SB-2 Pelican | |
---|---|
General information | |
Type | Four/six-seat light transport |
National origin | Switzerland |
Manufacturer | Pilatus Aircraft |
Number built | 1 |
History | |
First flight | 30 May 1944 |
The Pilatus SB-2 Pelican was a civil utility aircraft developed by a purposely founded development bureau at the ETH Zurich on behalf of the Federal Air Authority. In November 1940 it was decided to go on with the project and build the aircraft, in February 1941 the Authority approved the development bureau to have it built at the newly formed Pilatus Aircraft company.
In 1938 the Federal Air Authority was looking for an aircraft able to land at minial airfields in mountain valleys. In fact the aircraft was desired to define the criteria such possible future airfields would have to meet. So this was not to be the aircraft for such air transport itself but a means to find possible airfield locations.
The previous project of a four-seater STOL experimental aircraft under the designation Studienbüro für Spezialflugzeuge SB-1 was not implemented, so it was followed by the SB-2, which at some moments was also discussed for commercial use. [1] Work on the SB-2 Pelican, a special “slow-flying” aircraft, commenced in the winter of 1941. [2] Good short takeoff and landing credentials, plus steep climbing capabilities, were essential attributes of the aircraft flown in the narrow Alpine valleys at that time. The aircraft was designed to carry five people, the double controls could be reduced to one if flown with only one pilot.
The configuration of the SB-2 was slightly unusual, in that it was provided with tricycle undercarriage (an uncommon feature at the time), and a wing that had a slight forward sweep. [2]
As it turned out, the type was never actually tested in its originally intended role. Only twice the aircraft was used later by the company it was sold to, Alpar, to land in a narrow mountain valley.
The SB-2 also served as the basis for the design work on a larger STOL aircraft with an increased passenger capacity, the Studienbüro für Spezialflugzeuge SB-5, whose development was stopped prior to any construction work. [3]
The SB-2 made its maiden flight on 30 May 1944. [4] After extensive trials, the only model built went to Alpar AG in Bern. The Pelikan was well suited for passenger operations, but could have also been used for aerial photography, which it never was. The bottom loading opening was useful for some freight transport and agricultural work.
During an air display on 13 June 1948, the Pelican flipped over because the nosewheel sheared off from an unnoticed transverse slip. It was stored damaged during which time still improvements were discussed by the chief engineer Belart of the Studienbüro, while Alpar was hoping to raise the takeoff weight and asked Pilatus to submit a bid for a conversion to seven seats at the end of January 1949. Calculations were made and drawings produced with other wheels. When Pilatus refused to offer a price and insisted on effort calculation, estimated at 160'000 Swiss Francs, Alpar had to give up plans to rebuild the aircraft. On March 23, 1949, the aircraft was removed from the Swiss registry. [5]
Data from Jane's all the World's Aircraft 1947 [6]
General characteristics
Performance
External images | |
---|---|
Pilatus ETH SB-2 Pelican | |
Pilatus SB-2 Plan | |
Pilatus SB-2 Air | |
Pilatus SB-2 Taxiway | |
Pilatus SP-2 Side | |
Pilatus SP-2 front | |
Pilatus SB-2 top |
Aircraft of comparable role, configuration, and era
Pilatus Aircraft Ltd. is an aerospace manufacturer located in Stans, Switzerland. In June 2016, the company employed 1,905 people.
The Bristol Type 170 Superfreighter Mk 32 was a larger, stretched version of the Bristol Freighter designed for Silver City Airways for use on the short air ferry routes to France.
The Central Centaur IIA, a.k.a. Central C.F.2a, was a British civil six-passenger joyriding biplane aircraft produced by Central Aircraft Company Limited of London.
The Bréguet 280T was a French biplane airliner of the late 1920s, created by the manufacturer as a means of finding a civil market for their 19 warplane, as they had once tried before with the 26T.
The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.
The Thurston Teal is a family of two- and four-seat all-aluminium amphibious aircraft designed by David Thurston in the United States and first flown in 1968.
The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.
The Alisport Yuma is an Italian ultralight aircraft, produced by Alisport of Cremella. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Australian Aircraft Kits Hornet STOL is an Australian ultralight aircraft, designed and produced by Australian Aircraft Kits and introduced in 2004. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Roland S-STOL is a German STOL ultralight and light-sport aircraft, produced by Roland Aircraft. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The World Aircraft Vision, also called the Sentinel, is an American STOL amateur-built aircraft, produced by the World Aircraft Company. The aircraft was publicly introduced at Sun 'n Fun in 2012 and production is expected to commence in 2014. It is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The Just SuperSTOL is an American STOL amateur-built aircraft, designed and produced by Just Aircraft of Walhalla, South Carolina. The aircraft is supplied as a kit for amateur construction.
The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The V-STOL XC 2000T is an American homebuilt and ultralight trainer aircraft that was designed and produced by V-STOL Aircraft of Fort Myers, Florida, introduced in the fall of 1997. When it was available the aircraft was supplied as a kit for amateur construction.
The V-STOL Super Solution 2000 is an American STOL homebuilt aircraft that was designed by Dick Turner and produced by V-STOL Aircraft Corporation of Fort Myers, Florida. When it was available the aircraft was supplied as a kit for amateur construction.
The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.
The Ibis GS-501 Urraco (Magpie) is a Colombian homebuilt aircraft that was designed and produced by Ibis Aircraft of Cali, introduced in 2000. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Rans S-21 Outbound is an American STOL homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas. It was introduced at AirVenture in 2016. The aircraft is supplied as a quick-build kit for amateur construction or ready-to-fly.
The Pilatus SB-1 was to be an experimental aircraft developed by the Studienbüro für Spezialflugzeuge at the ETH Zurich department of aircraft statics and aircraft construction at request of the Federal Air Authority..
The Pilatus SB-5 was a study for a civil utility aircraft by the Studienbüro für Spezialflugzeuge at the ETH Zurich department of aircraft statics and aircraft construction.