PVAR rifle

Last updated
Pneumatic Valve and Rod rifle
Type Assault rifle, Battle rifle
Place of origin Philippines
Service history
Used by Armed Forces of the Philippines, Special Operations Command (Philippines) [1] [2]
WarsAnti-guerilla operations against the New People's Army, Moro Islamic Liberation Front, Abu Sayyaf, Operation Enduring Freedom - Philippines, War in Afghanistan, International Peace Support and Humanitarian Relief Operations, UN Operation[ citation needed ]
Production history
Designed2009
Manufacturer United Defense Manufacturing Corporation
Produced2009-present
Specifications
Cartridge 5.56×45mm NATO
7.62×51mm NATO
Action Proprietary Gas-operated long-stroke piston, rotating bolt
Feed systemVarious STANAG magazines, Beta C Mag
Sights Iron sights, Red-dot sights, Optical sights

UDMC PVAR rifles are Filipino variants of the Armalite AR-15 and AR-10, using the Pneumatic Valve and Rod system manufactured by United Defense Manufacturing Corporation.

Contents

The Pneumatic Valve and Rod system was created to be a more reliable alternative to the Stoner bolt and carrier piston system used in the AR-15 family, commonly but incorrectly referred to as a direct impingement system.

History

United Defense Manufacturing Corporation undertook the development of the rifle as a possible replacement for traditional AR-15 designs. Philippine Letters of Patent Nos. 1-2009-000176 and 1-2011-000062 were issued in 2009 and 2011, respectively.[ citation needed ]

Design

The PVAR system was designed in an attempt to reduce malfunctions by preventing the buildup of heat, lead and copper fouling inside the receiver by utilizing mechanical energy instead of the pressurized gases of the cartridge to cycle the bolt, the process by which a round of ammunition is fired, ejected, and a new round is loaded. Instead of a hollow gas tube, it uses a one piece bolt carrier with a piston rod which transfers the energy of the gas produced by the round and pushes the bolt carrier rearwards. The manufacturer advertises that the PVAR system reduces the need for field maintenance and overall wear and tear compared to the standard AR-15 design.

Unlike many gas piston systems, the PVAR features a free-floating piston rod that, upon firing, travels rearward and essentially increases the mass of the bolt carrier group during most of the firing cycle in order to reduce recoil. The manufacturer states that this system is compatible with barrel twists of 1:7, 1:9, and 1:12, as well as M193 and M855 ammunition. Compared to a standard AR-15, the PVAS rifle has a slower rate of fire of around 750rpm due to the increased effective mass of the bolt carrier group when firing. The bolt head is milled from Carpenter 158 steel and the Bolt Carrier Groups are made of AISI 8620 steel.

PVAR rifles are installed with one-piece free-floated M1913 quad rail handguards made of 7075-T6 aluminum mounted on a matching proprietary barrel nut. UDMC states that the PVAR system is designed to be easily removed from the front of the gas block, and does not require removal of the handguard to access the gas system for cleaning or repairs.

UDMC offers the PVAR System on four series of rifles: the F5/F7-PVAR and the S5/S7-PVAR. The “F-series” models are fully automatic, and “S-series” rifles are semi-automatic. The PVAR system is offered as F5/S5 variants of the M16 and M4 in 5.56 NATO with barrel lengths from 7.5" and 22", and also available as F7/S7 variants of the M110 in 7.62×51mm with barrels starting at 14.5" up to 25". Three barrel types are available: black Parkerized 4150 carbon steel, matte finish SS-410 stainless steel, and AISI-416 supplied by Dikar S. Coop BERGARA of Spain. All barrels are threaded to accept standard AR muzzle devices. Accuracy is claimed to be 1 MOA from the factory.

A mil-spec single stage trigger comes standard with an optional two-stage trigger available for semi-auto precision use. [3] [4]

See also

Related Research Articles

<span class="mw-page-title-main">IMI Galil</span> Family of Israeli automatic rifles

The IMI Galil is a family of Israeli-made automatic rifles chambered for the 5.56×45mm NATO and 7.62×51mm NATO cartridges. Originally designed by Yisrael Galili and Yakov Lior in the late 1960s, the Galil was first produced by the state-owned Israel Military Industries and is now exported by the privatized Israel Weapon Industries.

The La France M16K is an M16 rifle modified by the company La France Specialties, which among with other firearm-related activities, convert common military weapons into more compact configurations typically for law enforcement and special forces use.

<span class="mw-page-title-main">Direct impingement</span> Type of gas operation for a firearm

Direct impingement is a type of gas operation for a firearm that utilizes gas from a fired cartridge to impart force on the bolt carrier or slide assembly to cycle the action. Firearms using direct impingement are theoretically lighter, more accurate, and less expensive than firearms using cleaner and cooler gas piston systems.

<span class="mw-page-title-main">ArmaLite AR-10</span> Battle rifle

The ArmaLite AR-10 is a 7.62×51mm NATO battle rifle designed by Eugene Stoner in the late 1950s and manufactured by ArmaLite. When first introduced in 1956, the AR-10 used an innovative combination of a straight-line barrel/stock design with phenolic composite, a new patent-filed gas-operated bolt and carrier system and forged alloy parts resulting in a small arm significantly easier to control in automatic fire and over 1 lb (0.45 kg) lighter than other infantry rifles of the day. Over its production life, the original AR-10 was built in relatively small numbers, with fewer than 10,000 rifles assembled. However, the ArmaLite AR-10 would become the progenitor for a wide range of firearms.

The ArmaLite AR-18 is a gas-operated assault rifle chambered for 5.56×45mm NATO ammunition. The AR-18 was designed at ArmaLite in California by Arthur Miller, Eugene Stoner, George Sullivan, and Charles Dorchester in 1963 as an alternative to the Colt AR-15 design, a variant of which had just been selected by the U.S. military as the M16. A semi-automatic version known as the AR-180 was later produced for the civilian market. While the AR-18 was never adopted as the standard service rifle of any nation, its production license was sold to companies in Japan and the United Kingdom, and it is said to have influenced many later weapons such as the British SA80, the Singaporean SAR-80 and SR-88, the Belgian FN F2000, the Japanese Howa Type 89 and the German Heckler and Koch G36.

vz. 58 Czechoslovakian rifle

The vz. 58 is a 7.62×39mm assault rifle that was designed and manufactured in Czechoslovakia and accepted into service in the late 1950s as the 7,62 mm samopal vzor 58, replacing the vz. 52 self-loading rifle and the 7.62×25mm Tokarev Sa 24 and Sa 26 submachine guns.

<span class="mw-page-title-main">Stoner 63</span> NATO modular weapon system

The Stoner 63 is a 5.56×45mm NATO modular weapon system. Using a variety of modular components, it can be configured as an assault rifle, carbine, top-fed light machine gun, belt-fed squad automatic weapon, or as a vehicle mounted weapon. Also known as the M63, XM22, XM23, XM207 or the Mk 23 Mod 0 machine gun, it was designed by Eugene Stoner in the early 1960s. Cadillac Gage was the primary manufacturer of the Stoner 63 during its history. The Stoner 63 saw very limited combat use by US military units during the Vietnam War. A few were also sold to law enforcement agencies.

The Z-M LR-300 is an American select-fire assault rifle designed by gunsmith Allan Zitta and manufactured by Z-M Weapons. The model name LR-300 stands for Light Rifle and 300 is for 300 meters, which is regarded by the manufacturer as the effective range of the rifle with a standard 55 gr (3.6 g) FMJ bullet. The design is based on the AR-15, M16 and C7 rifles, but has a unique semi-direct gas impingement system and a folding stock option.

<span class="mw-page-title-main">SR-25</span> Designated marksman rifle

The SR-25 is a designated marksman rifle and semi-automatic sniper rifle designed by Eugene Stoner and manufactured by Knight's Armament Company.

The Robinson M96 is a 5.56 x 45mm NATO, semi-automatic rifle based on the Stoner 63 Modular Weapon System. Made by the Robinson Armament Co., the M96 can be arranged in a variety configurations from a standard rifle with a 20' barrel, to a carbine with a 16" barrel or even a top-fed carbine with a 17.5" barrel.

The Colt Automatic Rifle or Colt Light Machine Gun is a 5.56 mm NATO, open-bolt, full-automatic-only firearm developed by Colt Defense. It is based on the M16A2/A4, and has a distinctive squared-off handguard, vertical grip, carrying handle and integrated bipod.

<span class="mw-page-title-main">Barrett REC7</span> Semi-automatic rifle, Assault rifle (Full auto/Select fire version)

The Barrett REC7 is an American firearm manufactured as a selective-fire fully-automatic and semi-automatic rifle by Barrett Firearms. It is an M4 carbine utilizing a short-stroke gas piston system and is available in either 5.56×45mm NATO or 6.8mm Remington SPC. The REC7 is Barrett's second AR-pattern rifle chambered for the 6.8mm Remington SPC cartridge, the first being the Barrett M468 rifle. The 6.8 SPC-chambered M468 rifle employed the same Stoner expanding gas system as the M4.

<span class="mw-page-title-main">T65 assault rifle</span> Assault rifle

The T65 is an assault rifle developed and manufactured by the Combined Logistics Command of the Republic of China (Taiwan) Armed Forces in Taiwan. Originally patterned after the Armalite AR-18 that has a short-stroke gas system, the prototype unveiled in 1975 showed a rifle that is heavily influenced by the AR-15 family of rifles, albeit with modified iron sights, a reshaped stock, and redesigned handguards. The designated number '65' refers to the Year 65 of the Republic of China (Taiwan) (1976), the year the rifle's design was finalized.

The SG 550 is an assault rifle manufactured by SIG Sauer AG in Switzerland. "SG" is an abbreviation for Sturmgewehr. The rifle is based on the earlier 5.56×45mm NATO SIG SG 540.

The SG 540 is a 5.56×45mm NATO assault rifle developed in the early 1970s by Schweizerische Industrie Gesellschaft of Neuhausen, Switzerland as a private venture primarily destined for export markets and as a potential replacement for the 7.5×55mm Swiss SG 510 automatic rifle known as the Stgw 57 in Swiss service.

The SR-556 is a semi-automatic AR-15 style rifle manufactured by Sturm, Ruger & Co. The rifle was introduced in 2009 in .223 Remington/5.56×45mm NATO and as a .308 Winchester AR-10 variant in 2013, the SR-762. It is one of several AR-15 rifles to use a gas piston operation.

<span class="mw-page-title-main">SIG Sauer SIG516</span> Assault rifle (SIG516)

The SIG Sauer SIG516 is a sporting rifle manufactured by SIG Sauer, chambered in 5.56×45mm NATO.

<span class="mw-page-title-main">Adcor A-556</span> Assault rifle/carbine

The ADCOR A-556 is an assault rifle based on the M16/M4 series. It is produced by the Adcor Defense Company and was one of the contenders in the US Army Individual Carbine Competition to replace the M4 Carbine.

<span class="mw-page-title-main">Patriot Ordnance Factory</span> Weapon manufacturer in Arizona, United States

Patriot Ordnance Factory (POF-USA) manufactures and distributes law enforcement, military and civilian rifles in Phoenix, Arizona, and was the first manufacturer and seller of gas-piston-operated weapon systems on AR-style rifles in the United States.

<span class="mw-page-title-main">Kel-Tec RDB</span> Semi-automatic rifle

The Kel-Tec RDB is a bullpup carbine offered in 5.56×45mm NATO semi-automatic rifle, manufactured by Kel-Tec Industries of Florida. It uses a rotary bolt with a spring loaded ejector and an extractor facing down, ejecting spent shell casings downward, allowing easy ambidextrous use.

References

  1. Brigadier (Retd) Vinod Anand. "Small Arms Modernisation in South East Asia". SP Land Forces.
  2. Tulfo, Ramon. "Wake up, Mr. President!". Philippine Daily Inquirer . April 30th, 2012
  3. "Technology". United Defense Manufacturing Corp. Retrieved 2022-05-12.
  4. "The UDMC® Pneumatic Valve and Rod (PVAR) System". United Defense Manufacturing Corp. Retrieved 2022-05-12.