Noblessner (also known as Peetri sadam) is a harbour and former industrial area in the northern district of Tallinn, Estonia. Since 2013 it has been redeveloped into a cultural and residential area with a museum, art centre, craft brewery, marina, seafront promenade and cafes and restaurants.[1][2][3][4]
The factory built a total of 12 modern submarines in Noblessner between 1913 and 1917.[5] An order for an additional 20 ocean submarines came in 1916, but due to the 1917 October Revolution, they never started making them. After Estonian independence in 1918 the shipyard started manufacturing smaller vessels instead of submarines. In 1925 the shipyard declared bankruptcy due to the lack of orders, and smaller enterprises also involved in shipbuilding divided the buildings among themselves. The various enterprises merged at the beginning of the Soviet occupation. In 1944–1951 the shipyard operated as Tallinn Marine Factory (Tallinna Meretehas) and it repaired the Baltic Fleet’s minesweepers. Over the following decades, the shipyard was renamed Marine Factory No. 7 and Shipyard No. 7. The company built vessels for the Soviet Navy and repaired whaling vessels and fishing trawlers. In 1991, when Estonia restored its independence, the shipyard became the Tallinn Marine Factory again. The last vessels were built in 2018.[1]
Buildings of Noblessner
Today, many of the historic industrial buildings in Noblessner have found new life through repurposing and rehabilitation. Constructed primarily in the 1910s, the buildings of Noblessner represent typical industrial design from the era.
Administration building (Tööstuse 48)
The two-story building located at Tööstuse 48 served the administrative needs of the Noblessner factories. Designed by architect V. Sakharov and completed in 1914, it features a number of Art Nouveau elements.[6]
Shipyard Ship Systems Production Facility (Peetri 12)
Noblessner’s Ship Systems Workshop, a typical industrial building for its era, operates today as the KAI art center.[7] Constructed in 1916, the building has a unique convex roof with a small triangular roof lamp running along the ridge that allows natural light into the building.[8] Windows punctuate the building’s façade, covering about half of the surface. While the building retains a number of features from its original construction, since 2019 it has focused on showcasing contemporary art and providing a cultural center for everyone in Noblessner to enjoy.
Shipyard and foundry (Tööstuse 48)
Noblessner Shipyard's foundry chimney, 2014
Engineering company Christiani & Nielsen helped design the Noblessner foundry. The building also included a one-story boiler house half-buried the ground, covered with sheet metal, and bridged with concrete arches. The boilers were heated in a workshop and steam was supplied to the smithy furnaces.[9]
Noblessner foundry 2019
In October 2019, Proto invention factory opened the foundry doors as a family-friendly center where people can explore unique inventions and technological innovations.[10] In addition to exhibits, the good acoustics of the space make it well-suited for a variety of cultural events. Since 2009 there have been different orchestra concerts, some of them conducted by Tõnu Kaljuste, and all of Arvo Pärt’s and Heino Eller’s symphonies have been played there.[11]
Shipyard Non-Ferrous Metal Foundry Chimney (Peetri 10)
An example of industrial architecture from the beginning of the 20th century, the foundry chimney belongs to the ensemble of factory buildings. The chimney and its plinth are stacked in red bricks and supported by a traction belt and exterior climbing and resting irons. The upper part of the chimney slopes slightly towards the foundry, with an ornamental peak at the top. The chimney was built between 1914 and 1915 along with the foundry building. As with the foundry, engineering company Christiani & Nielsen contributed to the chimney design.[12]
Shipyard Assembly Plant (Peetri T2)
Architect V. Sakharov designed this building, constructed 1914-1915 as part of the Noblessner submarine factory. The historicist style building has limestone exterior walls and metal truss roof structures. A production building has been built on the north-western façade, and there are two silicate brick building volumes on the south-eastern façade. In 1917, the factory was evacuated and the building was leased to port factories. In the early years of the Republic of Estonia, there was a warehouse here. After that, the building expanded. During the Soviet era, the factory continued to operate. It is currently empty, and in 2007 a new roof was laid on the building.[13]
Constructed along with the rest of the Noblessner factory in 1914-15, this building had the same architect as the Shipyard Assembly Plant, V. Sakharov. It features limestone exterior walls, round windows on the façade, and reinforcements on the sides.[14] In 1917, the factory was evacuated and the building was leased to port factories. From the Soviet era it continued to work. In 2018, the Estonian brewery Põhjala opened its doors in the building as a bar, a restaurant, and also a factory.
Warehouse (Peetri 11)
On the seafront of the former Noblessner and Peetri Tehas shipyard, near a split railway viaduct, is the factory’s materials warehouse. It is part of the complex of other historic buildings from the same factory. The foundation walls and exterior walls of the historicist-style two-story building are made of solid limestone. No original window frames or exterior doors have been preserved. A light lantern with a metal structure runs on the ridge for almost the entire length of the roof. The interior of the building has a reinforced concrete false ceiling, which is largely bridged by metal beams. The ceiling is supported by metal construction posts. The northern façade of the building features a bronze bas-relief of Adam Johann von Krusenstern (1770-1846). In 2014, the warehouse was renovated into an office building.
Railway Viaduct (Peetri T4)
The Noblessner railway viaduct with modern road running underneath.
The railway viaduct is part of the ensemble of the Noblessner shipyard, and a characteristic example of limestone functionalism. The viaduct is on the service route of the port of the Baltic Railway, built in 1870. It is probable that Sakharov, the main architect for Noblessner shipyard, was also involved in the design of the railway viaduct.
Initially, the width of the viaduct was 3.9 m, the width of the opening was 10.2 m, and the height was 5.01 m. Loads receiving the slope were formed by a monolithic concrete cabinet surrounded by limestone masonry. The cement-mortar-based limestone masonry surrounding the sloping columns gave the viaduct an architectural identity. The masonry that has survived to this day is made of limestone, and the cornerstones have a smooth finish. The limestone retaining walls that secured the earthen cones against the sloping masonry have also been preserved.
The Noblessner viaduct, completed in 2015, is built over the slopes of the old viaduct. The new viaduct has a total width of 15 m, it consists of two 3.25 m wide lanes, a 4.5 m wide light traffic road on the south side and a 2 m wide sidewalk on the north side. The earth cones surrounding the old sloping columns have been removed if necessary for the installation of the new structure. The cones have been replaced by convex gradually converging gabions. The rest of the slope surrounding the viaduct is covered with paving stones. At the bottom of the gabions, the old limestone masonry has been preserved.
In 1997, the railway bridge was repaired according to a project prepared in 1994. During this process, the metal structure of the opening building was replaced with a reinforced concrete structure of the same length. At the time of the reconstruction, the railway line was preserved. By 2011, the railway viaduct had been rebuilt into a light traffic bridge as part of the Culture Kilometer. In 2012, the design of Kalaranna Street was started, in 2015, the Noblessner viaduct was completed.[15]
The Noblessner power plant with its chimney in the background
Power Plant with Chimney (Peetri 7)
The power plant was built in 1914-1915. It is a historic-style three-story building with limestone exterior walls. The facades have large rectangular windows with reinforced concrete pavements, the southwest facade has the original high arched windows. There is also a silicate brick staircase and a gallery that connects to the outbuilding. Near the northern corner of the building rises a red brick chimney with an ornamented top. The building was designed by architect V. Sakharov. In 1917, the factory was evacuated and the building was leased to port factories. In Soviet times, it was partly made a canteen.[16]
Water Tower and Residential Building (Tööstuse 46)
The water tower of Noblessner
The building consists of a two-story residential building with a gable roof on the street side and an initially three-story water tower with a volume floor added during the Soviet era.
In 1913, when a submarine factory was planned on this plot, administrators envisaged cooperation of the new plant with the older "Volta" plant across the road. The factory buildings were completed in 1914-1915, and the name of the architect or chief engineer is unknown. In 1917, a large portion of the internal equipment was sent to Russia. During the Republic of Estonia era, the “Noblessner” plot was used by small industries. During the Soviet occupation, the factory was the Tallinn Naval Factory of the USSR Navy. In the 1960s and 1970s, a cubic addition was built on the water tower-residential tower. After the independence of Estonia, the plot of the factory was taken over by AS Tallinna Meretehas, which went bankrupt in 2001. A creative city is now planned for the plot, and the water tower-residential building has been restored.[17]
Modern Residential Buildings (Staapli 3, Staapli 12 and Peetri 11)
Modern buildings in Noblessner, Staapli 3, PLUSS Architects
The modern real estate buildings were built in 2017-2018 by PLUSS architects. The project developers were BLRT Grupp in cooperation with Merko Ehitus; some of the projects are still in process, like Vesilennuki. These residential and commercial buildings are the nearest ones to the sea in Estonia.[18]
Related Research Articles
The Kumu Art Museum is an art museum in Tallinn, Estonia. It is one of the largest museums in Estonia and one of the largest art museums in Northern Europe. It is one of the five branches of the Art Museum of Estonia, housing its main offices.
Tallinn University is a public research university in Estonia. Located in the centre of Tallinn, the capital city of Estonia, Tallinn University is one of the three largest institutions of higher education in the country. Both QS World University and Times Higher Education rankings place it among the top 1000 universities in the world.
Kehra is a town in Anija Parish, Harju County, Estonia, most known for its pulp and paper mill.
The Black Sea Shipyard is a shipbuilding structure located in Mykolaiv, Ukraine. It was founded in 1895 by Belgian interests and began building warships in 1901. At the beginning of World War I in 1914, it was one of the largest industrial facilities in the Russian Empire. The shipyard was moribund until the Soviets began building up the fleet in the 1930s and it began building surface warships as well as submarines. The yard was badly damaged during World War II and took several years to be rebuilt. Surface warship construction temporarily ended in the mid-1950s before being revived in the mid-1960s and submarines were last built in the yard in late 1950s. The Black Sea Shipyard built all of the aircraft carrying ships of the USSR and Russia and continues to build large commercial ships.
Põhja-Tallinn is one of the 8 administrative districts of Tallinn, the capital of Estonia.
Raasiku is a borough in Raasiku Parish, Harju County, Estonia, with a population of 1,372 (2020). Although situated in a parish with the same name, Raasiku is not the official administrative centre of the municipality. The settlement started to grow in the 19th century around the railway station. The Raasiku manor was established on the grounds of the earlier Kaemla (Keamol) village and in the middle ages it belonged to Padise Abbey.
EML Lembit is one of two Kalev-class mine-laying submarines built for the Republic of Estonia before World War II, and is now a museum ship in Tallinn. She was launched in 1936 at Vickers-Armstrongs, Barrow-in-Furness, and served in the Estonian Navy and the Soviet Navy. Until she was hauled out on 21 May 2011, Lembit was the oldest submarine still afloat in the world. Her sister ship, Kalev, was sunk in October 1941.
German submarine U-479 was a Type VIIC U-boat built for Nazi Germany's Kriegsmarine for service during World War II. She was laid down at the Deutsche Werke in Kiel on 19 November 1942 as yard number 310, launched on 14 August 1943 and was commissioned on 27 October 1943 with Oberleutnant zur See Hans-Joachim Förster, a Knights Cross winner, in command. He was replaced shortly afterwards by Oberleutnant Friedrich-Wilhelm Sons.
Freedom Square is a plaza on the southern end of the Old Town in Tallinn, Estonia, where state functions and various concerts take place. It is bounded on the east by St. John's Church, on the south by Kaarli Boulevard and an underground shopping center (2008–09), and on the west by a Victory Column (2009) commemorating the Estonian War of Independence 1918–1920.
The Tallinn Town Hall is a building in the Tallinn Old Town, Estonia, next to the Town Hall Square. It is the oldest town hall in the whole of the Baltic region and Scandinavia.
Estonian Maritime Academy of Tallinn University of Technology is a vocational university in Estonia. It is one of the schools of Tallinn University of Technology and it is the only educational institution in Estonia that offers professional higher education and Master’s level education in the maritime field. The university is located in the capital Tallinn but also has two centres in Saaremaa. In addition to higher education, the school contributes to research, provides training and offers services. The Academy also holds a one of a kind Simulator Centre and has a whole dedicated floor of hi-tech laboratories.
Suur Tõll is an Estonian steam-powered icebreaker preserved in the Estonian Maritime Museum in Tallinn. She was originally built for the Russian Empire in 1914 by AG Vulcan in Stettin, Germany, as Tsar Mikhail Feodorovich. In 1917, she was taken over by the Bolsheviks and renamed Volynets. However, in 1918 she was captured by Finland and served as Wäinämöinen until 1922, when she was handed over to Estonia according to the Treaty of Tartu and renamed Suur Tõll. When Estonia was occupied by the Soviet Union in 1940, the icebreaker rejoined the Soviet fleet and was again named Volynets. She remained in service until 1985.
The Tallinn Power Plant is a former power plant located in Tallinn, Estonia. Construction of the power plant was initiated by Volta company and it was decided by the Tallinn City Council in 1912 after the work of special committee established in 1909. The plant was located next to the Tallinn Gas Factory at the location of the former Stuart fortress. The plant was designed by Volta and the architect was Hans Schmidt. Originally it used three Laval-type 250 horsepower (0.19 MW) steam turbines and three 250 horsepower (0.19 MW) electric generators—all produced by Volta. Two coal-fired boilers were manufactured by AS Franz Krull. The power plant was opened on 24 March 1913 and originally it was fired by coal. In 1919–1920 the plant was expanded and transferred to peat and wood. In 1924 the power plant was switched to oil shale. It was the first power plant in the world to employ oil shale as its primary fuel. In 1939, the plant achieved capacity of 22 MW.
Stenbock House is a prominent neo-classical building located on Toompea hill, Tallinn. It is the official seat of the Government of Estonia.
Ain Padrik is an Estonian architect.
Villa Jacoby is a 1920s home in Estonian architecture. It is known for baroque-style windows and influences of expressionism and Estonian traditional architecture. The house is located on Wismari street 11, which is the beginning of the Old Town of Tallinn.
Voldemar Lender was an Estonian engineer who was the mayor of Tallinn from 1906 to 1913, notably being the first ethnic Estonian to become the mayor of Tallinn.
Tõnu Mellik was an award-winning Estonian architect active in the mid-twentieth century.
Reopalu Cemetery is a cemetery in Paide, Estonia.
Pärnu Alevi Cemetery is a cemetery in Pärnu, Estonia.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
