Plant transformation vector

Last updated

Plant transformation vectors are plasmids that have been specifically designed to facilitate the generation of transgenic plants. The most commonly used plant transformation vectors are T-DNA binary vectors and are often replicated in both E. coli , a common lab bacterium, and Agrobacterium tumefaciens , a plant-virulent bacterium used to insert the recombinant DNA into plants.

Contents

Plant transformation vectors contain three key elements:

Steps in plant transformation

A custom DNA plasmid sequence can be created and replicated in various ways, but generally, all methods share the following processes:

Plant transformation using plasmids begins with the propagation of the binary vector in E. coli. When the bacterial culture reaches the appropriate density, the binary vector is isolated and purified. Then, a foreign gene can be introduced. The engineered binary vector, including the foreign gene, is re-introduced in E. coli for amplification.

The engineered binary factor is isolated from E. coli and is introduced into Agrobacteria containing a modified (relatively small) Ti plasmid. This engineered Agrobacteria can be used to infect plant cells. The T-DNA, which contains the foreign gene, becomes integrated into the plant cell genome. In each infected cell, the T-DNA is integrated at a different site in the genome.

The entire plant will regenerate from a single transformed cell, resulting in an organism with the transformed DNA integrated identically across all cells.

Consequences of the insertion

Plasmid selection

A selector gene can be used to distinguish successfully genetically modified cells from unmodified ones. The selector gene is integrated into the plasmid along with the desired target gene, providing the cells with resistance to an antibiotic, such as kanamycin, ampicillin, spectinomycin or tetracycline. The desired cells, along with any other organisms growing within the culture, can be treated with an antibiotic, allowing only the modified cells to survive. The antibiotic gene is not usually transferred to the plant cell but instead remains within the bacterial cell.

Plasmids replication

Plasmids replicate to produce many plasmid molecules in each host bacterial cell. The number of copies of each plasmid in a bacterial cell is determined by the replication origin, which is the position within the plasmid molecule where DNA replication is initiated. Most binary vectors have a higher number of plasmid copies when they replicate in E. coli; however, the plasmid copy-number is usually lower when the plasmid is resident within Agrobacterium tumefaciens . Plasmids can also be replicated using the polymerase chain reaction (PCR).

T-DNA region

T-DNA contains two types of genes: the oncogenic genes, encoding for enzymes involved in the synthesis of auxins and cytokinins and responsible for tumor formation, and the genes encoding for the synthesis of opines. These compounds, produced by the condensation between amino acids and sugars, are synthesized and excreted by the crown gall cells, and they are consumed by A. tumefaciens as carbon and nitrogen sources.

The genes involved in opine catabolism, T-DNA transfer from the bacterium to the plant cell and bacterium-bacterium plasmid conjugative transfer are located outside the T-DNA. [3] [4] The T-DNA fragment is flanked by 25-bp direct repeats, which act as a cis-element signal for the transfer apparatus. The process of T-DNA transfer is mediated by the cooperative action of proteins encoded by genes determined in the Ti plasmid virulence region (vir genes) and in the bacterial chromosome. The Ti plasmid also contains the genes for opine catabolism produced by the crown gall cells and regions for conjugative transfer and for its own integrity and stability. The 30 kb virulence (vir) region is a regulon organized in six operons essential for the T-DNA transfer (virA, virB, virD, and virG) or for the increasing of transfer efficiency (virC and virE). [3] [4] [5] Several chromosomal-determined genetic elements have shown their functional role in the attachment of A. tumefaciens to the plant cell and bacterial colonization. The loci chvA and chvB are involved in the synthesis and excretion of the b -1,2 glucan, [6] the chvE required for the sugar enhancement of vir genes induction and bacterial chemotaxis. [7] [8] [9] The cell locus is responsible for the synthesis of cellulose fibrils. [10] The pscA (exoC) locus is involved in the synthesis of both cyclic glucan and acid succinoglycan. [11] [9] The att locus is involved in the cell surface proteins. [12]

Related Research Articles

<span class="mw-page-title-main">Bacterial conjugation</span> Method of bacterial gene transfer

Bacterial conjugation is the transfer of genetic material between bacterial cells by direct cell-to-cell contact or by a bridge-like connection between two cells. This takes place through a pilus. It is a parasexual mode of reproduction in bacteria.

<span class="mw-page-title-main">Plasmid</span> Small DNA molecule within a cell

A plasmid is a small, extrachromosomal DNA molecule within a cell that is physically separated from chromosomal DNA and can replicate independently. They are most commonly found as small circular, double-stranded DNA molecules in bacteria; however, plasmids are sometimes present in archaea and eukaryotic organisms. Plasmids often carry useful genes, such as antibiotic resistance and virulence. While chromosomes are large and contain all the essential genetic information for living under normal conditions, plasmids are usually very small and contain additional genes for special circumstances.

<span class="mw-page-title-main">Expression vector</span> Virus or plasmid designed for gene expression in cells

An expression vector, otherwise known as an expression construct, is usually a plasmid or virus designed for gene expression in cells. The vector is used to introduce a specific gene into a target cell, and can commandeer the cell's mechanism for protein synthesis to produce the protein encoded by the gene. Expression vectors are the basic tools in biotechnology for the production of proteins.

<span class="mw-page-title-main">Genetic transformation</span> Genetic alteration of a cell by uptake of genetic material from the environment

In molecular biology and genetics, transformation is the genetic alteration of a cell resulting from the direct uptake and incorporation of exogenous genetic material from its surroundings through the cell membrane(s). For transformation to take place, the recipient bacterium must be in a state of competence, which might occur in nature as a time-limited response to environmental conditions such as starvation and cell density, and may also be induced in a laboratory.

<i>Agrobacterium tumefaciens</i> Bacterium, genetic engineering tool

Agrobacterium tumefaciens is the causal agent of crown gall disease in over 140 species of eudicots. It is a rod-shaped, Gram-negative soil bacterium. Symptoms are caused by the insertion of a small segment of DNA, from a plasmid into the plant cell, which is incorporated at a semi-random location into the plant genome. Plant genomes can be engineered by use of Agrobacterium for the delivery of sequences hosted in T-DNA binary vectors.

<i>Agrobacterium</i> Genus of bacteria

Agrobacterium is a genus of Gram-negative bacteria established by H. J. Conn that uses horizontal gene transfer to cause tumors in plants. Agrobacterium tumefaciens is the most commonly studied species in this genus. Agrobacterium is well known for its ability to transfer DNA between itself and plants, and for this reason it has become an important tool for genetic engineering.

<span class="mw-page-title-main">Transduction (genetics)</span> Transfer process in genetics

Transduction is the process by which foreign DNA is introduced into a cell by a virus or viral vector. An example is the viral transfer of DNA from one bacterium to another and hence an example of horizontal gene transfer. Transduction does not require physical contact between the cell donating the DNA and the cell receiving the DNA, and it is DNase resistant. Transduction is a common tool used by molecular biologists to stably introduce a foreign gene into a host cell's genome.

<span class="mw-page-title-main">Transfer DNA</span> Type of DNA in bacterial genomes

The transfer DNA is the transferred DNA of the tumor-inducing (Ti) plasmid of some species of bacteria such as Agrobacterium tumefaciens and Agrobacterium rhizogenes . The T-DNA is transferred from bacterium into the host plant's nuclear DNA genome. The capability of this specialized tumor-inducing (Ti) plasmid is attributed to two essential regions required for DNA transfer to the host cell. The T-DNA is bordered by 25-base-pair repeats on each end. Transfer is initiated at the right border and terminated at the left border and requires the vir genes of the Ti plasmid.

Pathogenicity islands (PAIs), as termed in 1990, are a distinct class of genomic islands acquired by microorganisms through horizontal gene transfer. Pathogenicity islands are found in both animal and plant pathogens. Additionally, PAIs are found in both gram-positive and gram-negative bacteria. They are transferred through horizontal gene transfer events such as transfer by a plasmid, phage, or conjugative transposon. Therefore, PAIs contribute to microorganisms' ability to evolve.

<span class="mw-page-title-main">Ti plasmid</span> Circular plasmid used in creation of transgenic plants

A tumour inducing (Ti) plasmid is a plasmid found in pathogenic species of Agrobacterium, including A. tumefaciens, A. rhizogenes, A. rubi and A. vitis.

<span class="mw-page-title-main">Gene delivery</span> Introduction of foreign genetic material into host cells

Gene delivery is the process of introducing foreign genetic material, such as DNA or RNA, into host cells. Gene delivery must reach the genome of the host cell to induce gene expression. Successful gene delivery requires the foreign gene delivery to remain stable within the host cell and can either integrate into the genome or replicate independently of it. This requires foreign DNA to be synthesized as part of a vector, which is designed to enter the desired host cell and deliver the transgene to that cell's genome. Vectors utilized as the method for gene delivery can be divided into two categories, recombinant viruses and synthetic vectors.

P1 is a temperate bacteriophage that infects Escherichia coli and some other bacteria. When undergoing a lysogenic cycle the phage genome exists as a plasmid in the bacterium unlike other phages that integrate into the host DNA. P1 has an icosahedral head containing the DNA attached to a contractile tail with six tail fibers. The P1 phage has gained research interest because it can be used to transfer DNA from one bacterial cell to another in a process known as transduction. As it replicates during its lytic cycle it captures fragments of the host chromosome. If the resulting viral particles are used to infect a different host the captured DNA fragments can be integrated into the new host's genome. This method of in vivo genetic engineering was widely used for many years and is still used today, though to a lesser extent. P1 can also be used to create the P1-derived artificial chromosome cloning vector which can carry relatively large fragments of DNA. P1 encodes a site-specific recombinase, Cre, that is widely used to carry out cell-specific or time-specific DNA recombination by flanking the target DNA with loxP sites.

A transfer DNA (T-DNA) binary system is a pair of plasmids consisting of a T-DNA binary vector and a virhelper plasmid. The two plasmids are used together to produce genetically modified plants. They are artificial vectors that have been derived from the naturally occurring Ti plasmid found in bacterial species of the genus Agrobacterium, such as A. tumefaciens. The binary vector is a shuttle vector, so-called because it is able to replicate in multiple hosts.

In molecular cloning, a vector is any particle used as a vehicle to artificially carry a foreign nucleic sequence – usually DNA – into another cell, where it can be replicated and/or expressed. A vector containing foreign DNA is termed recombinant DNA. The four major types of vectors are plasmids, viral vectors, cosmids, and artificial chromosomes. Of these, the most commonly used vectors are plasmids. Common to all engineered vectors are an origin of replication, a multicloning site, and a selectable marker.

<span class="mw-page-title-main">History of genetic engineering</span>

Genetic engineering is the science of manipulating genetic material of an organism. The concept of genetic engineering was first proposed by Nikolay Timofeev-Ressovsky in 1934. The first artificial genetic modification accomplished using biotechnology was transgenesis, the process of transferring genes from one organism to another, first accomplished by Herbert Boyer and Stanley Cohen in 1973. It was the result of a series of advancements in techniques that allowed the direct modification of the genome. Important advances included the discovery of restriction enzymes and DNA ligases, the ability to design plasmids and technologies like polymerase chain reaction and sequencing. Transformation of the DNA into a host organism was accomplished with the invention of biolistics, Agrobacterium-mediated recombination and microinjection. The first genetically modified animal was a mouse created in 1974 by Rudolf Jaenisch. In 1976, the technology was commercialised, with the advent of genetically modified bacteria that produced somatostatin, followed by insulin in 1978. In 1983, an antibiotic resistant gene was inserted into tobacco, leading to the first genetically engineered plant. Advances followed that allowed scientists to manipulate and add genes to a variety of different organisms and induce a range of different effects. Plants were first commercialized with virus resistant tobacco released in China in 1992. The first genetically modified food was the Flavr Savr tomato marketed in 1994. By 2010, 29 countries had planted commercialized biotech crops. In 2000 a paper published in Science introduced golden rice, the first food developed with increased nutrient value.

<span class="mw-page-title-main">Genetic engineering techniques</span> Methods used to change the DNA of organisms

Genetic engineering techniques allow the modification of animal and plant genomes. Techniques have been devised to insert, delete, and modify DNA at multiple levels, ranging from a specific base pair in a specific gene to entire genes. There are a number of steps that are followed before a genetically modified organism (GMO) is created. Genetic engineers must first choose what gene they wish to insert, modify, or delete. The gene must then be isolated and incorporated, along with other genetic elements, into a suitable vector. This vector is then used to insert the gene into the host genome, creating a transgenic or edited organism.

EHA101 was one of the first and most widely used Agrobacterium helper plasmid for plant gene transfer. Created in 1985 in the laboratory of Mary-Dell Chilton at Washington University in St. Louis, it was named after the graduate student who constructed it. The EH stands for "Elizabeth Hood" and A for "Agrobacterium". The EHA101 helper strain is a derivative of A281, the hypervirulent A. tumefaciens strain that causes large, fast-growing tumors on solanaceous plants. This strain is used for moving genes of interest into many hundreds of species of plants all over the world.

Transient expression, more frequently referred to "transient gene expression", is the temporary expression of genes that are expressed for a short time after nucleic acid, most frequently plasmid DNA encoding an expression cassette, has been introduced into eukaryotic cells with a chemical delivery agent like calcium phosphate (CaPi) or polyethyleneimine (PEI). However, unlike "stable expression," the foreign DNA does not fuse with the host cell DNA, resulting in the inevitable loss of the vector after several cell replication cycles. The majority of transient gene expressions are done with cultivated animal cells. The technique is also used in plant cells; however, the transfer of nucleic acids into these cells requires different methods than those with animal cells. In both plants and animals, transient expression should result in a time-limited use of transferred nucleic acids, since any long-term expression would be called "stable expression."

Patricia C. Zambryski is a plant and microbial scientist known for her work on Type IV secretion and cell-to-cell transport in plants. She is also professor emeritus at the University of California, Berkeley.

The root inducing (Ri) -plasmid of Rhizobium rhizogenes is a plasmid capable of undergoing horizontal gene transfer of its transfer DNA (T-DNA), upon contact with a plant host. The T-DNA of the Ri-plasmid affects the plant host in such a way, that gene expression is altered, especially in regard to phytohormonal balances, metabolism and certain phenotypical characteristics.

References

  1. ↑ Goldstein, Daniel A.; Tinland, Bruno; Gilbertson, Lawrence A.; Staub, J.M.; Bannon, G.A.; Goodman, R.E.; McCoy, R.L.; Silvanovich, A. (2005). "Human safety and genetically modified plants: a review of antibiotic resistance markers and future transformation selection technologies". Journal of Applied Microbiology . 99 (1). Society for Applied Microbiology (Wiley): 7–23. doi:10.1111/j.1365-2672.2005.02595.x. ISSN   1364-5072. PMID   15960661. S2CID   40454719.
  2. ↑ Lemaux, Peggy G. (2008). "Genetically Engineered Plants and Foods: A Scientist's Analysis of the Issues (Part I)". Annual Review of Plant Biology . 59 (1). Annual Reviews: 771–812. doi:10.1146/annurev.arplant.58.032806.103840. ISSN   1543-5008. PMID   18284373.
  3. 1 2 Hooykaas, Paul J. J.; Schilperoort, Rob A. (1992-05-01). "Agrobacterium and plant genetic engineering". Plant Molecular Biology. 19 (1): 15–38. doi:10.1007/BF00015604. ISSN   1573-5028. PMID   1600167. S2CID   36172990.
  4. 1 2 Zupan, J. R.; Zambryski, P. (1995-04-01). "Transfer of T-DNA from Agrobacterium to the Plant Cell". Plant Physiology. 107 (4): 1041–1047. doi:10.1104/pp.107.4.1041. ISSN   0032-0889. PMC   157234 . PMID   7770515.
  5. ↑ Jeon, Geoung-A; Eum, Jin-seong; Sim, Woong Seop (1998-02-01). "The Role of Inverted Repeat (IR) Sequence of the virE Gene Expression in Agrobacterium tumefaciens pTiA6". Molecules and Cells. 8 (1): 49–53. doi: 10.1016/S1016-8478(23)13391-7 . ISSN   1016-8478. PMID   9571631.
  6. ↑ Cangelosi, G A; Martinetti, G; Leigh, J A; Lee, C C; Theines, C; Nester, E W (March 1989). "Role for [corrected] Agrobacterium tumefaciens ChvA protein in export of beta-1,2-glucan". Journal of Bacteriology. 171 (3): 1609–1615. doi:10.1128/jb.171.3.1609-1615.1989. ISSN   0021-9193. PMC   209788 . PMID   2921245.
  7. ↑ Ankenbauer, R G; Nester, E W (November 1990). "Sugar-mediated induction of Agrobacterium tumefaciens virulence genes: structural specificity and activities of monosaccharides". Journal of Bacteriology. 172 (11): 6442–6446. doi:10.1128/jb.172.11.6442-6446.1990. ISSN   0021-9193. PMC   526831 . PMID   2121715.
  8. ↑ Cangelosi, G A; Ankenbauer, R G; Nester, E W (September 1990). "Sugars induce the Agrobacterium virulence genes through a periplasmic binding protein and a transmembrane signal protein". Proceedings of the National Academy of Sciences. 87 (17): 6708–6712. Bibcode:1990PNAS...87.6708C. doi: 10.1073/pnas.87.17.6708 . ISSN   0027-8424. PMC   54606 . PMID   2118656.
  9. 1 2 Cangelosi, Gerard A.; Abest, Elaine; Martinetti, Gladys; Nester, Eugene W. (1991), "Genetic Analysis of Agrobacterium", Bacterial Genetic Systems, Methods in Enzymology, vol. 204, Elsevier, pp. 384–397, doi:10.1016/0076-6879(91)04020-o, ISBN   978-0-12-182105-0, PMID   1658565 , retrieved 2024-03-09
  10. ↑ Matthysse, A G (May 1983). "Role of bacterial cellulose fibrils in Agrobacterium tumefaciens infection". Journal of Bacteriology. 154 (2): 906–915. doi:10.1128/jb.154.2.906-915.1983. ISSN   0021-9193. PMC   217544 . PMID   6302086.
  11. ↑ Cangelosi, G A; Hung, L; Puvanesarajah, V; Stacey, G; Ozga, D A; Leigh, J A; Nester, E W (May 1987). "Common loci for Agrobacterium tumefaciens and Rhizobium meliloti exopolysaccharide synthesis and their roles in plant interactions". Journal of Bacteriology. 169 (5): 2086–2091. doi:10.1128/jb.169.5.2086-2091.1987. ISSN   0021-9193. PMC   212098 . PMID   3571162.
  12. ↑ Matthysse, Ann G. (October 1987). "Effect of Plasmid pSa and of Auxin on Attachment of Agrobacterium tumefaciens to Carrot Cells". Applied and Environmental Microbiology. 53 (10): 2574–2582. Bibcode:1987ApEnM..53.2574M. doi:10.1128/aem.53.10.2574-2582.1987. ISSN   0099-2240. PMC   204148 . PMID   16347473.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.