old toilet(s). Since some old toilets use up to 8.0 gallons of water per flush this program is expected to save up to 50 gallons per day per household or up to 18,000 gallons per year per household. [14]

Related Research Articles

<span class="mw-page-title-main">Greywater</span> Type of wastewater generated in households without toilet wastewater

Greywater refers to domestic wastewater generated in households or office buildings from streams without fecal contamination, i.e., all streams except for the wastewater from toilets. Sources of greywater include sinks, showers, baths, washing machines or dishwashers. As greywater contains fewer pathogens than blackwater, it is generally safer to handle and easier to treat and reuse onsite for toilet flushing, landscape or crop irrigation, and other non-potable uses. Greywater may still have some pathogen content from laundering soiled clothing or cleaning the anal area in the shower or bath.

Sustainable living describes a lifestyle that attempts to reduce the use of Earth's natural resources by an individual or society. Its practitioners often attempt to reduce their ecological footprint by altering their home designs and methods of transportation, energy consumption and diet. Its proponents aim to conduct their lives in ways that are consistent with sustainability, naturally balanced, and respectful of humanity's symbiotic relationship with the Earth's natural ecology. The practice and general philosophy of ecological living closely follows the overall principles of sustainable development.

<span class="mw-page-title-main">Flush toilet</span> Toilet that uses water to convey human waste down a pipe

A flush toilet is a toilet that disposes of human waste by using the force of water to flush it through a drainpipe to another location for treatment, either nearby or at a communal facility, thus maintaining a separation between humans and their waste. Flush toilets can be designed for sitting or squatting, in the case of squat toilets. Most modern sewage treatment systems are also designed to process specially designed toilet paper. The opposite of a flush toilet is a dry toilet, which uses no water for flushing.

<span class="mw-page-title-main">Water conservation</span> Policies for sustainable development of water use

Water conservation includes all the policies, strategies and activities to sustainably manage the natural resource of fresh water, to protect the hydrosphere, and to meet the current and future human demand. Population, household size and growth and affluence all affect how much water is used. Factors such as climate change have increased pressures on natural water resources especially in manufacturing and agricultural irrigation. Many countries have already implemented policies aimed at water conservation, with much success. The key activities to conserve water are as follows: any beneficial reduction in water loss, use and waste of resources, avoiding any damage to water quality; and improving water management practices that reduce the use or enhance the beneficial use of water. Technology solutions exist for households, commercial and agricultural applications. Water conservation programs involved in social solutions are typically initiated at the local level, by either municipal water utilities or regional governments.

<span class="mw-page-title-main">Shower</span> Place in which a person bathes under a spray of water

A shower is a place in which a person bathes under a spray of typically warm or hot water. Indoors, there is a drain in the floor. Most showers have temperature, spray pressure and adjustable showerhead nozzle. The simplest showers have a swivelling nozzle aiming down on the user, while more complex showers have a showerhead connected to a hose that has a mounting bracket. This allows the showerer to hold the showerhead by hand to spray the water onto different parts of their body. A shower can be installed in a small shower stall or bathtub with a plastic shower curtain or door. Showering is common due to the efficiency of using it compared with a bathtub. Its use in hygiene is, therefore, common practice.

<span class="mw-page-title-main">Urinal</span> Sanitary fixture for urination

A urinal is a sanitary plumbing fixture for urination only. Urinals are often provided in public toilets for male users in Western countries. They are usually used in a standing position. Urinals can be with manual flushing, automatic flushing, or without flushing, as is the case for waterless urinals. They can be arranged as single sanitary fixtures or in a trough design without privacy walls. Urinals designed for females also exist but are rare. It is possible for females to use stand-up urinals using a female urination device.

GPF may refer to:

<span class="mw-page-title-main">Composting toilet</span> Type of toilet that treats human excreta by a biological process called composting

A composting toilet is a type of dry toilet that treats human waste by a biological process called composting. This process leads to the decomposition of organic matter and turns human waste into compost-like material. Composting is carried out by microorganisms under controlled aerobic conditions. Most composting toilets use no water for flushing and are therefore called "dry toilets".

<span class="mw-page-title-main">Cistern</span> Waterproof receptacle for holding liquids, usually water

A cistern is a waterproof receptacle for holding liquids, usually water. Cisterns are often built to catch and store rainwater. Cisterns are distinguished from wells by their waterproof linings. Modern cisterns range in capacity from a few litres to thousands of cubic metres, effectively forming covered reservoirs.

<span class="mw-page-title-main">Incinerating toilet</span> Type of dry toilet that burns human feces

An incinerating toilet is a type of dry toilet that burns human feces instead of flushing them away with water, as does a flush toilet.

Water supply and sanitation in the United States involves a number of issues including water scarcity, pollution, a backlog of investment, concerns about the affordability of water for the poorest, and a rapidly retiring workforce. Increased variability and intensity of rainfall as a result of climate change is expected to produce both more severe droughts and flooding, with potentially serious consequences for water supply and for pollution from combined sewer overflows. Droughts are likely to particularly affect the 66 percent of Americans whose communities depend on surface water. As for drinking water quality, there are concerns about disinfection by-products, lead, perchlorates, PFAS and pharmaceutical substances, but generally drinking water quality in the U.S. is good.

<span class="mw-page-title-main">Water efficiency</span>

Water efficiency is the practice of reducing water consumption by measuring the amount of water required for a particular purpose and is proportionate to the amount of essential water used. Water efficiency differs from water conservation in that it focuses on reducing waste, not restricting use. Solutions for water efficiency not only focus on reducing the amount of potable water used but also on reducing the use of non-potable water where appropriate. It also emphasizes the influence consumers can have on water efficiency by making small behavioral changes to reduce water wastage, and by choosing more water-efficient products.

<span class="mw-page-title-main">EPA WaterSense</span>

WaterSense is a program sponsored by the U.S. Environmental Protection Agency (EPA), designed to encourage water efficiency in the United States through the use of a special label on consumer products. The goal of this program is to protect the future of the U.S. water supply. WaterSense maintains partnerships with key utility, manufacturer and retail partners across the United States. WaterSense is voluntary, rather than a regulatory program. The EPA develops specifications for water-efficient products – low-flow fixtures – through a public process. If a manufacturer makes a product that meets those specifications, the product is eligible for third-party testing to ensure the stated efficiency and performance criteria have been met. If the product passes the test, the manufacturer is rewarded with the right to put the WaterSense label on that product.

A low-flush toilet is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons per flush and they used float valves that often leaked, increasing their total water use. In the early 1990s, because of concerns about water shortages, and because of improvements in toilet technology, some states and then the federal government began to develop water-efficiency standards for appliances, including toilets, mandating that new toilets use less water. The first standards required low-flow toilets of 1.6 gallons per flush. Further improvements in the technology to overcome concerns about the initial poor performance of early models have further cut the water use of toilets and while federal standards stagnate at 1.6 gallons per flush, certain states' standards toughened up to require that new toilets use no more than 1.28 gallons per flush, while working far better than older models. Low-flush toilets include single-flush models and dual-flush toilets, which typically use 1.6 US gallons per flush for the full flush and 1.28 US gallons or less for a reduced flush.

<span class="mw-page-title-main">Dual flush toilet</span> Flush toilet that uses two buttons to flush different amounts of water

A dual flush toilet is a variation of the flush toilet that uses two buttons or a handle mechanism to flush different amounts of water.

The California Green Building Standards Code is Part 11 of the California Building Standards Code and is the first statewide "green" building code in the US.

The Energy Conservation Program for Consumer Products Other Than Automobiles is a regulatory program that enforces minimum energy conservation standards for appliances and equipment in the United States. The program was established under Part B of Title III of the Energy Policy and Conservation Act of 1975 and gives the Department of Energy (DOE) the authority to develop and implement test procedures and minimum standards for more than 60 products covering residential, commercial and industrial, lighting, and plumbing applications. The Department of Energy is required to set standards that are "technologically feasible and economically justified."

<span class="mw-page-title-main">Residential water use in the U.S. and Canada</span>

Residential water use includes all indoor and outdoor uses of drinking quality water at single-family and multifamily dwellings. These uses include a number of defined purposes such as flushing toilets, washing clothes and dishes, showering and bathing, drinking, food preparation, watering lawns and gardens, and maintaining swimming pools. Some of these end uses are detectable while others are more difficult to gauge.

<span class="mw-page-title-main">Nonresidential water use in the U.S.</span>

Nonresidential water use refers to all uses of publicly-supplied (municipal) water other than residential use. The nonresidential users include industrial (I), commercial (C), and institutional (I) sub-sectors, which are often jointly designated as ICI or CII sector.

A low-flow fixture is a water saving plumbing fixture designed to achieve water savings by having a lower flow rate of water or a smaller quantity per flush. Some of these low-flow fixtures are faucets, showerheads, and toilets. In the United States a maximum water usage of conventional plumbing fixtures was federally mandated by the Energy policy act of 1992. Low-flow fixtures are designed to save water over conventional fixtures by having a lower flow rate while still maintaining satisfactory performance. The Environmental protection agency (EPA) WaterSense program has requirements for plumbing fixtures to achieve their definition for water saving low-flow.

References

  1. "Niagara's Innovative 0.8 gpf "Vacuum-Assist" Stealth Toilet". GreenBuildingAdvisor.com. 21 May 2010. Retrieved 2013-10-24.
  2. Nusca, Andrew (2010-06-11). "With vacuum assist, Niagara Conservation 'Stealth' toilet manages 0.8 gallons per flush". SmartPlanet. Retrieved 2013-10-24.
  3. "Quietly Efficient: The Niagara Stealth Toilet Delivers | Multi-Housing News Online". Multihousingnews.com. 2011-12-27. Retrieved 2013-10-24.
  4. "WaterSense Labeled Toilets | WaterSense | US EPA". Epa.gov. 2008-12-22. Retrieved 2013-10-24.
  5. 1 2 3 "All About Toilets - 2005-04-14 04:00:00". Interior Design. Retrieved 2013-10-24.
  6. "WaterSense Awards". 23 January 2017.
  7. "Archived copy" (PDF). Archived from the original (PDF) on 2012-01-10. Retrieved 2012-03-23.{{cite web}}: CS1 maint: archived copy as title (link)
  8. Mesenbrink, John (2009-02-01). "Free toilets and rebate programs save Austin water and money | Bath/Kitchen content from Contractor Magazine". Contractormag.com. Retrieved 2013-10-24.
  9. 1 2 "Making the world and your wallet a greener place". Austin Auditors. Retrieved 2013-10-24.
  10. "Welcome to the City of Fort Worth, Texas". Fortworthtexas.gov. Retrieved 2013-10-24.
  11. "Pre-Rinse Spray Valve Performance Summary" (PDF). fishnick.com. 11 August 2004. Retrieved 2013-10-24.
  12. 1 2 "Elisnore Valley Municipal Water District Harnesses World's Most Water Efficient Toilets to Save Customers, the District, and Nature". Csda.net. Retrieved 2013-10-24.
  13. "LEAKING MONEY NO LONGER: Boys and Girls Club gets water saving overhaul". MontereyHerald.com. 2012-02-29. Retrieved 2013-10-24.
  14. Cal Water Announces Rollout of Free Toilet Delivery Program accessed 27 Apr 2016