The CompM2 is a battery-powered, non-magnifying red dot type of reflex sight for firearms manufactured by Aimpoint AB. It was first introduced in the U.S. Armed Forces in 2000, [1] designated as the M68 Close Combat Optic (M68 CCO; NSN: 1240-01-411-1265). It is also known as the M68 Aimpoint and is designed to meet United States military standards. The sight is designed for use with the M16/M4 family of rifles, but can be mounted on any weapon fitted with an upper Picatinny rail. It is also NVG-compatible—the aiming dot is still visible through night vision scopes and goggles. The Army's M68 designation was also applied to a later version of the sight, the Aimpoint CompM4.
The M68 is parallax-free at around 45.7 m (50 yards), meaning that the red dot will not change position based on eye position at that range. [2] At shorter ranges the point of aim will change position based on eye position with the maximum error being equal to the radius of the sight's optical window at short range. [3] The sight is water-tight down to 25 meters and runs on one 3-volt lithium battery type 2L76 or DL1/3N. Aiming dot brightness is adjustable for better visibility or increased battery life.
The CompM2 is used across branches of the U.S. Armed Forces, Sweden, and various NATO countries, among them Norway. A variant known as the ECOS-N (NSN: 1240-01-495-1385) is also issued as part of the U.S. SOPMOD kit. The sight is also available on the civilian market and is employed by various law enforcement organizations (especially for SWAT type situations that involve close quarters work) and by recreational shooters.
By August 2011, the U.S. Army had bought 1,000,000 M68 Close Combat Optics. Some 85 percent of Army M4s are issued with the CCO, though optics can vary depending on unit. The sight allows soldiers to engage targets out to 300 meters while keeping both eyes open for situational awareness. Post combat surveys show an 85 percent acceptance rate of the CCO as an effective optic and for its value for close quarters fighting. [4]
In July 2009, the Army purchased 565,783 Aimpoint CompM4 sights (a later version of the CompM2), as part of the M68 CCO program. [5]
The M4 carbine is a 5.56×45mm NATO assault rifle developed in the United States during the 1980s. It is a shortened version of the M16A2 assault rifle.
The Colt Canada C7 and C8 are a Canadian family of service rifles, manufactured by Colt Canada, having similar design and function to the Colt M16A3.
Knight's Armament Company (KAC) is an American firearms and firearms parts manufacturer, known for producing the Rail Interface System (RIS) and the Rail Adapter System (RAS) grips for firearms use. The company produces a variety of firearms, including AR-15-style rifles.
The Advanced Combat Optical Gunsight (ACOG) is a series of prismatic telescopic sights manufactured by Trijicon. The ACOG was originally designed to be used on the M16 rifle and M4 carbine, but Trijicon has also developed ACOG accessories for other firearms. Models provide fixed-power magnification levels from 1.25× to 6×. ACOG reticles are illuminated at night by an internal tritium phosphor. Some versions have an additional daytime reticle illumination via a passive external fiberoptic light pipe or are LED-illuminated using a dry battery. The first ACOG model, known as the TA01, was released in 1987.
The Heckler & KochXM8 is a lightweight assault rifle system developed from the late 1990s to early 2000s. The rifle was designed by German small arms manufacturer Heckler & Koch (H&K), and shares design and engineering with their G36 rifle.
M68 or M-68 may refer to:
The Close Quarter Battle Receiver (CQBR) is a replacement upper receiver for the M4A1 carbine developed by the US Navy.
CCO or cco may refer to:
A designated marksman rifle (DMR) is a modern scoped high-precision rifle used by infantry in the designated marksman (DM) role. It generally fills the engagement range gap between a service rifle and a dedicated sniper rifle, at around 300–600 metres (330–660 yd).
Aimpoint AB is a Swedish optics company based in Malmö, Sweden that manufactures red dot sights.
The Special Operations Peculiar MODification (SOPMOD) kit is an accessory system for the M4A1 carbine, CQBR, FN SCAR Mk 16/17, HK416 and other weapons used by United States Special Operations Command (USSOCOM) special forces units, though it is not specific to SOCOM. The kit allows US Special Operations Forces personnel to configure their weapons to individual preferences and customize for different mission requirements.
The Special Actions Detachment or DAE is the tier one special force maritime unit of the Portuguese Navy. It is part of the Portuguese Marine Corps. Raised in 1985, the DAE is one of the smallest special forces units within the Portuguese Armed Forces. It is responsible for conducting air-sea rescue, amphibious reconnaissance, amphibious warfare, black operation, bomb disposal, CBRN defense, coastal raiding, counterterrorism, direct action, executive protection, hostage rescue, irregular warfare, ISTAR, long-range penetration, JTAC, manhunt high-value target, maritime sabotage, mountain rescue, naval boarding, operation behind high risk enemy lines, special operations, special reconnaissance, tracking targets, underwater demolition, unconventional warfare, other missions in support of Portuguese and NATO armed forces. DAE's mission and training are similar to their American counterparts DEVGRU and the British SBS. DAE often trains with them alongside other SMU counter-terror units.
The M6 is a series of carbines designed and manufactured by LWRC International. It is based on the M4 carbine, with which it shares 80% of its parts. The 'M' model name is not a US military designation. Like the HK416, it features a proprietary short-stroke self-regulating gas piston system and bolt carrier/carrier key design, which prevents trapped gases from contacting the bolt carrier or receiver of the weapon. The manufacturer claims that this reduces the heating and carbon fouling of the internals, simplifies field maintenance, and improves reliability.
The Aimpoint CompM4 is a non-magnified red dot style gun sight adopted by the U.S. Armed Forces, designated the M68 CCO. It is produced by the Swedish company Aimpoint and is the successor to the earlier M68CCO, the Aimpoint CompM2.
The C79 optical sight (SpecterOS3.4x) is a telescopic sight manufactured by Elcan. A variant, the M145 Machine Gun Optic is in use by the US military. It is 3.4×28, meaning 3.4x magnification, and a 28mm diameter objective lens. A tritium illuminated reticle provides for normal and low-light conditions sighting. It can be mounted to a variety of rifles and light machine guns using the Picatinny rail mounting system or the similar Diemaco rail system found on small arms produced by Diemaco/Colt Canada. Similar rifle sights are the Sight Unit Small Arms, Trilux (SUSAT) and the Advanced Combat Optical Gunsight (ACOG).
The 17th Raiders Wing is the Italian Air Force special forces unit. It is the youngest special force created in Italy. It is based in Furbara, near Rome and part of the Comando interforze per le Operazioni delle Forze Speciali. Until 8 April 2008 the unit was named Reparto Incursori Aeronautica Militare but with the expansion and evolution of the unit's assignments and its size, the name was changed to "17° Stormo Incursori".
A red dot sight is a common classification for a non-magnifying reflector sight that provides an illuminated red dot to the user as a point of aim. A standard design uses a red light-emitting diode (LED) at the focus of collimating optics, which generates a dot-style illuminated reticle that stays in alignment with the firearm the sight is attached to, regardless of eye position.
The AN/PAS-13B thermal weapon sight (TWS) is an infrared sight developed for the United States military by Raytheon. The sight is designed for use on small arms in the U.S. military's inventory, but it can also be used as a standalone observation device. The AN/PAS-13B uses thermal imaging so that it can be used day or night. Thermal imaging also allows the sight to see through smoke or fog, things that may normally obscure other night vision devices. The AN/PAS-13 first became operationally capable with the U.S. Army in 1998 and has reached a total production of 33,400 units.
Scope mounts are rigid implements used to attach (typically) a telescopic sight or other types of optical sights onto a firearm. The mount can be made integral to the scope body or, more commonly, an external fitting that clamp onto the scope tube via screw-tightened rings. The scope and mount are then fastened onto compatible interfaces on the weapon. Words such as mounts and bases are used somewhat loosely, and can refer to several different parts which are either used together or in place of each other as ways to mount optical sights to firearms.
The Elcan Specter is a line of multi-role prism sights created by Raytheon ELCAN Optical Technologies originally designed for M16/M4 family of rifles but now also exists for light machine gun and heavy machine guns. Most of the optics are capable of switching between magnifications and illumination.
{{cite web}}
: CS1 maint: archived copy as title (link)