HN 500 Bengali | |
---|---|
Role | Two seat light aircraft |
National origin | France |
Designer | Henri Nicollier |
First flight | 9 June 1988 |
Number built | 1 |
The Nicollier HN 500 Bengali is a single engine French light aircraft built in France in the 1980s. It seats two in side-by-side configuration. Only one was built, flying for the first time in 1988; it remains active with a French preservation group.
The Bengali is a conventionally laid out, all wood, cantilever low wing monoplane with side by side seating. The wing has a single spar and is made in one piece; its leading edge and part of the root is skinned with plywood and the whole wing, including the ailerons and two position flaps covered with Dacron. Dihedral is constant over the span and there is 2.16° of washout. The wing is tapered in plan with less sweepback outboard. [1]
Apart from a glass fibre engine cowling the fuselage is a trapezoidal cross-section semi-monocoque with plywood stressed skin and rounded dorsal decking. The Bengali's side-by-side cabin, fitted with dual controls, is accessed via two upward opening, centrally hinged transparent sections. There is baggage space behind the seats. The swept fin is an integral part of the fuselage and the tailplane, set at mid-fuselage height, is of the semi-all-moving type with automatic tabs on both trailing edges. [1]
The Bengali is powered by a 75 kW (100 hp) Rolls-Royce built Continental O-200 flat four piston engine driving a fixed pitch propeller. The main fuel tank, holding 67 L (14.8 Imp gal) is in the fuselage under the baggage space, with more fuel held in a pair of leading edge wing tanks. It has a fixed tricycle undercarriage. The mainwheels have hydraulic brakes and the nosewheel is self centring though not steerable. [1]
The Bengali first flew on 9 June 1988, [2] though construction was "nearing completion" in early 1981. [1] Only one was built as Nicollier chose at an early stage not to sell plans. [1] [3] Shortly after its first flight this aircraft, F-PXHN, attended the RSA Internal held at Moulins-Montbligny between 29 and 31 July 1988. [4] It later became F-PFHN and is currently (2012) with the Groupement pour la Préservation du Patrimoine Aéronautique (GPPA) at the Musée Regional de l'Air, Angers [5] remaining in flying condition. [6]
Data from Jane's All the World's Aircraft 1981/82 [1] All performance figures estimated at maximum take-off weight.
General characteristics
Performance
Avionics
VFR standard
The Bartel BM 2, originally Bartel M.2 was a Polish biplane primary trainer aircraft prototype of 1926.
The Darmstadt D-22 was a sports-plane of Germany, designed and built by Akaflieg of Technische Universität Darmstadt.
The Isaacs Spitfire is a single seat homebuilt sporting aircraft design created by John O. Isaacs, a former Supermarine employee and retired schoolmaster and designer of the Isaacs Fury, as a 6/10th scale replica of a Supermarine Spitfire. Its first flight was on 5 May 1975.
The Civil Aviation Department Revathi was a light utility aircraft designed in India principally for use by that country's flying clubs.
The Gatard Statoplan AG 02 Poussin was a light, single-seat sports airplane developed in France in the late 1950s and marketed for homebuilding. In layout, it was a low-wing cantilever monoplane of short-coupled design with fixed tailwheel undercarriage. Construction was a plywood-covered wooden structure throughout, and the cockpit was enclosed by a large perspex bubble canopy. The variable-incidence horizontal stabiliser was fitted with small endplates to provide extra directional stability but there were no separate elevators.
The RWD 16bis and RWD 21 were Polish two-seat low-wing touring and sports planes of the late 1930s, constructed by the RWD bureau, sharing the same construction, main difference of the RWD 21 being a stronger engine.
The RWD-19 was a Polish two-seat low-wing sports aircraft of 1938, constructed by the RWD bureau.
The I.S.T. L-17 Masang was a two-seat, single engine, low wing monoplane aircraft designed and built in the Philippine Republic in the mid-1950s. It was intended for both touring and training.
The Kieger AK3 is conventionally laid out single engine, tractor configuration, low wing two seat light aircraft built in France from 2006. At least two have flown.
The Swift Aircraft Swift is a single engine, conventional light aircraft, seating two in side-by-side configuration. It is being developed in the UK but has yet to fly.
The Timm T-840 was a twin engine, high wing passenger aircraft designed and flown in the United States in 1938. Equipped with a tricycle undercarriage and low speed aerodynamic devices, it could be configured to carry between six and ten passengers. Only one was built.
The Aviamilano F.14 Nibbio is a four-seat, single engine cabin monoplane built in Italy in the late 1950s. Only ten production aircraft were completed.
The Civil Aviation Department MG-1 was a one-off Indian motor glider, seating two side by side and first flown in 1983.
The Sud-Est or SNCASE SE-2100, sometimes known as the Satre SE-2100 after its designer, was a tailless, pusher configuration touring monoplane with a single engine and cabin for two. Only one was built.
The Féré F.3 is a single engine, single seat French sports plane, amateur designed and built in the 1980s. Only one was completed.
The Coupé-Aviation JC-01 is the first of a series of very similar designs of two seat, single engine sports aircraft, amateur built from plans in France from 1976. These provided a range of engine sizes and undercarriage layouts, but total production was small.
The Merville D.63 was a modification of the Druine D.62 Condor with a nosewheel undercarriage, modified fin and French engine. It flew in 1962.
The Chasle LMC-1 Sprintair is an all-metal, single-seat sports light aircraft designed in France in the early 1970s and intended to be built by aero clubs from plans.
The Coelho AC-11 is a Brazilian homebuilt aircraft that was designed and produced by Altair Coelho of Eldorado do Sul and introduced in 1994. The aircraft was intended to be supplied as a kit for amateur construction, but only one was completed.
The Marc Parrot, named after the Punta Parrot peak in the Monte Rosa Massif, was specifically designed to fly into unprepared fields and mountain landing strips. The prototype first flew in 2013 but no more had been completed by about 2015.
{{cite journal}}
: Missing or empty |title=
(help)