Pieter Mosterman

Last updated
Pieter J. Mosterman
Born (1967-03-16) March 16, 1967 (age 55)
Nes, Ameland, Netherlands
Alma mater University of Twente and Vanderbilt University
OccupationScientist, professor, public speaker, inventor
Known forScientific contributions to Modeling and Simulation, Public Speeches, Inventions
Awards
  • IMechE Donald Julius Groen Prize
  • The Society for Modeling and Simulation International (SCS) Distinguished Service Award
Scientific career
Fields Computational science and engineering
Institutions MathWorks, McGill University

Pieter Johannes Mosterman (born March 16, 1967) is Chief Research Scientist and Director of the MathWorks Advanced Research & Technology Office (MARTO) at MathWorks in Natick, Massachusetts. He also holds an Adjunct Professorship at the School of Computer Science at McGill University [1] in Montreal, Canada. His primary research interests are in Computer Automated Multiparadigm Modeling [2] with principal applications in design automation, training systems, and fault detection, isolation, and reconfiguration.

Contents

Early life

He was born in Nes on the island Ameland off the coast of the Netherlands. In 1985 Pieter Mosterman started the B.Sc. program at the University of Twente which he received in 1987, followed by his M.Sc. in Electrical Engineering from the Control Laboratory in 1991. In 1992 he enrolled in the Ph.D. program of Vanderbilt University, Nashville, TN, and graduated at the Center for Intelligent Systems in 1997 with a Ph.D. in Electrical and Computer Engineering. His dissertation was on Hybrid Dynamic Systems: A hybrid bond graph modeling paradigm and its application in diagnosis. After graduation, during 1997 - 2001, Mosterman was Research Associate at the German Aerospace Center (DLR) in Oberpfaffenhofen, Germany.

Career

Mosterman is the Editor of the CRC Press book series on "Computational Analysis, Synthesis, and Design of Dynamic Systems". [3] He coedited:

Service activities as Associate Editor include:

Mosterman is a Member of Advisory Boards:

Mosterman served as Editor-in-Chief of SIMULATION: Transactions of SCS for the Methodology section, Guest Editor of special issues of SIMULATION, ACM Transactions on Modeling and Computer Simulation, and IEEE Transactions on Control Systems Technology (TCST) on the topic of CAMPaM, and as Associate Editor of TCST. Since 2004 he has organized the annual International Bellairs CAMPaM Workshop. From 2007 through 2009 he co-organized the Model-Based Design for Embedded Systems track at the Design Automation and Test in Europe conference and in 2009 he was General Chair of a 2009 workshop on Designing for Embedded Parallel Computing Platforms: Architectures, Design Tools, and Applications. He co-organized the Computational Modeling and Simulation of Embedded Systems track at the 2007 Summer Computer Simulation Conference, the International Conference on High Level Simulation Languages and Applications in 2007, and the 14th International Workshop on Principles of Diagnosis in 2003.

Mosterman's patents include:

Awards

Mosterman designed the Electronics Laboratory Simulator, nominated for The Computerworld Smithsonian Award by Microsoft Corporation in 1994.
He authored HyBrSim — A Modeling and Simulation Environment for Hybrid Bond Graphs for which he was awarded the IMechE Donald Julius Groen Prize [7] in 2003.
He received The Society for Modeling and Simulation International (SCS) Distinguished Service Award [8] in 2009.

Summary

Pieter J. Mosterman:

Related Research Articles

In computer engineering, a hardware description language (HDL) is a specialized computer language used to describe the structure and behavior of electronic circuits, and most commonly, digital logic circuits.

<span class="mw-page-title-main">Mechatronics</span> Combination of electronics and mechanics

Mechatronics, also called mechatronics engineering, is an interdisciplinary branch of engineering that focuses on the integration of mechanical, electrical and electronic engineering systems, and also includes a combination of robotics, electronics, computer science, telecommunications, systems, control, and product engineering.

<span class="mw-page-title-main">Model-based testing</span>

Model-based testing is an application of model-based design for designing and optionally also executing artifacts to perform software testing or system testing. Models can be used to represent the desired behavior of a system under test (SUT), or to represent testing strategies and a test environment. The picture on the right depicts the former approach.

Dassault Systèmes Simulia Corp. is a computer-aided engineering (CAE) vendor. Formerly known as Abaqus Inc. and previously Hibbitt, Karlsson & Sorensen, Inc., (HKS), the company was founded in 1978 by David Hibbitt, Bengt Karlsson and Paul Sorensen, and has its headquarters in Providence, Rhode Island.

The following outline is provided as an overview of and topical guide to automation:

The Advanced Learning and Research Institute (ALaRI), a faculty of informatics, was established in 1999 at the University of Lugano with the mission of promoting research and education in embedded systems. The Faculty of Informatics within very few years has become one of the Switzerland major destinations for teaching and research, ranking third after the two Federal Institutes of Technology, Zurich and Lausanne.

Model-based design (MBD) is a mathematical and visual method of addressing problems associated with designing complex control, signal processing and communication systems. It is used in many motion control, industrial equipment, aerospace, and automotive applications. Model-based design is a methodology applied in designing embedded software.

The Architecture Design and Assessment System (ADAS) was a set of software programs offered by the Research Triangle Institute from the mid-1980s until the early 1990s.

RF microwave CAE CAD is computer-aided design (CAD) using computer technology to aid in the design, modeling, and simulation of an RF or microwave product. It is a visual and symbol-based method of communication whose conventions are particular to RF/microwave engineering.

<span class="mw-page-title-main">Parasoft</span> Software testing framework

Parasoft is an independent software vendor specializing in automated software testing and application security with headquarters in Monrovia, California. It was founded in 1987 by four graduates of the California Institute of Technology who planned to commercialize the parallel computing software tools they had been working on for the Caltech Cosmic Cube, which was the first working hypercube computer built.

Design Automation usually refers to electronic design automation, or Design Automation which is a Product Configurator. Extending Computer-Aided Design (CAD), automated design and Computer-Automated Design (CAutoD) are more concerned with a broader range of applications, such as automotive engineering, civil engineering, composite material design, control engineering, dynamic system identification and optimization, financial systems, industrial equipment, mechatronic systems, steel construction, structural optimisation, and the invention of novel systems.

MULTICUBE is a Seventh Framework Programme (FP7) project aimed to define innovative methods for the design optimization of computer architectures for the embedded system domain.

MLDesigner is an integrated modeling and simulation tool for the design and analysis of complex embedded and networked systems. MLDesigner speeds up modeling, simulation and analysis of discrete event, discrete time and continuous time systems concerning architecture, function and performance. The tools is based on ideas of the "Ptolemy Project", done at the University if California Berkeley. MLDesigner is developed by MLDesign Technologies Inc. Palo Alto, CA, USA in collaboration with Mission Level Design GmbH, Ilmenau, Germany.

<span class="mw-page-title-main">CriticalBlue</span> Software company in United Kingdom

CriticalBlue is a Scottish software company based in Edinburgh that is primarily active in two areas of technology: anti-botnet and automated threat prevention for mobile businesses, and software optimization tools and services for Android and Linux platforms.

Mengchu Zhou is a Chinese Distinguished Professor of electrical and computer engineering in the Helen and John C. Hartmann Dept. of Electrical and Computer Engineering at New Jersey Institute of Technology (NJIT) and at Macau University of Science and Technology. He is the Chairman of IKAS Industries of Shenzhen in China and a Board Member of OneSmart Education Group headquartered in China.

<span class="mw-page-title-main">Gabriel Wainer</span> Canadian Computer Scientists

Gabriel A. Wainer is a Canadian/Argentinian computer scientist known for his work in modeling and simulation. He is a Professor in the Department of Systems and Computer Engineering at Carleton University in Ottawa, Canada.

References

  1. ↑ McGill University
  2. ↑ CAMPaM Workshops.
  3. ↑ CRC Press Series on Computational Analysis, Synthesis, and Design of Dynamic Systems edited by Pieter J. Mosterman.
  4. ↑ Nicolescu, Gabriela; Mosterman, Pieter J., eds. (2010). Model-Based Design for Embedded Systems. Computational Analysis, Synthesis, and Design of Dynamic Systems. Vol. 1. Boca Raton: CRC Press. ISBN   978-1-4200-6784-2.
  5. ↑ Zander, Justyna; Schieferdecker, Ina; Mosterman, Pieter J., eds. (2011). Model-Based Testing for Embedded Systems. Computational Analysis, Synthesis, and Design of Dynamic Systems. Vol. 13. Boca Raton: CRC Press. ISBN   978-1-4398-1845-9.
  6. ↑ Automated approach to resolving artificial algebraic loops, Patents 2009.
  7. ↑ Donald Julius Groen Prize
  8. ↑ The Society for Modeling and Simulation International (SCS), Awards in 2009.
  9. ↑ Patented Inventions
  10. ↑ Books at Amazon
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.