Pest risk analysis (PRA) is a form of risk analysis conducted by regulatory plant health authorities to identify the appropriate phytosanitary measures required to protect plant resources against new or emerging pests and regulated pests of plants or plant products. Specifically pest risk analysis is a term used within the International Plant Protection Convention (IPPC) (Article 2.1) and is defined within the glossary of phytosanitary terms. [1] as "the process of evaluating biological or other scientific and economic evidence to determine whether an organism is a pest, whether it should be regulated, and the strength of any phytosanitary measures to be taken against it". In a phytosanitary context, the term plant pest, or simply pest, refers to any species, strain or biotype of plant, animal or pathogenic agent injurious to plants or plant products and includes plant pathogenic bacteria, fungi, fungus-like organisms, viruses and virus like organisms, as well as insects, mites, nematodes and weeds.
Introduced plant pests can lower crop yields and have environmental impacts. [2] [3] The spread of plant pests from one geographical area to another is an issue of international concern. [4] [5] The principal international agreement aimed at addressing the spread of plant pests through international trade is the International Plant Protection Convention, a multilateral treaty for international cooperation in plant protection aimed at preventing the spread of pests of plants and plant products, and promoting appropriate measures for their control (IPPC, Article I.1).
In accordance with the WTO Sanitary and Phytosanitary Agreement the IPPC aims to protect plants while limiting interference with international trade. [6] [7] A key principle of the IPPC is that contracting parties (signatories) provide ‘technical justification’ to support phytosanitary decision making affecting trade. [8] The IPPC recognises pest risk analysis as the appropriate format for such technical justification. The responsibility for conducting pest risk analysis sits within government, specifically within a country's National Plant Protection Organization (NPPO) and comes as an obligation when countries become contracting parties to the IPPC (IPPC Article IV, 2a).
IPPC standards, referred to as International Standards for Phytosanitary Measures (ISPM), have been developed to assist NPPOs. The primary ISPMs relevant to pest risk analysis are ISPM 2, Framework for pest risk analysis, [9] ISPM 11, Pest risk analysis for quarantine pests [10] and ISPM 21, Pest risk analysis for regulated non-quarantine pests. [11] Although ISPMs relating to pest risk analysis provide guidance regarding the factors to consider when conducting analyses, they do not provide instructions as to how to actually perform a pest risk analysis. [12] However, many countries including Australia, [13] New Zealand [14] and the USA, [15] have developed procedures to assess the pest risks associated with the import of plant commodities. Devorshak (2012) describes the principles of pest risk analysis, how analyses can be performed and the use of pest risk analysis in regulatory plant protection. [16] A general guide to the principles of pest risk analysis for plant pests and a description of some of the problems and difficulties that may be encountered when undertaking such analyses are included in text by Ebbels (2003) which also covers wider plant health issues. [17]
In accordance with ISPM 11, a pest risk analysis consists of three stages.
Common reasons for initiating a pest risk analysis include:
Within the initiation stage of a pest risk analysis the reason for conducting the analysis, the identity of the pest and or pathways being analysed and the area in relation to which the analysis is conducted (the pest risk analysis area) is provided.
There are three steps to the assessment of pest risk.
The purpose of pest categorization is to determine whether a pest identified during the initiation stage satisfies the criteria of being a quarantine pest. A quarantine pest is a pest of potential economic importance to the area endangered thereby and not yet present there, or present but not widely distributed and being officially controlled. [10] Pest categorization includes all the main elements considered in Step 2 of a pest risk assessment but the elements are considered in less detail and pest categorization is essentially a quick assessment of whether the analysis should continue. The categorization step provides an opportunity to eliminate a pest from analysis at an early stage in the pest risk analysis process thus avoiding unnecessary in-depth examination. Pest categorization can be done with relatively little information, provided that the information available is sufficient to carry out the categorization.
Assessing the likelihood of pest entry requires assessment of each of the pathways with which a pest may be associated, from its origin to its establishment in the pest risk analysis area. In a pest risk analysis initiated by a specific pathway, often an imported commodity or goods associated with an imported commodity, e.g. packing materials, the probability of pest entry is evaluated for that specific pathway. For a pest risk analysis initiated for a specific pest, all probable pathways are evaluated for that individual pest.
To estimate the likelihood of establishment of a pest, biological information about the pest including its life cycle, its hosts or habitat needs, or a diseases epidemiology, together with characteristics of the abiotic environment affecting pest survival such as temperature, precipitation and perhaps soil type affecting its geographic range limit need to be considered. The environmental conditions under which the pest does not survive are also important to understand. Conditions in the pest risk analysis area can then be compared with conditions in areas where the pest survives, and in areas where the pest is known not to be able to survive, so as to assess the likelihood that the pest will establish in the pest risk analysis area. Computer simulation models can be used to inform assessments of likelihood of establishment. [26] [27]
When assessing the likelihood and magnitude of pest spread, the pest's ability to disperse from a point of introduction to new areas within the pest risk analysis area is assessed. The assessment should consider pest population dynamics and the natural mobility of the pest and take into account potential spread via wind, water, soil, seed and pollen, and insect, fungal or nematode vectors as well as spread via human activities such as movement of host material.
In this step the potential impacts that could be expected to result from a pest's introduction and spread is identified, described and, as much as possible, quantified. Pest impacts can take many forms; they may be economic [28] [29] environmental [30] [31] [32] or social impacts. [33] [34] [35] [36] [37] Information on the species impacts in areas where it is already present, and particularly in areas where it has already spread to, together with information influencing the elements of risk in the pest risk analysis area, inform the assessment of potential consequences. Impacts reported from invaded areas are recognized as the best indicator of potential impacts in the pest risk analysis area . However, regarding environmental impacts, if the pest has not previously spread then the absence of any environmental impact in the area of pest origin should not be interpreted to mean that no environmental impact should be expected in the pest risk analysis area. This is because environmental impacts are difficult to predict and a lack of impact in the origin is not a good predictor that there will be no impacts in regions where a pest is introduced. [38]
Recognising that risk is a combination of likelihood and consequences, the results of steps 2 and 3 are combined to provide an overall estimation of pest risk.
For a quarantine pest, pest risk management is the process of evaluation and selection of options to reduce the risk of introduction and spread of the pest. Conclusions from the pest risk assessment (Stage 2) are used to support decisions regarding the level of risk presented by the pest. If a pest is judged to present an unacceptable risk then phytosanitary measures should be identified that will reduce the risk to an acceptable level. Phytosanitary measures should accord with IPPC principles of necessity, managed risk, minimal impact, transparency, harmonization, non-discrimination and technical justification. [39]
ISPM 11 provides more information about each stage of pest risk analysis for quarantine pests.
The level of detail in a pest risk analysis will be limited by the amount and quality of information available, the tools, and time available before a decision is required. Quantitative and qualitative techniques are used in pest risk analysis but pest risk analysis need only be as complex as is required by the circumstances to support a phytosanitary decision and provide the necessary technical justification to defend decisions regarding phytosanitary measures. Nevertheless, a pest risk analysis should be based on sound science, be transparent and consistent with other pest risk analyses conducted by the NPPO. Examples of pest risk analysis are available in the EPPO Platform on PRA. [40]
Estimating the likelihood of pest introduction and of the consequences that could result involves many uncertainties. Uncertainty is always part of pest risk analysis; [41] very often there is a lack of data necessary to reach secure conclusions. The subjective nature of pest risk analysis is also a source of uncertainty. ISPM 11 recognises that pest risk analysis involves many uncertainties, largely since estimates and extrapolations are made from real situations where the pest occurs to a hypothetical situation in the pest risk analysis area. In most cases analyses performed during pest risk analysis use historical data to forecast potential future events. It is important to document the areas of uncertainty and the degree of uncertainty in the assessment, and to indicate where expert judgement has been used. This is necessary for transparency and may also be useful for identifying and prioritizing research needs. [42]
Pest risk analysis, as conducted under the IPPC and SPS Agreement, has been criticised for being reactive, only coming into effect after a pest problem has been identified. [43] For example, many pests now subject to phytosanitary measures, supported by pest risk analysis, only became recognised as potential risks once they had already escaped from their geographical centres of origin and caused impacts in other parts of the world. Some ‘newly escaped’ organisms were previously unknown to science before they escaped [44] and current international standards for pest risk analysis cannot assess risks from unknown organisms. In addition, a pest risk analysis will focus on a pest at the species level assuming the pest to be genetically stable but this can be a great oversimplification if the pest has a short generation time with capacity for rapid genetic change. [45] During the assessment of impact, assessors focus on impacts on known hosts or habitats. However, if a pest adapts to a new host plant [46] [47] or habitat once established in the pest risk analysis area, impacts will be underestimated. Risk analyses for invasive species have also been criticised for being narrowly focused, subjective, often arbitrary and unquantified, and subject to political interference.
Biosecurity refers to measures aimed at preventing the introduction and/or spread of harmful organisms to animals and plants in order to minimize the risk of transmission of infectious disease. In agriculture, these measures are aimed at protecting food crops and livestock from pests, invasive species, and other organisms not conducive to the welfare of the human population. The term includes biological threats to people, including those from pandemic diseases and bioterrorism. The definition has sometimes been broadened to embrace other concepts, and it is used for different purposes in different contexts.
The International Plant Protection Convention (IPPC) is a 1951 multilateral treaty overseen by the United Nations Food and Agriculture Organization that aims to secure coordinated, effective action to prevent and to control the introduction and spread of pests of plants and plant products. The Convention extends beyond the protection of cultivated plants to the protection of natural flora and plant products. It also takes into consideration both direct and indirect damage by pests, so it includes weeds.
International Standards For Phytosanitary Measures No. 15 is an International Phytosanitary Measure developed by the International Plant Protection Convention (IPPC) that directly addresses the need to treat wood materials of a thickness greater than 6mm, used to ship products between countries. Its main purpose is to prevent the international transport and spread of disease and insects that could negatively affect plants or ecosystems. ISPM 15 affects all wood packaging material and requires that they be debarked and then heat treated or fumigated with methyl bromide, and stamped or branded with a mark of compliance. This mark of compliance is colloquially known as the "wheat stamp". Products exempt from the ISPM 15 are made from an alternative material, like paper, plastic or wood panel products.
The European and Mediterranean Plant Protection Organization (EPPO) is an intergovernmental organisation responsible for European cooperation in plant protection in the European and Mediterranean region. Founded on April 18th, 1951 and based in Paris, France, EPPO is the Regional Plant Protection Organization (RPPO) for Europe under the International Plant Protection Convention (IPPC).
The Agreement on the Application of Sanitary and Phytosanitary Measures, also known as the SPS Agreement or just SPS, is an international treaty of the World Trade Organization (WTO). It was negotiated during the Uruguay Round of the General Agreement on Tariffs and Trade (GATT), and entered into force with the establishment of the WTO at the beginning of 1995. Broadly, the sanitary and phytosanitary ("SPS") measures covered by the agreement are those aimed at the protection of human, animal or plant life or health from certain risks.
Phytosanitary may refer to:
Xylophilus ampelinus is a species of bacteria that can cause plant disease. It is available from the NCPPB in the United Kingdom and other international culture collections such as ICMP in New Zealand, and LMG/BCCM in Belgium.
The fall armyworm is a species in the order Lepidoptera and one of the species of the fall armyworm moths distinguished by their larval life stage. The term "armyworm" can refer to several species, often describing the large-scale invasive behavior of the species' larval stage. It is regarded as a pest and can damage and destroy a wide variety of crops, which causes large economic damage. Its scientific name derives from frugiperda, which is Latin for lost fruit, named because of the species' ability to destroy crops. Because of its propensity for destruction, the fall armyworm's habits and possibilities for crop protection have been studied in depth. It is also a notable case for studying sympatric speciation, as it appears to be diverging into two species currently. Another remarkable trait of the larva is that they consistently practice cannibalism, despite its fitness costs.
Agricultural pollution refers to biotic and abiotic byproducts of farming practices that result in contamination or degradation of the environment and surrounding ecosystems, and/or cause injury to humans and their economic interests. The pollution may come from a variety of sources, ranging from point source water pollution to more diffuse, landscape-level causes, also known as non-point source pollution and air pollution. Once in the environment these pollutants can have both direct effects in surrounding ecosystems, i.e. killing local wildlife or contaminating drinking water, and downstream effects such as dead zones caused by agricultural runoff is concentrated in large water bodies.
Sanitary and phytosanitary (SPS) measures are measures to protect humans, animals, and plants from diseases, pests, or contaminants.
The North American Plant Protection Organization (NAPPO), is the phytosanitary standard setting organization recognized by the North American Free Trade Agreement (NAFTA). It was created in 1976 as a regional organization of the International Plant Protection Convention (IPPC) of the Food and Agriculture Organization (FAO) of the United Nations. Previously based in Ottawa, Ontario, it is now headquartered in Raleigh, North Carolina.
Invasive species are a significant threat to many native habitats and species of the United States and a significant cost to agriculture, forestry, and recreation. The term "invasive species" can refer to introduced/naturalized species, feral species, or introduced diseases. Some introduced species, such as the dandelion, do not cause significant economic or ecologic damage and are not widely considered as invasive. Economic damages associated with invasive species' effects and control costs are estimated at $120 billion per year.
Forest pathology is the research of both biotic and abiotic maladies affecting the health of a forest ecosystem, primarily fungal pathogens and their insect vectors. It is a subfield of forestry and plant pathology.
Animal and Plant Health Inspection Service (APHIS) and Plant Protection and Quarantine (PPQ) are responsible for safeguarding agriculture and natural resources from the risks associated with the entry, establishment, or spread of animal and plant pests and noxious weeds.
Plant Protection and Quarantine (PPQ) is one of six operational program units within the Animal and Plant Health Inspection Service (APHIS) of the United States Department of Agriculture (USDA). The PPQ works to safeguard agriculture and natural resources in the U.S. against the entry, establishment, and spread of animal and plant pests and noxious weeds, to help ensure an abundant, high-quality, and varied food supply.
Phytosanitary certification is used to attest that consignments meet phytosanitary import requirements and is undertaken by an NPPO. A phytosanitary certificate for export or for re-export can be issued only by a public officer who is technically qualified and duly authorised by an NPPO.
Citrus black spot is a fungal disease caused by Guignardia citricarpa. This Ascomycete fungus affects citrus plants throughout subtropical climates, causing a reduction in both fruit quantity and quality. Symptoms include both fruit and leaf lesions, the latter being critical to inter-tree dispersal. Strict regulation and management is necessary to control this disease since there are currently no citrus varieties that are resistant.
Bacterial Wilt of Carnations is a bacterial disease caused by the plant pathogen Paraburkholderia caryophylli. Previously, named Pseudomonas caryophilli, the pathogen is an aerobic gram negative bacteria known for only being capable of entering its host through wounds. Once inside the host, it colonizes the vascular system and roots causing symptoms such as, internal stem cracking, yellowing of the leaves, wilting, and the development of cankers. As a bacterial disease, Bacterial Wilt of Carnations can also be characterized by signs such as bacterial streaming, and bacterial ooze.
The Agreement on the Application of Sanitary and Phytosanitary Measures governs rules for food safety and animal and plant health standards. The SPS Agreement permits countries to implement measures provided that they are based on science, are applied only to the extent necessary to protect human, animal and plant life or health and do not arbitrarily or unjustifiably discriminate between countries where identical or similar conditions prevail.
Walther Raúl Enkerlin Hoeflich is a Mexican entomologist, advocate, and pioneer researcher of the economics of applied sterile insect technique (SIT), currently based at the Joint Food and Agriculture Organization (FOA) and International Atomic Energy Agency (IAEA) Division.