Quasinormal mode

Last updated

Quasinormal modes (QNM) are the modes of energy dissipation of a perturbed object or field, i.e. they describe perturbations of a field that decay in time.

Contents

Example

A familiar example is the perturbation (gentle tap) of a wine glass with a knife: the glass begins to ring, it rings with a set, or superposition, of its natural frequencies — its modes of sonic energy dissipation. One could call these modes normal if the glass went on ringing forever. Here the amplitude of oscillation decays in time, so we call its modes quasi-normal. To a high degree of accuracy, quasinormal ringing can be approximated by

where is the amplitude of oscillation, is the frequency, and is the decay rate. The quasinormal frequency is described by two numbers,

or, more compactly

Here, is what is commonly referred to as the quasinormal mode frequency. It is a complex number with two pieces of information: real part is the temporal oscillation; imaginary part is the temporal, exponential decay.

In certain cases the amplitude of the wave decays quickly, to follow the decay for a longer time one may plot

Mathematical physics

In theoretical physics, a quasinormal mode is a formal solution of linearized differential equations (such as the linearized equations of general relativity constraining perturbations around a black hole solution) with a complex eigenvalue (frequency). [1] [2]

Black holes have many quasinormal modes (also: ringing modes) that describe the exponential decrease of asymmetry of the black hole in time as it evolves towards the perfect spherical shape.

Recently, the properties of quasinormal modes have been tested in the context of the AdS/CFT correspondence. Also, the asymptotic behavior of quasinormal modes was proposed to be related to the Immirzi parameter in loop quantum gravity, but convincing arguments have not been found yet.

Electromagnetism and photonics

There are essentially two types of resonators in optics. In the first type, a high-Q factor optical microcavity is achieved with lossless dielectric optical materials, with mode volumes of the order of a cubic wavelength, essentially limited by the diffraction limit. Famous examples of high-Q microcavities are micropillar cavities, microtoroid resonators, photonic-crystal cavities. In the second type of resonators, the characteristic size is well below the diffraction limit, routinely by 2-3 orders of magnitude. In such small volumes, energies are stored for a small period of time. A plasmonic nanoantenna supporting a localized surface plasmon quasinormal mode essentially behaves as a poor antenna that radiates energy rather than stores it. Thus, as the optical mode becomes deeply sub-wavelength in all three dimensions, independent of its shape, the Q-factor is limited to about 10 or less.

Formally, the resonances (i.e., the quasinormal mode) of an open (non-Hermitian) electromagnetic micro or nanoresonators are all found by solving the time-harmonic source-free Maxwell’s equations with a complex frequency, the real part being the resonance frequency and the imaginary part the damping rate. The damping is due to energy loses via leakage (the resonator is coupled to the open space surrounding it) and/or material absorption. Quasinormal-mode solvers exist to efficiently compute and normalize all kinds of modes of plasmonic nanoresonators and photonic microcavities. The proper normalisation of the mode leads to the important concept of mode volume of non-Hermitian (open and lossy) systems. The mode volume directly impact the physics of the interaction of light and electrons with optical resonance, e.g. the local density of electromagnetic states, Purcell effect, cavity perturbation theory, strong interaction with quantum emitters, superradiance. [3]

Biophysics

In computational biophysics, quasinormal modes, also called quasiharmonic modes, are derived from diagonalizing the matrix of equal-time correlations of atomic fluctuations.

See also

Related Research Articles

Spontaneous emission is the process in which a quantum mechanical system transits from an excited energy state to a lower energy state and emits a quantized amount of energy in the form of a photon. Spontaneous emission is ultimately responsible for most of the light we see all around us; it is so ubiquitous that there are many names given to what is essentially the same process. If atoms are excited by some means other than heating, the spontaneous emission is called luminescence. For example, fireflies are luminescent. And there are different forms of luminescence depending on how excited atoms are produced. If the excitation is effected by the absorption of radiation the spontaneous emission is called fluorescence. Sometimes molecules have a metastable level and continue to fluoresce long after the exciting radiation is turned off; this is called phosphorescence. Figurines that glow in the dark are phosphorescent. Lasers start via spontaneous emission, then during continuous operation work by stimulated emission.

<span class="mw-page-title-main">Resonance</span> Tendency to oscillate at certain frequencies

Resonance occurs in an oscillatory dynamical systems when an external, time-varying force coincides with the a natural frequency of the system. Resonance can occur in various systems, such as mechanical, electrical, or acoustic systems, and it is desirable in certain applications, such as musical instruments or radio receivers. Resonance can also be undesirable, leading to excessive vibrations or even structural failure in some cases.

<i>Q</i> factor Parameter describing the longevity of energy in a resonator relative to its resonant frequency

In physics and engineering, the quality factor or Q factor is a dimensionless parameter that describes how underdamped an oscillator or resonator is. It is defined as the ratio of the initial energy stored in the resonator to the energy lost in one radian of the cycle of oscillation. Q factor is alternatively defined as the ratio of a resonator's centre frequency to its bandwidth when subject to an oscillating driving force. These two definitions give numerically similar, but not identical, results. Higher Q indicates a lower rate of energy loss and the oscillations die out more slowly. A pendulum suspended from a high-quality bearing, oscillating in air, has a high Q, while a pendulum immersed in oil has a low one. Resonators with high quality factors have low damping, so that they ring or vibrate longer.

<span class="mw-page-title-main">Normal mode</span> Pattern of oscillating motion in a system

A normal mode of a dynamical system is a pattern of motion in which all parts of the system move sinusoidally with the same frequency and with a fixed phase relation. The free motion described by the normal modes takes place at fixed frequencies. These fixed frequencies of the normal modes of a system are known as its natural frequencies or resonant frequencies. A physical object, such as a building, bridge, or molecule, has a set of normal modes and their natural frequencies that depend on its structure, materials and boundary conditions.

<span class="mw-page-title-main">Optical ring resonators</span>

An optical ring resonator is a set of waveguides in which at least one is a closed loop coupled to some sort of light input and output. The concepts behind optical ring resonators are the same as those behind whispering galleries except that they use light and obey the properties behind constructive interference and total internal reflection. When light of the resonant wavelength is passed through the loop from the input waveguide, the light builds up in intensity over multiple round-trips owing to constructive interference and is output to the output bus waveguide which serves as a detector waveguide. Because only a select few wavelengths will be at resonance within the loop, the optical ring resonator functions as a filter. Additionally, as implied earlier, two or more ring waveguides can be coupled to each other to form an add/drop optical filter.

<span class="mw-page-title-main">Two-state quantum system</span> Simple quantum mechanical system

In quantum mechanics, a two-state system is a quantum system that can exist in any quantum superposition of two independent quantum states. The Hilbert space describing such a system is two-dimensional. Therefore, a complete basis spanning the space will consist of two independent states. Any two-state system can also be seen as a qubit.

The Rabi frequency is the frequency at which the probability amplitudes of two atomic energy levels fluctuate in an oscillating electromagnetic field. It is proportional to the transition dipole moment of the two levels and to the amplitude of the electromagnetic field. Population transfer between the levels of such a 2-level system illuminated with light exactly resonant with the difference in energy between the two levels will occur at the Rabi frequency; when the incident light is detuned from this energy difference then the population transfer occurs at the generalized Rabi frequency. The Rabi frequency is a semiclassical concept since it treats the atom as an object with quantized energy levels and the electromagnetic field as a continuous wave.

<span class="mw-page-title-main">Jaynes–Cummings model</span> Model in quantum optics

The Jaynes–Cummings model is a theoretical model in quantum optics. It describes the system of a two-level atom interacting with a quantized mode of an optical cavity, with or without the presence of light. It was originally developed to study the interaction of atoms with the quantized electromagnetic field in order to investigate the phenomena of spontaneous emission and absorption of photons in a cavity.

Resonance fluorescence is the process in which a two-level atom system interacts with the quantum electromagnetic field if the field is driven at a frequency near to the natural frequency of the atom.

A vacuum Rabi oscillation is a damped oscillation of an initially excited atom coupled to an electromagnetic resonator or cavity in which the atom alternately emits photon(s) into a single-mode electromagnetic cavity and reabsorbs them. The atom interacts with a single-mode field confined to a limited volume V in an optical cavity. Spontaneous emission is a consequence of coupling between the atom and the vacuum fluctuations of the cavity field.

<span class="mw-page-title-main">Vibration</span> Mechanical oscillations about an equilibrium point

Vibration is a mechanical phenomenon whereby oscillations occur about an equilibrium point. Vibration may be deterministic if the oscillations can be characterised precisely, or random if the oscillations can only be analysed statistically.

Coupled mode theory (CMT) is a perturbational approach for analyzing the coupling of vibrational systems in space or in time. Coupled mode theory allows a wide range of devices and systems to be modeled as one or more coupled resonators. In optics, such systems include laser cavities, photonic crystal slabs, metamaterials, and ring resonators.

<span class="mw-page-title-main">Surface plasmon polariton</span> Electromagnetic waves that travel along an interface

Surface plasmon polaritons (SPPs) are electromagnetic waves that travel along a metal–dielectric or metal–air interface, practically in the infrared or visible-frequency. The term "surface plasmon polariton" explains that the wave involves both charge motion in the metal and electromagnetic waves in the air or dielectric ("polariton").

In mathematics and electronics, cavity perturbation theory describes methods for derivation of perturbation formulae for performance changes of a cavity resonator.

The Maxwell–Bloch equations, also called the optical Bloch equations describe the dynamics of a two-state quantum system interacting with the electromagnetic mode of an optical resonator. They are analogous to the Bloch equations which describe the motion of the nuclear magnetic moment in an electromagnetic field. The equations can be derived either semiclassically or with the field fully quantized when certain approximations are made.

In optical physics, laser detuning is the tuning of a laser to a frequency that is slightly off from a quantum system's resonant frequency. When used as a noun, the laser detuning is the difference between the resonance frequency of the system and the laser's optical frequency. Lasers tuned to a frequency below the resonant frequency are called red-detuned, and lasers tuned above resonance are called blue-detuned.

In quantum mechanics, magnetic resonance is a resonant effect that can appear when a magnetic dipole is exposed to a static magnetic field and perturbed with another, oscillating electromagnetic field. Due to the static field, the dipole can assume a number of discrete energy eigenstates, depending on the value of its angular momentum (azimuthal) quantum number. The oscillating field can then make the dipole transit between its energy states with a certain probability and at a certain rate. The overall transition probability will depend on the field's frequency and the rate will depend on its amplitude. When the frequency of that field leads to the maximum possible transition probability between two states, a magnetic resonance has been achieved. In that case, the energy of the photons composing the oscillating field matches the energy difference between said states. If the dipole is tickled with a field oscillating far from resonance, it is unlikely to transition. That is analogous to other resonant effects, such as with the forced harmonic oscillator. The periodic transition between the different states is called Rabi cycle and the rate at which that happens is called Rabi frequency. The Rabi frequency should not be confused with the field's own frequency. Since many atomic nuclei species can behave as a magnetic dipole, this resonance technique is the basis of nuclear magnetic resonance, including nuclear magnetic resonance imaging and nuclear magnetic resonance spectroscopy.

A nanophotonic resonator or nanocavity is an optical cavity which is on the order of tens to hundreds of nanometers in size. Optical cavities are a major component of all lasers, they are responsible for providing amplification of a light source via positive feedback, a process known as amplified spontaneous emission or ASE. Nanophotonic resonators offer inherently higher light energy confinement than ordinary cavities, which means stronger light-material interactions, and therefore lower lasing threshold provided the quality factor of the resonator is high. Nanophotonic resonators can be made with photonic crystals, silicon, diamond, or metals such as gold.

<span class="mw-page-title-main">Cavity optomechanics</span>

Cavity optomechanics is a branch of physics which focuses on the interaction between light and mechanical objects on low-energy scales. It is a cross field of optics, quantum optics, solid-state physics and materials science. The motivation for research on cavity optomechanics comes from fundamental effects of quantum theory and gravity, as well as technological applications.

In quantum mechanics, the Schrödinger equation describes how a system changes with time. It does this by relating changes in the state of the system to the energy in the system. Therefore, once the Hamiltonian is known, the time dynamics are in principle known. All that remains is to plug the Hamiltonian into the Schrödinger equation and solve for the system state as a function of time.

References

  1. Konoplya, R. A.; Zhidenko, Alexander (2011-07-11). "Quasinormal modes of black holes: From astrophysics to string theory". Reviews of Modern Physics. 83 (3): 793–836. arXiv: 1102.4014 . Bibcode:2011RvMP...83..793K. doi:10.1103/RevModPhys.83.793. S2CID   118735176.
  2. Kokkotas, Kostas D.; Schmidt, Bernd G. (1999-01-01). "Quasi-Normal Modes of Stars and Black Holes". Living Reviews in Relativity. 2 (1): 2. arXiv: gr-qc/9909058 . Bibcode:1999LRR.....2....2K. doi:10.12942/lrr-1999-2. PMC   5253841 . PMID   28191830. Archived from the original on 2015-12-22. Retrieved 2015-10-29.
  3. Lalanne, P.; Yan, W.; Vynck, K.; Sauvan, C.; Hugonin, J.-P. (2018-04-17). "Light interaction with photonic and plasmonic resonances". Laser & Photonics Reviews. 12 (5): 1700113. arXiv: 1705.02433 . Bibcode:2018LPRv...1200113L. doi:10.1002/lpor.201700113. S2CID   51695476.