Printrbot

Last updated
Printrbot
Industry3D Printing
Founded2011
FounderBrook Drumm
Headquarters
Lincoln
,
California
Website printrbot.com

Printrbot is a 3D printer company created by Brook Drumm in 2011 and originally funded through Kickstarter. Printrbot printers use fused deposition modelling to manufacture 3-dimensional artifacts.

Contents

Printrbot's older designs including STLs are publicly available on GitHub. [1]

History

Printbot was founded by Brook Drumm in 2011 as Printbot, Inc. [2]

Printrbot was the most funded technology project on Kickstarter when in December 2011, it raised US $830,827 through crowdfunding. [3]

It closed operations in 2018 due to "low sales". [4] [5] It resurfaced again in 2020 as Printbot, LLC. Drumm is also the CEO. [2]

Design and operation

Models are printed by depositing molten ABS or PLA plastic filament onto a hotbed from a print head which moves about the X and Z axes using stepper-motors, guided by metal threaded rods. [6] The models to be printed are sent to the printer via a USB interface using specialized software such Repetier-Host (recommended by the manufacturer for use with newer printers) or Pronterface (recommended by the manufacturer at the time of Printrbot's initial launch).

Assembly

Printrbot has sold both fully assembled printers and build it yourself kits. [7]

Filament

Printrbot models can print in ABS or PLA plastic filament which can be purchased from the official store or other sources. [8] Printrbot models can be outfitted to accept 1.75 mm or 3.0 mm diameter filament. The filament is available in many colors. Although the Printrbot hotend and extruder system is advertised to work with PLA and ABS, it is also capable of extruding many other filaments. Printrbot sells "exotic" filaments such as Nylon, Ninjaflex, and Carbon fiber-reinforced PLA.

Hardware

All Printrbots are controlled by nearly similar open source circuit boards called Printrboards. The Printrboard has experienced several revisions and is identified by revision letters printed on them. For example, the most recent official revision of the Printrboard is Rev F, which can be purchased separately. The Printrboard can have many types of firmware loaded on it, but they are sold with an open-source firmware from the RepRap Project called Marlin. The printer is controlled through a USB interface. [9] [6]

Printrbot had an exclusive arrangement with Carl Ubis [10] to use his Ubis Hot Ends in the Printrbot printers. A hot end is the part of the 3D printer that melts the filament and extrude it out of the nozzle to make your 3D print.

Software

Printrbot does not come with any software and the official getting started guide recommends using the freeware program Cura 1.5 with Pronterface to interface with the printer. A freeware program with 3D visualization called Repetier-Host is also used.

Cura is one software option for driving your Printrbot printer. [11]

The Printrbot interprets G-code produced by a computer program called a slicer, turning commands into outputs for four stepper motors, heated bed and extruder outputs, and a cooling fan port. [12]

Import 3D models (oftentimes STL files from Thingiverse or user created in apps like Autodesk Fusion 360). The user can rotate and scale the 3D model to fit the virtual print bed. They can then convert the 3D model into G-Code that the printrbot can understand.

The user can then print directly to their printrbot via USB or use a SD or miniSD card to transfer the print file.

Printrbot in education

At the beginning of 2015, Printrbot announced two new initiatives to help schools gain access to 3D printers. [13] The first program, named Printrbot Ambassadors, let registered schools borrow an assembled Printrbot Simple Metal with an Alu handle, spool holder and 1 kg of filament for a month for cost of shipping. After the month, the school had the option to buy the 3D printer at a reduced price or to send it back to Printrbot. The second program allowed schools to buy a Printrbot Simple Metal at a discount. Users needed to buy through a school and agree to be featured on a public listing. As of August 2, 2015, approximately 126 schools and universities were using Printrbot 3D printers. [14]

Models

Current models

ModelModel No.Years availableBuild volume (mm)Build volume (in)Filament
Printrbot Pro Limited Release2020202012" x 12" x 12"12" x 12" x 12"Any filament. Yes, any.
Printrbot Metal Plus14122014–2018250 mm × 250 mm × 250 mm10 in × 10 in × 10 inABS+PLA
Printrbot Play [15] 15052015–2018100 mm × 100 mm × 130 mm4 in × 4 in × 5 inPLA
Printrbot CNC Beta 01 [16] 2014–2018360 mm × 460 mm × 100 mm14 in × 18 in × 4 inN/A
Printrbot Crawlbot [17] 2015–20181,219 mm × 2,438 mm × 51 mm48 in × 96 in × 2 inN/A
Printbot Go Large V22015-2018330 mm × 610 mm13 in × 24 inABS

Printrbot Pro

On May 14, 2015, Brook Drumm introduced the Printrbot Pro, [18] a large-scale 3D printer. According to Drumm, the Printrbot Pro has a build volume of about 2 cubic feet, a heated bed, a dual-extruder setup with the ability to print multiple materials. The printer also offers an optional enclosed build chamber, an LCD panel, a SD card slot as well as LED lighting.

Printrbot Play and Play v2

ModelModel No.ImageColor offeredYear availableBuild volume (mm)Build volume (inch)Min. Layer Height (micron)FilamentConnectivityComments
Play1505Red, Black, White, Gray
Play V2 White2018150 mm × 200 mm × 150 mm5.9 in × 7.9 in × 5.9 in50USB-tetherLimited offers (<10 sold?)

Discontinued models

ModelModel No.ImageYears availableBuild volume (mm)Build volume(inch)FilamentComments
Printrbot Smalls2016?100 mm x 100 mm x 150 mm4in x 4in x 6inPLA and PLA-compositesMetal Kit build. Extra use of 3D-printed parts in printer pieces...
Printrbot Simple Metal1403 Printrbot Simple (360deg turntable view) (14007316573).jpg 2014–2018150 mm × 150 mm × 150 mm6 in × 6 in × 6 in1.75 mm PLA (Heated build platform for ABS use available)
Printrbot Simple 20141405100 mm × 100 mm × 100 mm4 in × 4 in × 4 in1.75 mm PLA onlyLargest model available
Printrbot Jr.150 mm × 150 mm × 150 mm6 in × 6 in × 6 in PLA onlyCan be folded for storage.
Printrbot LC1302 or 1308150 mm × 150 mm × 150 mm6 in × 6 in × 6 inABS+PLA
Printrbot GO2013200 mm × 180 mm × 150 mm8 in × 7 in × 6 inPLA+ABSSuitcase form factor, designed in collaboration with Ben Heck
Printrbot (original) Printrbot.jpg 150 mm × 150 mm × 150 mm6 in × 6 in × 6 inABS

See also

Related Research Articles

<span class="mw-page-title-main">RepRap</span> Self-replicating 3D printer initiative

RepRap is a project to develop a low-cost 3D printer that can print most of its own components. As an open design, all of the designs produced by the project are released under a free software license, the GNU General Public License.

Digital modeling and fabrication is a design and production process that combines 3D modeling or computing-aided design (CAD) with additive and subtractive manufacturing. Additive manufacturing is also known as 3D printing, while subtractive manufacturing may also be referred to as machining, and many other technologies can be exploited to physically produce the designed objects.

<span class="mw-page-title-main">MakerBot</span> American desktop 3D printer manufacturer company

MakerBot Industries, LLC was an American desktop 3D printer manufacturer company headquartered in New York City. It was founded in January 2009 by Bre Pettis, Adam Mayer, and Zach "Hoeken" Smith to build on the early progress of the RepRap Project. It was acquired by Stratasys in June 2013. As of April 2016, MakerBot had sold over 100,000 desktop 3D printers worldwide. Between 2009 and 2019, the company released 7 generations of 3D printers, ending with the METHOD and METHOD X. It was at one point the leader of the desktop market with an important presence in the media, but its market share declined over the late 2010s. MakerBot also founded and operated Thingiverse, the largest online 3D printing community and file repository. In August 2022, the company completed a merger with its long-time competitor Ultimaker. The combined company is known as UltiMaker, but retains the MakerBot name for its Sketch line of education-focused 3D printers.

<span class="mw-page-title-main">OpenSCAD</span> Free software for creating 3D objects

OpenSCAD is a free software application for creating solid 3D computer-aided design (CAD) objects. It is a script-only based modeller that uses its own description language; the 3D preview can be manipulated interactively, but cannot be interactively modified in 3D. Instead, an OpenSCAD script specifies geometric primitives and defines how they are modified and combined to render a 3D model. As such, the program performs constructive solid geometry (CSG). OpenSCAD is available for Windows, Linux, and macOS.

<span class="mw-page-title-main">Lyman filament extruder</span>

The Lyman filament extruder is a device for making 3-D printer filament suitable for use in 3-D printers like the RepRap. It is named after its developer Hugh Lyman and was the winner of the Desktop Factory Competition.

Hyrel 3D is a company which manufactures 3D Printers for home, office and industrial settings, and is based in Atlanta, GA. Hyrel 3D makes modular manufacturing machines that are capable of additive and subtractive processes, including fused deposition modeling. These systems use interchangeable heads that are used to create three-dimensional solid or hollow objects from a digital model, which can be designed or produced from a scan.

<span class="mw-page-title-main">Solidoodle</span> American 3D printing company (2011-2016)

Solidoodle was a 3D printer company headquartered in Brooklyn, New York. Solidoodle was founded in September 2011 by engineer Sam Cervantes. Solidoodle 3D printers use digital files supplied by the user to create physical plastic parts.

MatterHackers is an Orange County-based company founded in 2012 that supplies and sells 3D printing materials and tools. MatterHackers is developing their 3D printer control software, MatterControl.

<span class="mw-page-title-main">Ultimaker</span> Dutch 3D printer manufacturer

Ultimaker is a 3D printer-manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials. Their product line includes the Ultimaker S5 and S3, Ultimaker 3 series, Ultimaker 2+ series and Ultimaker Original+. These products are used by industries such as automotive, architecture, healthcare, education, and small scale manufacturing.

ROBO 3D is an American 3D printer manufacturer located in San Diego, California and traded in Australian Securities Exchange under symbol ASX: RBO.

<span class="mw-page-title-main">M3D (company)</span> American manufacturer of 3D printers

M3D, LLC is an American manufacturer of 3D printers in Fulton, Maryland. The company's flagship product is the "Micro 3D" or "Micro".

<span class="mw-page-title-main">Airwolf 3D</span>

Airwolf 3D is a company related to 3D printers.

Zortrax is a Polish manufacturer of 3D printers and filaments for SMB market and rapid prototyping for industries, including robotics and automation, architecture, industrial design, engineering, aviation, industrial automation. Zortrax machines work with dedicated software, firmware and filaments.

<span class="mw-page-title-main">Fused filament fabrication</span> 3D printing process

Fused filament fabrication (FFF), also known as fused deposition modeling, or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the growing work. The print head is moved under computer control to define the printed shape. Usually the head moves in two dimensions to deposit one horizontal plane, or layer, at a time; the work or the print head is then moved vertically by a small amount to begin a new layer. The speed of the extruder head may also be controlled to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. "Fused filament fabrication" was coined by the members of the RepRap project to give an acronym (FFF) that would be legally unconstrained in its use.

Fusion3 is a Greensboro, North Carolina company which manufactures 3D printers for commercial and education use. Fusion3 3D Printers use fused deposition modeling to create three-dimensional solid or hollow objects from a digital model, which can be designed or produced from a scan.

<span class="mw-page-title-main">Prusa i3</span> 3D printer product line and related designs

The Prusa i3 is a family of fused deposition modeling 3D printers, manufactured by Czech company Prusa Research under the trademarked name Original Prusa i3. Part of the RepRap project, Prusa i3 printers were called the most used 3D printer in the world in 2016. The first Prusa i3 was designed by Josef Průša in 2012, and was released as a commercial kit product in 2015. The latest model is available in both kit and factory assembled versions. The Prusa i3's comparable low cost and ease of construction and modification made it popular in education and with hobbyists and professionals, with the Prusa i3 model MK2 printer receiving several awards in 2016.

<span class="mw-page-title-main">Cura (software)</span> 3D printer software

Cura is an open source slicing application for 3D printers. It was created by David Braam who was later employed by Ultimaker, a 3D printer manufacturing company, to maintain the software. Cura is available under LGPLv3 license. Cura was initially released under the open source Affero General Public License version 3, but on 28 September 2017 the license was changed to LGPLv3. This change allowed for more integration with third-party CAD applications. Development is hosted on GitHub. Ultimaker Cura is used by over one million users worldwide and handles 1.4 million print jobs per week. It is the preferred 3D printing software for Ultimaker 3D printers, but it can be used with other printers as well.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

<span class="mw-page-title-main">3D printing filament</span> Thermoplastic feedstock for 3D printers

3D printing filament is the thermoplastic feedstock for fused deposition modeling 3D printers. There are many types of filament available with different properties.

Multi-material 3D printing is the additive manufacturing procedure of using multiple materials at the same time to fabricate an object. Similar to single material additive manufacturing it can be realised through methods such as FFF, SLA and Inkjet 3D printing. By expanding the design space to different materials, it establishes the possibilities of creating 3D printed objects of different color or with different material properties like elasticity or solubility. The first multi-material 3D printer Fab@Home became publicly available in 2006. The concept was quickly adopted by the industry followed by many consumer ready multi-material 3D printers.

References

  1. ↑ Drumm, Brook (2019-08-23). "printrbot designs". GitHub . Retrieved 2022-02-15.
  2. 1 2 "Brook Drumm Personal Website". brookdrumm.com. Retrieved 2023-02-12.
  3. ↑ Dobby, Christine (April 18, 2012). "A case for crowdfunding; New U.S. rules for raising growth capital spark Canadian funding worries". FinancialPost.com. National Post . Retrieved Nov 18, 2012.
  4. ↑ "Printrbot, Lincoln-based maker of inexpensive 3D printers, files for bankruptcy". bizjournals.com. 2018-08-08. Retrieved 2023-02-12.
  5. ↑ "A Farewell to Printrbot". Hackaday. 2018-07-19. Retrieved 2018-08-13.
  6. 1 2 Stephen Cass,"A desktop 3-D printer builds plastic objects layer by layer", MIT Technology Review, April 25, 2012
  7. ↑ "Printrbot Play Review: Ideal for Beginners". All3DP. 2015-11-26. Retrieved 2023-02-12.
  8. ↑ ""Printrbot shop"". Archived from the original on 2016-03-04. Retrieved 2012-11-17.
  9. ↑ "Printrbot: Your First 3D Printer", Kickstarter, Nov 17, 2011
  10. ↑ "UBIS Hotend on an Ultimaker | Ultimaker: 3D Printers". ultimaker.com. Archived from the original on 2017-03-12.
  11. ↑ "The PrintrBot Simple and CURA/Flash and Get the Software/Then Go, Go, GO!". Instructables. Retrieved 2023-02-12.
  12. ↑ "Listening to G-Code and the PrintrBot Simple (1403)". Instructables. Retrieved 2023-02-12.
  13. ↑ "Printrbot and Education – Two New Programs | Printrbot Learn". Archived from the original on 2018-07-18. Retrieved 2016-02-04.
  14. ↑ "Printrbots in Schools | Printrbot". Archived from the original on 2016-06-24. Retrieved 2016-02-04.
  15. ↑ "Printrbot Play (4x4x5)". Printrbot.com. Printrbot. Retrieved 8 June 2015.
  16. ↑ "Printrbot CNC Beta 01 | Printrbot". printrbot.com. Archived from the original on 2015-03-14.
  17. ↑ "Crawlbot | Printrbot". printrbot.com. Archived from the original on 2015-10-11.
  18. ↑ "Brook Drumm announces large-scale Printrbot Pro 3D printer featuring a two-cubic foot build volume". 3ders.org. 2015-05-15. Retrieved 2023-02-12.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.