Posnansky/Fronius PF-1 White Knight

Last updated

PF-1 White Knight
Role Glider
National origin Swiss/United States
Designer Hernan Posnansky and Robert L. Fronius
Introduction1963
Statussole example still operational
Number builtone

The Posnansky/Fronius PF-1 White Knight is a Swiss/American FAI Standard Class high-wing, T-tailed, single-seat glider that was designed and constructed by Hernan Posnansky and later greatly redesigned by Posnansky and Robert L. Fronius. [1] [2]

Contents

Design and development

The PF-1 was initially constructed by Posnansky in Switzerland in 1963, while he was a student at ETH Zurich there. The aircraft resembles the FFA Diamant, which was also under construction at the same time and place. Posnansky flew the aircraft for one year and then later moved to San Diego, California. The aircraft was inactive until 1983. Posnansky and Fronius greatly modified the PF-1 and re-licensed it as a US Experimental - Amateur-built , N15PF, in 1983. [1] [2] [3]

The PF-1 is of mixed construction. The fuselage is a glass and foam sandwich, while the wings are from a Schleicher Ka 8 and thus have spruce spars covered in birch plywood and doped aircraft fabric covering. The wing employs a NACA 64-415 airfoil and has terminal velocity dive brakes on the top and bottom surfaces. The tow hook is mounted on the aircraft's center of gravity. The landing gear is a fixed and faired monowheel. The cockpit features a reclined pilot position and a side-stick. [1] [2] [4]

Even though it uses the same wing as the Ka 8 the White Knight has a glide ratio that is seven points higher, due to the more streamlined fuselage. [1] [2]

Only one PF-1 was ever built. [1] [2] [3]

Operational history

As of June 2011 the PF-1 was still on the Federal Aviation Administration registry and co-owned by Posnansky and Fronius. [3]

Specifications (PF-1)

Data from Sailplane Directory and Soaring [1] [2]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

Schweizer SGS 1-29 American sailplane

The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.

Leonard Annebula American glider

The Leonard Annebula is an American high-wing, single-seat FAI Standard Class glider designed by Bob Leonard of Wichita, Kansas, based on the Hall Cherokee II.

Schreder Airmate HP-11 US single-seat glider, 1962

The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.

Bartos/Nobel BN-1 Phantom

The Bartos/Nobel BN-1 Phantom is an American, two-seat, mid-wing glider designed by Gene Bartos in the late 1960s.

Bowlus BZ-1 American glider

The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.

The Chase-Sisley C100-S is an American mid-wing, single seat FAI Open Class glider that was designed in the 1960s by Dr. Robert Chase.

The Bennett-Carter CBS-1 Dottie S is an American high-wing, strut-braced single-seat glider that was designed by George Bennett and Richard Carter and first flown in 1958.

The Hutchinson HS-127 is an American mid-wing glider that was designed and built by Vernon Hutchinson.

Melsheimer FM-1 1968 American glider

The Melsheimer FM-1 is an American single-seat, high-wing, FAI Open Class glider that was designed and constructed by Frank Melsheimer.

The Moore SS-1 is an American high-wing, single seat, FAI Standard Class glider that was designed and constructed by Arien C. Moore of Sweet Home, Oregon.

FFA Diamant

The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.

Prue 160 American glider

The Prue 160 was an American mid-wing, V-tailed, single-seat glider that was designed and built by Irving Prue in 1945.

The Prue 215 is an American high-wing, V-tailed, single-seat glider that was designed by Irving Prue in 1949.

Midwest MU-1

The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.

The Schultz Nucleon is an American high-wing strut-braced, single-seat glider that was designed and constructed by Arthur B. Schultz.

The Stanley Nomad is an American mid-wing, V-tailed, single seat glider that was designed and constructed by Robert M. Stanley in 1938.

The Trager-Bierens T-3 Alibi is an American high-wing, V-tailed, single seat glider that was designed and constructed by Kempes Trager and John Bierens.

Tweed GT-1 American glider

The Tweed GT-1 is an American high-wing, FAI Open Class single seat glider that was designed by George Tweed Jr.

Scheibe Zugvogel German single-seat glider, 1954

The Scheibe Zugvogel is a West German, high-wing, single-seat, FAI Open Class glider that was produced by Scheibe Flugzeugbau. The first version was designed by Rudolph Kaiser and subsequent versions by Egon Scheibe.

The Haufe Buzzer 2 is an American high-wing, strut-braced single-seat motor glider that was designed and constructed by Walter Haufe.

References

  1. 1 2 3 4 5 6 Activate Media (2006). "White Knight PF-1 Posnansky". Archived from the original on August 19, 2012. Retrieved June 9, 2011.
  2. 1 2 3 4 5 6 Said, Bob: 1983 Sailplane Directory, Soaring Magazine , page 52. Soaring Society of America November 1983. USPS 499-920
  3. 1 2 3 Federal Aviation Administration (June 2011). "Make / Model Inquiry Results" . Retrieved June 9, 2011.
  4. Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on April 20, 2010. Retrieved June 9, 2011.