Close Quarters Battle Receiver

Last updated

Close Quarter Battle Receiver
M4A1-CQBR.png
Top: An M4A1 with SOPMOD Block 1 package, including Rail Interface System and Trijicon 4× ACOG. The barrel length is 14.5 inches (368 mm).
Bottom: An M4A1 with a Close Quarter Battle Receiver. The barrel length is 10.3 inches (262 mm).
Type Carbine
Place of originUnited States
Service history
In service2000–present
Used bySee M4 Carbine users
Wars War in Afghanistan
Iraq War
Production history
Designer Colt Defense
Daniel Defense [1]
Designed1999 [2]
Produced2000–present [3]
No. built10,000+
Specifications (CQBR)
Mass2.72 kg (6.00 lb)
Length762 mm (30.0 in) stock extended
679.4 mm (26.75 in) stock collapsed
Barrel  length262 mm (10.3 in)

Cartridge 5.56×45mm NATO
Action Gas-operated, rotating bolt
Rate of fire 700–950 round/min cyclic
Muzzle velocity 2,585 ft/s (788 m/s) [4]
Effective firing range300 m (328 yd)
Feed system20- or 30-round detachable STANAG magazine
Sights Iron sights and various SOPMOD sights

The Close Quarter Battle Receiver (CQBR) [5] is a replacement upper receiver for the M4A1 carbine developed by the US Navy.

Contents

The CQBR features a 10.3 in (262 mm) length barrel (similar to the Colt Commando short-barreled M16 variants of the past) which makes the weapon significantly more compact, thus making it easier to use in, and around, vehicles and in tight, confined spaces. The overall length of the upper receiver is 19.25 in (489 mm). With the stock collapsed, the overall length of the weapon is 26.75 in (679 mm). Those created as complete rifles (rather than only upper receivers) are type designated as Mk 18 MOD 0/1.

Special forces units utilize the CQBR for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations.

Its former preliminary National Stock Number (NSN) had been 1005-LL-L99-5996. A complete CQBR-equipped carbine now has the NSN 1005-01-527-2288.

Background

The M4 carbine and M16 are not ideally suited for all missions due to their relatively long barrels, but the modularity of AR pattern rifles allows the operator to easily replace the upper receiver. One of two proposed special mission receivers that were planned for inclusion into the SOPMOD Block II kit, the CQBR has taken off on its own. Like the proposed Special Purpose Receiver, the Close Quarters Battle Receiver has been more or less taken on by the Naval Surface Warfare Center Crane Division (often referred to as NSWC-Crane or just "Crane") as its own project following the CQBR's removal from the SOPMOD program. Just as the Special Purpose Receiver morphed into the Special Purpose Rifle, and was type-classified as Mk 12 MOD 0/1, the complete CQBR-equipped carbine has been type-classified as the Mk 18 MOD 0, or the Mk 18 MOD 1 with a sightless gas block and full-length accessory rail kit.

The purpose of the CQBR is to provide operators with a weapon of submachine gun size, but firing an intermediate cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. The CQBR is designed to provide improvement over previous AR-15/M16-type weapons in this category. The CQBR is usually issued as a complete weapon system, and not just an upper receiver. The CQBR was once only available to Naval Special Warfare units (and by extension, other US Special Operations Forces units), but the Mk 18 MOD 0 has become general issue for Visit, Board, Search, and Seizure (VBSS) missions and, as of 2006, for NCIS agents deploying to active combat zones.[ citation needed ] The Mk 18 is also used by the Coast Guard's Maritime Law Enforcement Specialists within both Deployable Specialized Forces and Tactical Law Enforcement Teams, as well as the United States Navy's Explosive Ordnance Disposal (EOD) Operators. It is also used by both Marine Force Recon Teams and Critical Skills operators from MARSOC, and is in most cases the standard weapons of choice for said operators where the range of an M4 is not necessary.

The short 10.3 in (262mm) barrel length requires special modifications to function reliably. The gas port is opened from 0.062 to 0.070 in (1.6 to 1.8mm). A one-piece McFarland gas ring replaces the three-piece gas ring set. The standard four-coil extractor spring is replaced with a commercial off-the-shelf (COTS) five-coil spring. An O-ring surrounds the extractor spring. The standard M4 flash hider has been replaced with the M4QD flash hider for suppressor compatibility.

Ballistic performance

Shortening the barrel by 50% from the original 20 inches (508 mm) pattern has a dramatic effect on the velocity of 5.56x45mm NATO ammunition. This has been demonstrated in studies using a Remington 700 bolt-action rifle, progressively shortened in barrel length and chronographed. With a 20" barrel, the bullet travels at a velocity of 3,071 ft/s (936 m/s), but this is reduced to 2,489 ft/s (759 m/s) at 10". [6]

Evolution

Specifications

Navy SEALs armed with CQBRs conduct Shoot House Training at Little Creek, Virginia in mid 2007. Each M4A1 CQBR is equipped with the Aimpoint CompM2 M68 Close Combat Optic, Knight's Armament QD suppressor and AN/PEQ-2. US Navy 070605-N-3642E-586 U.S. Navy SEALs (Sea, Air, Land) perform a live fire exercise for the Secretary of the Navy (SECNAV) The Honorable Dr. Donald C. Winter.jpg
Navy SEALs armed with CQBRs conduct Shoot House Training at Little Creek, Virginia in mid 2007. Each M4A1 CQBR is equipped with the Aimpoint CompM2 M68 Close Combat Optic, Knight's Armament QD suppressor and AN/PEQ-2.

See also

Related Research Articles

<span class="mw-page-title-main">M16 rifle</span> American assault rifle

The M16 rifle is a family of assault rifles adapted from the ArmaLite AR-15 rifle for the United States military. The original M16 rifle was a 5.56×45mm automatic rifle with a 20-round magazine.

<span class="mw-page-title-main">IMI Galil</span> Family of Israeli automatic rifles

The IMI Galil is a family of Israeli-made automatic rifles chambered for the 5.56×45mm NATO and 7.62×51mm NATO cartridges. Originally designed by Yisrael Galili and Yakov Lior in the late 1960s, the Galil was first produced by the state-owned Israel Military Industries and is now exported by the privatized Israel Weapon Industries.

<span class="mw-page-title-main">M4 carbine</span> American assault rifle

The M4 carbine is a 5.56×45mm NATO assault rifle developed in the United States during the 1980s. It is a shortened version of the M16A2 assault rifle.

The Colt Canada C7 and C8 are a Canadian family of service rifles, manufactured by Colt Canada, having similar design and function to the Colt M16A3.

<span class="mw-page-title-main">Knight's Armament Company</span> American firearms and firearms parts manufacturer

Knight's Armament Company (KAC) is an American firearms and firearms parts manufacturer, known for producing the Rail Interface System (RIS) and the Rail Adapter System (RAS) grips for firearms use. The company produces a variety of firearms, including AR-15-style rifles.

The La France M16K is an M16 rifle modified by the company La France Specialties, which among with other firearm-related activities, convert common military weapons into more compact configurations typically for law enforcement and special forces use.

<span class="mw-page-title-main">Mk 12 Special Purpose Rifle</span> Designated marksman rifle

The United States Navy Mk 12 MOD 0/1/H Special Purpose Rifle (SPR) is a designated marksman rifle that was in service with United States Special Operations Forces in the designated marksman role until 2017, also designed to be shorter than standard weapons. SPR initially stood for Special Purpose Receiver as it referred to an add-on upper receiver assembly, but that nomenclature changed to Special Purpose Rifle as the weapon became a stand-alone weapons system.

<span class="mw-page-title-main">CAR-15</span> Carbine of the United States

The Colt Automatic Rifle-15 or CAR-15 is a family of M16 rifle–based firearms marketed by Colt in the 1960s and early 1970s. However, the term "CAR-15" is most commonly associated with the Colt Commando ; these select-fire carbines have ultrashort 10.5-inch (270 mm) and 11.5-inch (290 mm) barrels with over-sized flash suppressors.

<span class="mw-page-title-main">SEAL Recon Rifle</span> Designated marksman rifle

The SEAL Recon Rifle is an American designated marksman rifle and assault rifle used by the United States Navy SEALs. Essentially a heavily modified M16 rifle, it is intended to provide SEAL snipers and designated marksmen with a versatile, accurate, lightweight, and relatively compact weapon chambered in 5.56×45mm NATO.

<span class="mw-page-title-main">Mk 14 Enhanced Battle Rifle</span> American selective fire military designated marksman rifle

The Mk 14 Enhanced Battle Rifle (EBR) is an American military selective fire battle rifle, and a designated marksman rifle chambered for the 7.62×51mm NATO cartridge. It is a variant of the M14 battle rifle and was originally built for use with units of United States Special Operations Command, such as the United States Navy SEALs, Delta Force, and task specific Green Berets ODA teams/units.

<span class="mw-page-title-main">SR-25</span> Designated marksman rifle

The SR-25 is a designated marksman rifle and semi-automatic sniper rifle designed by Eugene Stoner and manufactured by Knight's Armament Company.

The Special Operations Peculiar MODification (SOPMOD) kit is an accessory system for the M4A1 carbine, CQBR, FN SCAR Mk 16/17, HK416 and other weapons used by United States Special Operations Command (USSOCOM) special forces units, though it is not specific to SOCOM. The kit allows US Special Operations Forces personnel to configure their weapons to individual preferences and customize for different mission requirements.

<span class="mw-page-title-main">Barrett REC7</span> Semi-automatic rifle, Assault rifle (Full auto/Select fire version)

The Barrett REC7 is an American firearm manufactured as a selective-fire fully-automatic and semi-automatic rifle by Barrett Firearms. It is an M4 carbine utilizing a short-stroke gas piston system. REC7 is available in either 5.56×45mm NATO or 6.8mm Remington SPC. The REC7 is Barrett's second AR-pattern rifle chambered for the 6.8mm Remington SPC cartridge, the first being the Barrett M468 rifle. The 6.8 SPC-chambered M468 rifle employed the same direct gas-impingement system as the M4.

<span class="mw-page-title-main">LWRC M6</span> Series of US military carbines based on the M4 carbine

The M6 is a series of carbines designed and manufactured by LWRC International. It is based on the M4 carbine, with which it shares 80% of its parts. The 'M' model name is not a US military designation. Like the HK416, it features a proprietary short-stroke self-regulating gas piston system and bolt carrier/carrier key design, which prevents trapped gases from contacting the bolt carrier or receiver of the weapon. The manufacturer claims that this reduces the heating and carbon fouling of the internals, simplifies field maintenance, and improves reliability.

<span class="mw-page-title-main">Barrel shroud</span> Firearm covering protective against burns

A barrel shroud is an external covering that envelops the barrel of a firearm to prevent unwanted direct contact with the barrel. Moving coverings such as pistol slides, fore-end extensions of the gunstock/chassis that do not fully encircle the barrel, and the receiver of a firearm itself are generally not described as barrel shrouds, though they can functionally act as such.

The Type CQ is an unlicensed Chinese variant of the M16 rifle manufactured by Norinco. According to the Norinco website, the rifle is officially known as CQ 5.56.

<span class="mw-page-title-main">FB Mini-Beryl</span> Assault Rifle, Carbine

The karabinek wz. 1996 Mini-Beryl is a Polish compact assault rifle (carbine) derived from the FB Beryl service rifle and chambered for 5.56×45mm. It was developed in parallel with the wz. 1996 Beryl by the "Łucznik" Arms Factory in Radom and introduced into service with the Polish Armed Forces in 1997 as the 5,56 mm karabinek krotki wz. 1996.

<span class="mw-page-title-main">Adaptive Combat Rifle</span> Assault rifle (Remington ACR)

The Adaptive Combat Rifle (ACR) is a modular assault rifle formerly designed by Magpul Industries of Austin, Texas, and known initially as the Masada.

<span class="mw-page-title-main">M-LOK</span> Firearm rail interface system

M-LOK, for Modular Lock, is a firearm rail interface system developed and patented by Magpul Industries. The license is free-of-charge, but subject to an approval process.

References

  1. "MK18". Daniel Defense. Archived from the original on 14 April 2021.
  2. "U.S. NAVY MK18 MOD O CUSTOM CLOSE QUARTER COMBAT WEAPON FOR THE SEAFARING SERVICE - Small Arms Review". 5 April 2008.
  3. "SOCOM-MK18 Complete Rifle". danieldefense.com. 13 September 2023.
  4. Johnson, Jeff (14 May 2003). "– CQB Receiver – M4A1 Carbine with 10-Inch Upper Receiver". NDIA. 2003 Joint Services Small Arms Section Annual Symposium, Exhibition, Firing Demonstration & Plant tour: NSWC. Archived from the original on 22 June 2022. Retrieved 22 June 2022.{{cite web}}: CS1 maint: location (link)
  5. "NSWC CRANE SAVES $970K FOR NAVSEA SMALL ARMS OFFICE" (PDF). Defense Acquisition University. US Navy. 22 August 2008. pp. 85–86. Archived from the original (PDF) on 22 June 2022. Retrieved 22 June 2022.
  6. Marr, Bill (7 December 2015). "223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches". rifleshooter.com. Archived from the original on 21 October 2021. Retrieved 29 June 2021.
  7. "1005-01-671-3911, MODIFICATION KIT,GUN,WEAPON". www.nsn-now.com.
  8. ""In The Wild: USAF SOF URG-I 10.3 CQBR"". 20 January 2021.
  9. 1 2 "CQBR Block I Parts List". clonerifles.com.