Nieuport London

Last updated

London
RoleBomber
Manufacturer Nieuport & General Aircraft
Designer Henry Folland
First flight13 April 1920
Statusabandoned prototype
Number built2

The Nieuport London was a British night bomber aircraft designed in the First World War. A twin-engined triplane, the London was dogged by the unavailability and unreliability of its engines, and did not fly until 1920. Only two were built.

Contents

Development and design

In 1918, Henry Folland, chief designer of the Nieuport (England) Ltd (later to become the Nieuport & General Aircraft Co Ltd.), formerly of the Royal Aircraft Factory and designer of the S.E.5, designed the Nieuport London to meet the RAF Type VII specification for a night bomber, an order for six Londons was placed in July 1918. [1]

The London was a twin-engined triplane with equal span, two-bay wings, powered by the new ABC Dragonfly radial engine. It was designed for ease of production, and was built of wood with use of metal fittings minimised. The angular fuselage was covered by ¼ inch (6 mm) thick wooden boarding joined by Tongue and groove joints, techniques more usually found in furniture manufacture. The fabric covered wings were unstaggered and had ailerons fitted to each wing, while the tail unit had a prominent ventral fin similar to that fitted to Folland's S.E.5 and Nighthawk fighters. Bombload was 2,250 lb (1,023 kg), while as the London was solely intended to operate by night, defensive armament was limited to a pair of Lewis guns in the nose. [2] [3]

The end of the First World War meant that the needs of the RAF for heavy bombers could be met by the existing Vickers Vimy, and the last four Londons were cancelled in December 1918. Despite the great expectations placed on the Dragonfly, which had been ordered into large scale production prior to testing being carried out, and formed the powerplant for many of the types planned to equip the Royal Air Force of 1919, the engine was disappointing, with the prototype Londons being delayed by many months before engines were delivered, with the first eventually flying on 13 April 1920, followed by the second in July. [4] Despite its simple structure and angular lines, handling proved excellent, it being possible to remove the ailerons from the lower two sets of wings while not adversely affecting control. Although Folland had designed a civil transport version capable of carrying 13 passengers or heavy loads of cargo or mail, Nieuport and General closed down in August 1920, ending development of the London. [2]

Specifications

Data from The British Bomber since 1914 [4]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Hawker Harrier</span> Experimental biplane torpedo bomber aircraft built by Hawker Aircraft

The Hawker Harrier was an experimental biplane torpedo bomber aircraft built by Hawker Aircraft to a specification issued in the 1920s for the RAF.

<span class="mw-page-title-main">Vickers Vimy</span> Type of aircraft

The Vickers Vimy was a British heavy bomber aircraft developed and manufactured by Vickers Limited. Developed during the latter stages of the First World War to equip the Royal Flying Corps (RFC), the Vimy was designed by Reginald Kirshaw "Rex" Pierson, Vickers' chief designer.

Vickers Virginia Type of aircraft

The Vickers Virginia was a biplane heavy bomber of the British Royal Air Force, developed from the Vickers Vimy.

<span class="mw-page-title-main">Avro 549 Aldershot</span> Type of aircraft

The Avro 549 Aldershot was a British single-engined heavy bomber aircraft built by Avro.

<span class="mw-page-title-main">Tarrant Tabor</span> Type of aircraft

The Tarrant Tabor was a British triplane bomber designed towards the end of the First World War and was briefly the world's largest aircraft. It crashed, with fatalities, on its first flight.

<span class="mw-page-title-main">Airco DH.11 Oxford</span> Type of aircraft

The Airco DH.11 Oxford was a British twin-engined biplane bomber which was designed to replace the earlier Airco DH.10 Amiens. It was designed to use the unsuccessful ABC Dragonfly engine and was abandoned after the first prototype was built.

Handley Page Hyderabad 1923 bomber aircraft by Handley Page

The Handley Page H.P.24 Hyderabad was a twin-engine biplane heavy bomber designed and produced by the British aircraft manufacturer Handley Page. It holds the distinction of being the last wooden heavy bomber to be operated by the Royal Air Force (RAF).

Gloster Nightjar Type of aircraft

The Nightjar was a British carrier-based fighter aircraft of the early 1920s. It was a modification of the earlier Nieuport Nighthawk fighter produced by Gloster after the Nieuport & General company, which designed the Nighthawk, closed down. Twenty-two were converted, serving with the British Royal Air Force from 1922 to 1924.

<span class="mw-page-title-main">Gloster Sparrowhawk</span> Type of aircraft

The Gloster Sparrowhawk was a single-seat fighter aircraft designed and produced during the early 1920s by the British aircraft manufacturer Gloster.

<span class="mw-page-title-main">Airco DH.3</span> Type of aircraft

The Airco DH.3 was a British bomber aircraft of the First World War. The DH.3 was designed in 1916 as a long-range day bomber by Geoffrey de Havilland, chief designer at the Aircraft Manufacturing Company. It was a large biplane with wide-span three-bay wings, slender fuselage, and a curved rudder. It was powered by two 120 hp (89 kW) Beardmore engines, mounted as pushers between the wings. In addition to tailskid landing gear, two wheels were placed under the nose to prevent it from tipping over on the nose.

Nieuport Nighthawk Type of aircraft

The Nieuport Nighthawk was a British fighter aircraft developed by the Nieuport & General Aircraft company for the Royal Air Force towards the end of the First World War. Although ordered into production before the aircraft first flew, it did not enter large scale service with the RAF owing to unreliable engines. Re-engined aircraft did see service in Greece, serving from 1923 to 1938.

The Nieuport B.N.1 was a prototype British single-engined fighter aircraft of the First World War. It was a single-engined biplane intended to replace the Sopwith Camel, but only one was built, being destroyed in a crash. The Sopwith Snipe was built instead to replace the Camel.

The Boulton & Paul P.7 Bourges was a prototype British twin-engined biplane day bomber built by Boulton & Paul to replace the Airco DH.10 Amiens. Despite demonstrating excellent performance and manoeuvrability, only three prototypes were built, post World War I cost cutting leading to the DH.10 not being replaced.

The Sopwith Snapper was a prototype British fighter aircraft of the First World War. A single-engined biplane designed by the Sopwith Aviation Company to replace the Sopwith Snipe fighter, it first flew after the end of the war, but did not enter service owing to the failure of its engine, only three aircraft being built.

<span class="mw-page-title-main">BAT Basilisk</span> Type of aircraft

The BAT F.K.25 Basilisk was a prototype British fighter aircraft of the First World War. A single engined biplane intended to meet a requirement to replace the Sopwith Snipe, the Basilisk was unsuccessful, only three being built.

The de Havilland DH.72 was a large British three-engined biplane bomber, designed as a Vickers Virginia replacement. It did not go into production.

The Sopwith Snark was a British prototype fighter aircraft designed and built towards the end of the First World War to replace the RAF's Sopwith Snipes. A single engined triplane, the Snark did not fly until after the end of the war, only three being built.

Parnall Possum Type of aircraft

The Parnall Possum was an experimental triplane, with a single, central engine driving wing-mounted propellers via shafts and gears. Two of these British aircraft were built in the mid-1920s.

The Sopwith Cobham was a British twin-engined triplane bomber aircraft designed and built by the Sopwith Aviation Company during the First World War. The only twin-engined aircraft built by Sopwith, the Cobham did not fly until after the end of the war, and was unsuccessful due to the failure of its engines, only three prototypes being built.

<span class="mw-page-title-main">Sopwith Rhino</span> British WW1 triplane bomber aircraft

The Sopwith 2B2 Rhino was a British two-seat triplane bomber designed and built by Sopwith Aviation Company as a private venture. The Rhino was powered by a 230 hp (172 kW) Beardmore Halford Pullinger inline piston engine. Only two aircraft were built and the type did not enter production.

References

  1. Mason 1994, p.124.
  2. 1 2 Bruce 1957, p.321.
  3. Lewis 1974, pp.109-110.
  4. 1 2 Mason 1994, p.125.
  5. 1 2 3 4 5 Flight 2 December 1920, p.1239.
  6. Flight 2 December 1920, p.1238.