.338 Norma Magnum

Last updated
.338 Norma Magnum
.338 Lapua Magnum vs .338 Norma Magnum.jpg
Side by side comparison of the .338 Lapua Magnum cartridge to the .338 Norma Magnum cartridge.
Type Rifle
Place of originSweden
United States
Production history
DesignerJimmy Sloan, Norma
Manufacturer Norma
Produced2009
Specifications
Parent case .416 Rigby
Case typeRimless, bottleneck
Bullet diameter8.60 mm (0.339 in)
Neck diameter9.40 mm (0.370 in)
Shoulder diameter14.50 mm (0.571 in)
Base diameter14.87 mm (0.585 in)
Rim diameter14.93 mm (0.588 in)
Rim thickness1.52 mm (0.060 in)
Case length63.30 mm (2.492 in)
Overall length93.50 mm (3.681 in)
Case capacity6.95 cm3 (107.3  gr H2O)
Rifling twist235 mm (1 in 9.25 in)
Primer typeLarge rifle magnum
Maximum pressure440.00 MPa (63,817 psi)
Ballistic performance
Bullet mass/typeVelocityEnergy
19.44 g (300 gr) Sierra MatchKing823 m/s (2,700 ft/s)6,585 J (4,857 ft⋅lbf)
Test barrel length: 610 mm (24 inches)

The .338 Norma Magnum is a cartridge first introduced in 2008 and came into production in 2009, designed by Norma of Sweden.

Contents

Design history

The .338 Norma Magnum was originally developed as a long-range sport shooting wildcat cartridge by the American sport shooter Jimmie Sloan with the help of Dave Kiff, owner of Pacific Tool and Gauge, who made the reamers and headspace gauges. Barrels were supplied by Rock Creek Barrel Inc. Various twist rates were tried with 5R rifling. It was designed as a way to optimize shooting the 19.44 grams (300.0 grains)8.59 millimetres (0.338 in) caliber Sierra HPBT MatchKing projectile from actions and magazines that lack the length to handle cartridges exceeding 91.44 mm (3.600 in) in overall length. The 19.44 grams (300.0 gr)8.59 mm (0.338 in) caliber Sierra HPBT MatchKing projectile was not available when the .338 Lapua Magnum was originally designed (it was optimized for shooting 16.2 g (250 gr) projectiles) and .338 Lapua Magnum cartridges intended for military use are generally loaded with shorter 16.2 g (250 gr) to 18.47 g (285 gr) projectiles. Later the design was purchased by the Swedish ammunition manufacturer Norma. The .338 Norma Magnum cartridge was C.I.P. certified on 26 May 2010 and thus became an officially registered and sanctioned rifle cartridge. [1]

The .338 Norma Magnum exhibits slightly reduced ballistic performance compared to the .338 Lapua Magnum on average, due to the .338 Lapua Magnum offering a variety of cartridges that use lighter bullets, and also due to the reduced case capacity of the .338 Norma Magnum. However, the performance of both cartridges are very close, making the .338 Norma Magnum more efficient[ how? ].

Cartridge dimensions

The .338 Norma Magnum prior to C.I.P. certification had a shorter cartridge overall length (91.44 mm (3.60 in) compared to the cartridge overall length of the .338 Lapua Magnum (93.50 mm (3.681 in). The .338 Norma Magnum loaded with 19.44 g (300 gr) .338 caliber Sierra HPBT projectiles will have these projectile less deeply seated compared to the .338 Lapua Magnum when both cartridges are loaded to 91.44 mm (3.681 in) overall length. To achieve this the .338 Norma Magnum cartridge utilizes a shorter case (about 63.30 mm (2.492 in) with less taper and a slightly sharper shoulder angle with a slightly longer neck, resulting in about 6.5% less case capacity. However the cartridge overall lengths of the .338 Norma Magnum and .338 Lapua Magnum were, as of 2013, determined at 93.50 mm (3.681 in) by the C.I.P. rulings for these cartridges.

U.S. government market survey and ammunition availability

On June 17, 2008, the U.S. government issued a market survey to support a requirement for a Precision Sniper Rifle (PSR) to possibly replace the currently fielded Bolt Action SOF Sniper Systems MK 13 (.300 Winchester Magnum) and the M40 and M24 (7.62×51mm NATO) chambered to safely fire factory produced "non-wildcat" .338 caliber ammunition. [2]

The .338 Norma Magnum was designed to improve upon the .338 Lapua Magnum when loaded with 19.44 g (300 gr) Sierra very-low-drag bullets in magazines and actions that restrict the .338 Lapua Magnum's maximum cartridge overall length.

In long range precision sport shooting rifles, which the .338 Norma Magnum cartridges were designed for, the chamber and throat area of the barrel are often custom made by a gunsmith for a particular cartridge, meaning the rifle (system) is consciously constructed for optimal use with a particular cartridge case and projectile combination. If projectiles with differing dimensions are to be used this will generally erode such a custom made system's accuracy potential. This makes objective comparisons between cartridges hard, since cartridges are essential parts of a larger rifle system.

Since the .338 Lapua Magnum can be loaded to its C.I.P. overall length or even somewhat longer, the practical difference between the two cartridges gradually becomes negligible. Some manufacturers of .338 Lapua Magnum actions, magazines and rifles have indicated that they intend to offer products that will allow the use of .338 Lapua Magnum cartridges that can handle overall lengths that exceed the current C.I.P. .338 Lapua Magnum maximal overall length standard of 93.50 mm (3.681 in).

In May 2017 the United States Special Operations Command, in conjunction with the United States Marine Corps issued a sources sought notice for 5,000 Lightweight Medium Machine Guns (LWMMG) chambered for .338 Norma Magnum polymer-cased ammunition. The aim is to identify a machine gun with a 24 inches (610 mm) long barrel weighing 24 pounds (10.9 kg) or less, which offers sufficient accuracy out to 2,000 metres (2,187 yd) to engage area targets and vehicles. [3]

In 2019 the U.S. Special Operations Command awarded Barrett Firearms Manufacturing a $50,000,000 contract, ordering the Barrett MRAD, designated MK22 Advanced Sniper Rifle (ASR), chambered in .338 Norma Magnum (designated XM1162) as well as 7.62×51mm NATO and .300 Norma Magnum. [4] [5] [6]

In 2020 the U.S. Special Operations Command awarded SIG Sauer a contract, ordering the MG 338 machine gun chambered in .338 Norma Magnum. [7]

Chambering availability

The .338 Norma Magnum chambering is offered for these factory rifles:

Bolt action rifles

Selective fire

Semi-automatic rifles

See also

Notes

  1. ↑ This is a switch chambering and barrel sniper rifle that can also fire .300 Norma Magnum, .300 PRC, and 6.5 Creedmoor cartridges. [b] [c]

Related Research Articles

<span class="mw-page-title-main">.338 Lapua Magnum</span> Finnish rifle cartridge

The .338 Lapua Magnum is a Finnish rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. Due to its use in the War in Afghanistan and the Iraq War, the cartridge has become widely available.

<span class="mw-page-title-main">Accuracy International AWM</span> Sniper rifle

The Accuracy International AWM is a bolt-action sniper rifle manufactured by Accuracy International designed for magnum rifle cartridges. The Accuracy International AWM is also unofficially known as the AWSM, which typically denotes AWM rifles chambered in .338 Lapua Magnum.

The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have features that improve performance in extremely cold conditions without impairing operation in less extreme conditions.

<span class="mw-page-title-main">6.5×55mm Swedish</span> Nordic 6mm centerfire cartridge

6.5×55mm Swedish, also known simply as 6.5×55mm, 6.5x55 SE, 6.5x55 Swede, or in its native military as 6.5 mm patron m/94, meaning "6.5 mm cartridge model 94", referring to 1894, is a first-generation smokeless powder rimless bottlenecked rifle cartridge. The cartridge has most users in the Scandinavian countries, where it is known as the 6,5×55 or just "the 6,5".

The .416 Rigby is a rifle cartridge designed in 1911 by London based gunmaker John Rigby & Company, for hunting dangerous game. It is the first cartridge to use a bullet of .416 inch diameter. The rifles, as built by John Rigby & Co., were initially made up on the Magnum Mauser 98 action, although in later years, some were made on standard length actions, a perfect example being the rifle used by legendary professional hunter Harry Selby. Other famous users of the cartridge were Commander David Enderby Blunt, John Taylor, and Jack O'Connor.

<span class="mw-page-title-main">.300 Winchester Magnum</span> Rifle cartridge

The .300 Winchester Magnum is a belted, bottlenecked magnum rifle cartridge that was introduced by the Winchester Repeating Arms Company in 1963. The .300 Winchester Magnum is a magnum cartridge designed to fit in a standard rifle action. It is based on the .375 H&H Magnum, which has been blown out, shortened, and necked down to accept a .30 caliber (7.62 mm) bullet.

<span class="mw-page-title-main">.338 Winchester Magnum</span> Rifle cartridge

The .338 Winchester Magnum is a .338 in (8.6 mm) caliber, belted, rimless, bottlenecked cartridge introduced in 1958 by Winchester Repeating Arms. It is based on the blown-out, shortened .375 H&H Magnum. The .338 in (8.6 mm) is the caliber at which medium-bore cartridges are considered to begin. The .338 Winchester Magnum is the first choice among professional brown bear guides in Alaska to back up clients where a powerful stopping caliber is required on charging bears. It is also the most popular medium-bore cartridge in North America and has the most widely available choice in rifles among medium bore rifles. The action length is the same as a .30-06, and most major rifle manufacturers in the United States chamber rifles for the cartridge including the semi-automatic Browning BAR Mk II Safari, making it a very powerful combination against charging dangerous game. The cartridge was intended for larger North American big-game species and has found use as for the hunting of thin-skinned African plains-game species.

The .408 Cheyenne Tactical is a specialized rimless, bottlenecked, centerfire cartridge for military long-range sniper rifles that was developed by Dr. John D. Taylor and machinist William O. Wordman. The round was designed with a possible military need for a cartridge for anti-personnel, anti-sniper, and anti-materiel roles with a (supersonic) precision range of 2,200 yards. It is offered as a competitor to the most common military NATO long-range service cartridges, such as .338 Lapua Magnum and the .50 BMG.

The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.

The .260 Remington cartridge was introduced by Remington in 1997. Many wildcat cartridges based on the .308 Winchester case had existed for years before Remington standardized this round.

The .300 Lapua Magnum (7.62×70mm) is a rimless, bottlenecked, centerfire cartridge developed for long-range rifles. The parent case of the .300 Lapua Magnum is the .338 Lapua Magnum necked down to a smaller caliber. The .338 cartridge case was selected to withstand high chamber pressures. Combining these high pressures with smaller, lighter bullets than its parent case, .300 Lapua Magnum loadings have high muzzle velocities.

The delta L problem refers to certain firearm chambers and the incompatibility of some ammunition made for that chamber. ΔL is a Commission Internationale Permanente (C.I.P.) geometric dimensioning and tolerancing definition for cartridge cases that are longer than the chamber they have to fit in. "Delta L" essentially means "difference in length".

The .375 Ruger (9.5×65.5mm) is a rimless, standard-length rifle cartridge designed for hunting large, dangerous game. It is designed to provide an increase in performance over the .375 H&H cartridge within the context of a standard-length rifle action. The cartridge was designed in partnership by Hornady and Ruger. In 2007, it was released commercially and chambered in the Ruger Hawkeye African and the Ruger Hawkeye Alaskan rifles.

<span class="mw-page-title-main">6.5mm Creedmoor</span> Centerfire rifle cartridge

The 6.5mm Creedmoor (6.5×48mm), designated 6.5 Creedmoor by SAAMI, 6,5 Creedmoor by the C.I.P. is a centerfire rifle cartridge introduced by Hornady in 2007. It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name. The cartridge is a necked-down modification of the .30 Thompson Center.

The Precision Sniper Rifle (PSR) was a program by United States Special Operations Command to replace all bolt-action sniper rifles in use by United States special operations snipers with a single bolt-action rifle chambered for a large caliber Magnum round such as .300 Win Mag and .338 Lapua Magnum. The solicitation was placed on January 15, 2009. The contract was awarded to the Remington Modular Sniper Rifle and was designated the Mk 21 Precision Sniper Rifle.

The Savage 110 BA is a bolt-action sniper/tactical rifle manufactured by Savage Arms. The rifle is designated with an "LE" code; "Law Enforcement". All 110 BA series rifles are configured with AccuTrigger, matte-blued barreled action, fluted heavy free-floating barrel, muzzle brake, oversized bolt handle, external box magazine, magpul adjustable stock, adjustable pistol grip, and three swivel studs for sling and bipod mounting.

The Modular Sniper Rifle, or MSR, is a bolt-action sniper rifle developed and produced by Remington Arms for the United States Army. It was introduced in 2009, and was designed to meet specific United States Army and USSOCOM Precision Sniper Rifle requirements. The MSR initially won the PSR competition, and was called the Remington Mk 21 Precision Sniper Rifle in U.S. military service. However, it was then decided that the Mk 21 did not conform to SOCOM requirements at the time in 2018, and the program was re-competed with the Barrett MRAD selected in 2019 as the Mk 22 Advanced Sniper Rifle solution.

The .300 Norma Magnum, also known as .300 NM or 300 Norma, is a centerfire magnum rifle cartridge developed by Swedish ammunition manufacturer Norma Precision. The .300 Norma Magnum uses a .338 Norma Magnum parent case necked down to .30 caliber, named to differentiate it from the older .308 Norma Magnum designed in 1960, and has begun to gain popularity among long-range shooters. According to the official C.I.P. rulings, the .300 Norma Magnum can handle up to 440.00 MPa (63,817 psi) Pmax piezo pressure.

<span class="mw-page-title-main">Barrett MRAD</span> Sniper rifle

The Barrett MRAD is a bolt-action sniper rifle designed by Barrett to meet the requirements of the SOCOM PSR. The MRAD is based on the Barrett 98B and includes a number of modifications and improvements. The Barrett MRAD was named the 2012 Rifle of the Year by Shooting Illustrated magazine.

The .375 Swiss P or 9.5×70mmRB, designated 375 Swiss P by the C.I.P., is a rebated rim, bottleneck, centerfire rifle cartridge. It was developed during the late 2010s as a high-powered, long-range cartridge for military snipers and the law enforcement sector. The loaded cartridge is 14.93 mm (0.588 in) in diameter (rim) and 93.5 mm (3.68 in) long. It can penetrate better-than-standard military body armor and has a maximum supersonic range of about 1,600 metres (1,750 yd) with C.I.P. conform FMJ factory ammunition at sea level conditions. Muzzle velocity is dependent on barrel length, seating depth, and powder charge, and varies from 860 to 870 m/s for commercial loads with 22.7-gram (350 gr) bullets, which corresponds to about 8,500 J (6,300 ft⋅lbf) of muzzle energy.

References

  1. ↑ "338 Norma Mag" (PDF). Commission internationale permanente pour l'épreuve des armes à feu portatives. 26 May 2010. Archived from the original (PDF) on 4 June 2022. Retrieved 4 June 2022.
  2. ↑ "Precision Sniper Rifle Solicitation Number: H92222-09-PSR". FBO. 17 June 2008. Archived from the original on 7 November 2015. Retrieved 4 June 2022.
  3. ↑ "Total Game Changer – USSOCOM & USMC Take First Steps Toward Adopting a .338NM Lightweight Medium Machine Gun". Soldier Systems Daily. 15 May 2015. Archived from the original on 18 May 2017. Retrieved 4 June 2022.
  4. ↑ "1305-01-669-1219 (1305-AC32, 13052432, 13072044) Data". Part Target. Archived from the original on 4 June 2022. Retrieved 3 June 2022.
  5. ↑ "Contracts For March 11, 2019". US Department of Defense. 11 March 2019. Archived from the original on 27 May 2022. Retrieved 3 June 2022.
  6. ↑ "MK22 Precision Sniper Rifle (PSR)". PEO Soldier. Archived from the original on 18 May 2022. Retrieved 18 May 2022.
  7. ↑ "USSOCOM Completes Safety Certification and Purchase of SIG SAUER MG 338 Machine Guns, Ammunition, and Next Generation Suppressors". SIG Sauer. 15 January 2020. Archived from the original on 2020-01-29. Retrieved 2020-01-29.
  8. ↑ "MRAD Operator's Manual" (PDF). p. 6. Archived from the original (PDF) on 2020-11-06. Retrieved 2019-11-13.
  9. ↑ "Barrett 2019 Catalog" (PDF). p. 33. Archived from the original (PDF) on 2019-05-31. Retrieved 2019-11-12.
  10. ↑ "Remington Modular Sniper Rifle (MSR)". Archived from the original on 2009-06-11. Retrieved 2009-06-25.
  11. ↑ "TSAKO TRG M10)". 2019-11-19. Retrieved 2020-08-16.
  12. ↑ Moss, Matthew (2019-01-22). "SIG Sauer's .338 Norma Magnum Light Machine Gun -". The Firearm Blog. Retrieved 2019-10-03.
  13. ↑ Dynamics, Bruce. "Ohio Ordnance Works Introduces the REAPR". Ohio Ordnance Works. Retrieved 2024-02-16.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.